98400 Radio Remote Control Car
Product Information and Usage Guide
Product Information
- Product Name: Remote Control Car
- Model Numbers: 98400, 99800, 99900
- Frequency Bands: 2400MHz to 2483.5MHz
- Maximum Transmitting Power (EIRP): Not more than 10mW
- Manufacturer: RASTAR GROUP
- Manufacturer Address: Xinghui Industrial Park, Xiadao Road,
Shanghua, Chenghai, Shantou, Guangdong, China - Manufacturer Website: www.rastar.com
Product Usage Guide
Important Safety Instructions:
- If you come in contact with leaked liquid from the battery,
wash your skin or clothing immediately. - Dispose of batteries responsibly and do not dispose of them in
fire. - Do not operate the car on the streets where people gather or
under high voltage wires. - Do not drive the car in sand, through water, or snow.
- Avoid putting the car near heat or in direct sunlight.
- Always turn switches OFF after operating.
- Remove the batteries when the unit is not in use for long
periods. - Regularly examine the toy for any damage to its wires, plug,
enclosure, and other parts and do not use until the damage has been
repaired. - Choking hazard – small parts. Not for children under 3
years.
Battery Usage:
- For better preservation of rechargeable batteries, regularly
recharge them, and only use a charger of the same or equivalent
type. - When your vehicle starts to lose power, it may lose its
functions or performance. This indicates that it’s time to refresh
your batteries or recharge them. - Please replace the battery when the LED indicator becomes dark,
which means low battery.
Operating Instructions:
- Twist the lock of the battery cover using the fixing piece for
chassis. Please refer to picture 1 in the manual. - Put 5 X 1.5V AA batteries into the car according to polarity,
then close the lid and twist the chassis piece to lock the battery
cover. Please refer to picture 1 in the manual. - Put 2 X 1.5V AA batteries into the controller according to
polarity, then close the lid and twist the chassis piece to lock
the battery cover. Please refer to picture 1 in the manual. - Before playing, pair the transmitter with the model car as
follows:- The LED indicator on the transmitter will blink and be ready
for pairing. - Switch on the model car, and the LED on the transmitter will go
out. This means that the pairing process is completed. - Then, the model car can be fully controlled by the transmitter.
Please refer to picture 3 in the manual.
- The LED indicator on the transmitter will blink and be ready
- Adjust the direction adjustment switch to control the car
running in a straight line. Please refer to picture 3 in the
manual. - If you are using a 2.4GHz transmitter, it is compatible with
controlling several model cars at the same time without
interference, provided that the pairing process is orderly done one
by one following the above steps.
Maintenance:
- Clean the vehicle with a soft cloth and avoid exposure to
strong sunlight. - Regularly examine the toy for any damage to its wires, plug,
enclosure, and other parts and do not use until the damage has been
repaired.
Disclaimer:
The picture in the manual is for reference only and subject to
actual product.
Skin or clothing is to be washed immediately if you make contact with leaked liquid from the battery.
For better preservation of rechargeable batteries, please regularly recharge them, and only a charger of the same or equivalent type is recommended to be used.
Dispose of batteries responsibly, do not dispose of in fire.
When your vehicle starts to lose power, it may lose its functions or performance. This indicates that it’s time to refresh your batteries or recharge them.
Do not operate your car on the streets where people gather or under
high voltage wires. Stay safe!
This manual is applicable to the following types of product: 98400,99800,99900.
Don’t drive your vehicle in sand, through water or snow.
Point the antenna of the remote control upward to the car, and control the car within the effective range, so as not to affect the play effect.
Don’t put your vehicle near heat or in direct sunlight. Always turn switches
OFF after operating.
Picture for reference only, subject to actual product.
MAINTENANCE
Remove the batteries when the unit is not in use for long periods. Clean the vehicle with soft cloth. Avoid being heated or being exposed to strong sunlight. Keep dry. Regularly examine the toy for any damage to its wires, plug, enclosure and other
parts and they must not be used until the damage has been repaired.
Frequency bands: 2400MHz to 2483.5MHz Maximum Transmitting Power (EIRP) : Not more than 10mW.
WARNING:
CHOKING HAZARD-Small parts. Not for children under 3 years.
The instruction has to be kept since it contains important information.
RASTAR GROUP
Add:Xinghui Industrial Park, Xiadao Road, Shanghua,
Chenghai, Shantou, Guangdong, China.
Http://www.rastar.com
01.04.98400.00801
OPERATION GUIDE
Direction adjustment Switch on
LED indicator blinks
When LED indicator goes out, pairing process is completed.
The fixing piece for chassis can be used to twist the lock of the battery
cover, please see the picture on the
right.See picture 1. Please open the lid and put 5 X 1.5V
“AA” batteries into the car according to
its polarity, then close the lid and twist
the chassis piece to lock the battery
cover. See picture 1. Please open the lid and put the 2 X
1.5V “AA” batteries into the controller according to its polarity, then close the
lid and twist the chassis piece to lock
the battery cover. See picture 1. Every time before playing, the transmitter
needs to pair with the model car as
follows:
The LED indicator on the transmitter will blink and ready for pairing.
Switch on the model car, the LED on the transmitter will go out. This
means the pairing process is
completed. Then the model car can
be fully controlled by the transmitter.
See picture 3. Adjust the direction adjustment switch
to control the car running in a straight
line. See picture 3. Please replace battery when LED
indicator becomes dark which means
low battery.
The speed of model car will slow down when battery is low. Please replace then.
2.4GHz transmitters are compatible to control several model cars at same
time without interference, provided that
the pairing process is orderly done one
by one following above steps. That is,
first transmitter finishes pairing with first
model car and keep their power on,
then second transmitter can begin to
pair with second model car…
Please turn off the model car after playing.
FEATURES & FUNCTION
This product uses 2.4GHz communication technology, which is compatible for multi-device and multi-user, with fast response speed, high response precision, and strong anti-interference capability.
FORWARD REVERSE
BATTERY
LEFT RIGHT
DIRECTION ADJUSTMENT
LOCK OF BATTERY COVER
ON-OFF SWITCH
BATTERY
Function: Forward, Reverse, Turn Left, Turn Right. Features: Authentic car styling with injection moulded body, independent suspension system.
CAUTION
Different types of batteries or new and used batteries are not to be mixed. Exhausted batteries are to be removed from the toy.
Batteries should be replaced by an adult. Batteries are to be inserted with the correct polarity. The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged. Batteries are to be charged by adult or by children at least 8 years old, leaked or damaged batteries are not to be charged.
Rechargeable batteries are only to be charged under adult supervision. Only batteries of the same or equivalent type are recommended to be used. The antenna, wire, USB wire or battery plug are not to be inserted into output
socket. Never put the batteries near fire or any source of heat, water or direct sunlight.



















