F66-WD New York 65 Inch Wood Grain and Black Metal Floor Lamp
Product Information
The product is a lamp kit that includes the following parts:
- Lamp socket (A) x 1
- Tube (C) x 3
- MDF (B/D/F) x 3
- Saddle (H) x 1
- Harp (I) x 1
- Shade (J) x 1
- Finial (K) x 1
- Balance kits for inclination adjustment
Product Usage Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while
assembling to prevent the cord from becoming twisted. - Tighten the lamp socket (A) into the MDF (B) until tight.
- Tighten the tube (C) into the MDF (B) until tight.
- Place the MDF (D) into the tube (C), then tighten the tube (E)
into the tube (C) until tight. - Place the MDF (F) into the tube (E), then tighten the tubes (G)
into the tube (E) until tight. - Place the harp (I) onto the saddle (H) of the lamp socket.
- Place the shade (J) onto the harp (I), then tighten the finial
(K) into the harp (I) until tight. - If the lamp body seems to be slanted after finished assembly,
use the attached balance kits to adjust the inclination.
F66
A
Lamp socket
1
C
Tube
3
B/D/F MDF
3
1.Unpack all parts from cartons carefully.
2.Carefully pull-out excess power cord from the lamp
E
Tube
3
base while assembling to prevent the cord from
becoming twisted.
G
Tube
3
3.Tighten the lamp socket(A) into the MDF(B) until tight.
4.Tighten the tube(C) into the MDF(B) until tight.
H
Saddle
1
5.Place the MDF(D) into the tube(C),then tighten the
tube(E) into the tube(C) until tight. 6.Place the MDF(F) into the tube(E),then tighten the
I
Harp
1
tubes(G) into the tube(E) until tight.
7.Place the harp(I) onto the saddle(H) of lamp socket.
J
Shade
1
8.Place the shade(J)onto the harp(I),then tighten the
finial(K) into the harp(I)until tight.
K
Finial
1
9.Please use the attached balance kits to oinclination
adjustment if the lamp body seemed to be slant after
finished assemble.
