INSTALLATION INSTRUCTION
MEW-R201-02 Tamper
Resistant 20A Single Receptacle Outlet
Instruction Manual
SPECIFICATIONS
Single Receptacle , Side Wire
RATING: 125VAC , 20A , 60Hz
WARNING
- TO AVOID RISK OF FIRE. ELECTRICAL SHOCK AND DEATH, SWITCH OFF POWER AT CIRCUIT BREAKER OR FUSE BOX AND ENSURE THAT POWER IS OFF BEFORE STARTING ANY WORK.
- USE ONLY COPPER WIRE WITH THE DEVICE.
- INSTALL AND USE IN ACCORANCE WITH ALL APPRORIATE ELECTRICAL SAFETY CODES AND REGULATIONS
INSTALLATION
- Install in accordance with all electrical codes and standards.
- Turn off the power by switching the breaker or fuse off.
- If replacing a device, uninstall that device. Make sure wires are stripped back and exposing 1/2” bare copper.
- Connect the BLACK wire to the brass screws. Connect the WHITE wire to the silver screws.
Then connect the GREEN wire to the green screw on the device. - Screw the terminals on the device down until wires are secured.
- Mount the device into the junction box using the screws provided.
- Attach the wall plate.
- Restore power to the circuit by switching the breaker or fuse on.
WIRING DIAGRAM
WARNING
Maxxima extends a 1 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to wormanship and/or materials within the limited warranty period.Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsover beyond sending a free replacement product.
[email protected]
866-MAXXIMA (629-9462)
www.maxximastyle.com
125 Cabot Court Hauppauge, NY 11788



















