TF 200.0059 4Single Table Frame
Product Information
The 4Single is a multi-function table designed for various
activities. It can be adjusted to suit seated or standing positions
and is ideal for wheelchair users. The table is not intended for
use as a lifting table or person lifter. It should be used indoors
under room temperatures and humidity conditions specified in
section 3. The product has CE marking and complies with the basic
requirements for functionality and safety of the current EU
Directive. It also has UKCA marking.
The technical data of the product are as follows:
- Item numbers: 50-41110, 50-41210, 50-42xxx, 50-44xxx
- Options: Front fascias for frame, Side fascias for frame
- Material: Not specified
- Surface treatment: Not specified
- Max. load of frame: Not specified
- Temperature: Not specified
- Air humidity: Not specified
- Complaints: Not specified
- Producer: Not specified
The product comes with a schematic diagram of the frame, which
shows the connections and dimensions.
Product Usage Instructions
Before using the product, it is important to read and understand
the user manual. Here are the instructions for mounting the
table:
Assembly of Frame
- Check that the height (L) of all four legs is identical. If
necessary, adjust using the open-end wrench provided. - Place the side fascias on a flat surface and mount the legs
according to the label on the legs. - At the opposite end of the handle, fit a stop ring on either
side of the angular gear. Do not tighten the stop rings until the
frame has been fully assembled.
Note: Mounting should always be carried out by competent
personnel. Prior to mounting, ensure that all parts have been
provided by referring to the list of components in section 6 of the
user manual.
4SingleManual
User Manual Mounting Instructions Keep this folder with product at all times!
TF 200.0059_uk / 09-03-2023 / Rev 01
Contents
1. INTRODUCTION ……………………………………………………………………………………………………………………………. 3 2. APPLICATION ……………………………………………………………………………………………………………………………….. 3 3. TECHNICAL DATA………………………………………………………………………………………………………………………… 4 4. SCHEMATIC DIAGRAM OF FRAME…………………………………………………………………………………………….. 5 1. GEARBOX 96000656 2 …………………………………………………………………………………………………………………….. 6 5. MOUNTING INSTRUCTIONS, ILLUSTRATIONS …………………………………………………………………………. 6
5.1 Assembly of frame ……………………………………………………………………………………………………………………. 7 5.2 Mounting of wheels (option) ……………………………………………………………………………………………………….. 7 6. LIST OF COMPONENTS ………………………………………………………………………………………………………………… 7 7. OPTIONS ………………………………………………………………………………………………………………………………………… 8 8. SAFETY IN USE ……………………………………………………………………………………………………………………………… 9 9. CLEANING/ MAINTENANCE ………………………………………………………………………………………………………… 9 9.1 Cleaning of frame…………………………………………………………………………………………………………………….. 9 9.2 Maintenance……………………………………………………………………………………………………………………………. 9 9.3 Service schedule, operation and maintenance ……………………………………………………………………………. 10 10. COMPLAINTS ………………………………………………………………………………………………………………………………. 11
TF 200.0059_uk
Page 2
1. Introduction
4Single is a multi-function table, which may be adjusted to suit seated or standing activities. Owing to the unique design there are a variety of applications and the table is therefore also ideal for wheelchair users.
This document must ALWAYS accompany the product and be read by and available to users.
All users must follow these instructions. It is very important that the instructions have been read and understood prior to operation of the product. These instructions must always be available to the user and must accompany the product in case of relocation. Correct use, operation and inspection are decisive factors for efficient and safe performance.
The operation must be made or supervised by an experienced adult, who has read and understood the importance of section 8 “Safety in use”
2. Application
4Single is designed to obtain optimum working height for the user. It is an activity table and not for use as a lifting table or person lifter. The product must be used indoor, under room temperatures and humidity as stated in section 3. 4Single is not designed for use in damp rooms.
3. Conformity with EU Directive and UK Directive
This product has CE marking and is thus in accordance with the basic requirements concerning functionality and safety of the current EU Directive. See separate CE declaration. This product has UKCA marking. See separate Declaration of Conformity
TF 200.0059_uk
Page 3
3. Technical data
Product: Item numbers:
4SingleManual
Set of legs, manual Height 55-85cm / 21,6 33,4in H1 Height 65-95cm / 25,6 37,4 in H2
Front fascias for frame L = xxx cm From 60-300cm in increments of 1cm From 23,6-118,1in in increments of 0,4in
Side fascias for frame W = xxx cm From 60-200cm in increments of 1cm From 23,6-78,7in in increments of 0,4in
50-41110 50-41210 50-42xxx
50-44xxx
Options: Material: Surface treatment:
Max. load of frame: Temperature: Air humidity: Complaints: Producer:
Wheels: Increase the table height by 6.5cm / 2.5in Welded steel tubes St. 37 and various plastic components Blue chromate, powder coating: Standard CWS 81283 RAL 7021 mat 150kg / 330lb evenly distributed 5-45° C 5-85% (non-condensing) See page 12 Ropox A/S, DK-4700 Naestved, Tel.: +45 55 75 05 00 E-mail: [email protected] – www.ropox.com
TF 200.0059_uk
Page 4
Width 60 – 200cm / 23.6 – 78.7in (Width of frame always 0.4cm/0,2in less than the table top, i.e. 59.6
199.6cm / 23.4 78.5in) )
4. Schematic diagram of frame
All connections to the table must be flexible to ensure that the table moves freely within the range of adjustment.
WWiiddtthh 1188ccmm/7in
LLeenngghtth99cmcm/ 3,5in or
20cm
20cm
For table top length 60 – 300cm / 23.6 – 118.1in (Length of frame always 0.4cm/0,2 less than the table top,
i.e. 59.6 299.6cm / 23.4 – 117.9in)
Height: 55-85cm (H1) 21,6-33,4in
Height:65-95cm (H2) 25,6 37,4in
Height w/wheels: + 6.5cm / 2,5in
Size of frame without middle support: Length 60-300cm / 23,6 118,1in Width 60-120cm / 23,6 47,2in
6cm/2,4in
Size of frame with middle support: Length 60-300cm / 23,6 118,1in Width 121-200cm / 47,6 78,7in
6cm/2,4in
TF 200.0059_uk
Page 5
6
11
2
10
3
1
5
4
13
9
7
14
12
8
Component 1. Gearbox 2. Shaft adapter, outside Hex7, inside Hex6 3. Side fascia shaft, Hex6. Length = frame width 13.8cm/5,4in 4. Gearbox for crank handle, Fixture & Bushing 5. Front fascia shaft, Hex7. Length = frame length 16.7cm/6,5in 6. Leg 1 7. Leg 2
8. Handle 9. Allen screw M8x16 10. Side fascia profile, Length = frame width 12.4cm/4,9in 11. Front fascia profile, Length = frame length 12.4cm/4,9in 12. Stop ring incl. screw
13. Screw ø4.8×13, Torx 14. Cover plate
Item No. 96000656 30*12999-047
30*12999-148
20*60320-297 95010003
98000-555 95091012 50*40000-025
Leg 1
Leg 2
Pcs. 2 4 2 1 1 2 2 1
16 2 2 2 2 4
Green
Black
Black
Green
Black Blue
Black
Red
Black Blue
Green Black
Leg 2
TF 200.0059_uk
Black
Green
Leg 1 1
Page 6
5. Mounting instructions, illustrations
Mounting must always be carried out by competent personnel.
Prior to mounting, check that all parts have been provided. See list of components, section 6. 5.1 Assembly of frame
6.1.1 Check that the height (L) of all four legs is identical. May be adjusted on hexagonal shaft by means of the open-end wrench provided. Place side fascias on a plane surface and mount legs. See label on legs.
6.1.2 At the opposite end of the handle fit a stop ring on either side of the angular gear. Do not tighten the stop rings till the frame has been assembled.
6.1.3 Now mount the two front fascias. Tighten the bolts securely by means of the wrench provided.
6.1.4 Place the frame on the table top and push the cover plates between legs and table top. Centre the frame in relation to the table top.
5.2 Mounting of wheels (option)
6.1.5 Fix the table top with screws through the holes of the fascias.
TF 200.0059_uk
6.2.1 Mount the wheels. Do not forget to fit three washers on each wheel.
Page 7
6. List of components
Set of legs H1, 50-41110:
Set of legs H2, 50-41210: Front fascias for L=xxx cm, 50-42xxx: Shaft Hex7 (fascia length approx. 5cm/2in) Side fascias for W=xxx cm, 50-44xxx: Shaft Hex6 (fascia width + ca.2.5cm/1in) Handle for 4Single 50-47010-9: Gearbox 96000656: Shaft adapter 30*12999-047: Gearbox for handle 30*12999-148: The Gearbox contains: Gearbox 96000688 Fixture for shaft extension 30*12999-051 Bushing 30*12999-052
Allen screw M8x16 95010003: Screw ø4.8×13 95091012: Stop ring incl. screw 30*65500-084:
7. Options
Brake wheels, black (4 wheels) 50-41600: Increase the table height by 6.5 cm2,5in incl. 12 washers (95170510)
TF 200.0059_uk
1 set
1 set 1 sets 1 pc. 1 set 1 pc. 1 pc. 2 pcs. 4 pcs. 1 pc.
1 pc. 1 pc. 1 pc.
16 pcs. 2 pcs. 2 pcs.
1 set
Page 8
8. Safety in use
4Single must only be used by persons, who have read and understood these instructions.
4Single is an activity table and should not be used as a lifting table or person lifter, Always use the table in a manner excluding the risk of damage to persons or property.
The person operating the table is responsible for avoiding damage or injury. Children or persons with reduced observation capability should only operate the table
when supervised. If the table is used in publicly accessible locations where children or persons with
reduced observation capability may get near the table, the person operating the table must pay attention to those present in order to prevent dangerous situations. Make sure that there is free space above and below the table to allow height adjustment. Do not operate the table in case of defects or damage. Do not overload the table and make sure that the load distribution is correct. Do not use the table in an explosive environment. In connection with inspections, service or repairs always remove weight from the table. Modifications, which may influence the operation or construction of the table, are not allowed. Installation, service and repairs must be carried out by competent personnel. If the table has not been assembled according to these mounting instructions the right to complain may become void. Only use Ropox original spare parts as replacement parts. If other spare parts are used, the right to complain may become void.
9. Cleaning/ maintenance
9.1 Cleaning of frame
Clean the frame with a wrung cloth with lukewarm water and a mild detergent. Do not use enchants or abrasives or grinding cloths, brushes or sponges.
Dry the frame after cleaning.
9.2 Maintenance
Inspections, service and repairs must be carried out by competent personnel.
The frame is maintenance-free and the moving parts have been lubricated for life. For reasons of safety and reliability we recommend inspection of the frame once a year:
Check that all bolts have been securely tightened. Check that the table moves freely from bottom to top position.
After each inspection, fill in the service schedule.
Only use Ropox original spare parts for replacement of parts. If other spare parts are used, the right to complain may become void.
TF 200.0059_uk
Page 9
9.3 Service schedule, operation and maintenance
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
Service and maintenance Serial No. Date: Signature: Remarks:
TF 200.0059_uk
Page 10
10. Complaints
See General Terms of Sale and Delivery on www.ropox.com
TF 200.0059_uk
ROPOX A/S
Ringstedgade 221 DK 4700 Naestved Tel.: +45 55 75 05 00 Fax.: +45 55 75 05 50 E-mail: [email protected]
www.ropox.com
Page 11
Ropox - World's leading disability friendly solutions
