Wet sounds Stealth 6 Amplified Soundbar with Remote
Specification
- BRAND: Wet sounds
- SPEAKER TYPE: Soundbar
- CONNECTIVITY TECHNOLOGY: Bluetooth
- MOUNTING TYPE: Plug Mount, Bar Mount
- UNIT COUNT:0 Count
- FREQUENCY RESPONSE: 40 hz-20kHZ
- WATERPROOF RATING: IP67
- PRODUCT DIMENSIONS:2 x 7.7 x 6.6 inches
- ITEM WEIGHT: 15 pounds
Introduction
The patent-pending design, which resembles our Rogue 4 led light bars, is constructed with a fully extruded aluminum housing. For dynamic output and performance, all STEALTH models include a full range speaker array in addition to extra titanium dome tweeters. With the ALL-NEW RF Wireless Remote, the steering wheel cradle may now be fully controlled. The STEALTH ULTRA HD Soundbar Series is powered by a full range class D amplifier with built-in Bluetooth, auxiliary inputs, a 2 volt line driver output to connect to another sound bar or to add external amplifier and speakers, waterproof connector, universal L mount brackets for end cap mounting or sliding top mount channel system, auto turn off feature to preserve battery life, back lit led illuminated control panel, and more.
The STEALTH-10 ULTRA HD Soundbar features two 1 inch titanium tweeters and eight full range 3 inch drivers in a 10-speaker, 300 watt system. The STEALTH-6 ULTRA HD Soundbar features two 1 inch titanium tweeters and four full range drivers in a 6-speaker, 180 watt system. True High-Performance plug-and-play stealth audio system is the STEALTH ULTRA HD Soundbar Series! A NEW RF wireless remote that can operate everything from the steering wheel cradle D-Bass Tech in a modern DSP amplifier for better low end bass response HD New composite high rigidity frames with high output drivers At any volume, there is clear sound and a rich bass. Source Control Built-In Bluetooth Connectivity Full Wiring Harness L brackets and top mount brackets are included, and there is a powder coat finish for added durability.
HOW TO INSTALL
It’s simple to pair a device with Bluetooth; just hold the source button on the device until the source indicator light starts to flash blue. Then, simply switch on your Bluetooth device, search for WS- Stealth, and pick it.
HOW TO CONNECT
SoundBar ULTRA HD is straightforward and easy to use! Connect the remote after connecting the power and ground. Use the STEALTH SUB male 3.5 jack and the blue wire. directly into the SoundBar’s LINE OUT!
HOW TO CONNECT TO TV
- Get an HDMI cord ready.
- Connect the wire to the HDMI IN port on the TV (ARC).
- Connect to the soundbar’s HDMI OUT (TV-ARC) port.
- Set the Source to D.IN and turn on the soundbar.
- Your soundbar will be used to play the TV sound.
FAQs
25, 25, 7, 25, and 6, 75 inches
Check to see if the speaker is connected to the Bluetooth device. Reconnect the speaker and Bluetooth device. The speaker or BLUETOOTH device volume could be too low. Set a reasonable volume for the music.
The Wet Sounds Stealth Ultra Series Sound Bars are the first all-purpose, high-performance audio system available for your SxS or ATV. The waterproof, patent-pending design has a casing made entirely of extruded aluminum.
Yes, it is pre-wired and has connectors for a direct battery connection.
I mailed mine back; a JBL boombox would be a better choice. For my golf cart, it was. They have rechargeable batteries and are compatible with other JBL speakers.
Standard L brackets will be included with this. Mounting brackets come in two different varieties and are optional. Happy to assist!
Can a soundbar be used without a TV, though? You can use a soundbar without a TV as long as it has more input options than just HDMI.
The sound quality is optimum when using an HDMI cable. The majority of TVs and soundbars feature HDMI ports. Remember that an HDMI ARC or eARC cable and port are required. You’ll need an optical cable in addition to an HDMI cable if you don’t have this.
A new HDMI cable is not necessary when using HDMI ARC. Any HDMI cable should be capable of meeting the demands.
Disconnect the cords, then rejoin them when the TV and audio components (Soundbar, Home Theater System) are off. Make sure the cords are firmly linked between the TV and the audio equipment.
Both cables are reasonably priced. The greatest distinction is that HDMI can transmit audio at higher resolutions, including Dolby TrueHD and DTS HD Master Audio, which are audio formats available on Blu-ray discs.
Audio Return Channel is referred to as ARC. Most HDMI 2.0b cables and some HDMI connectors employ this technology. With ARC, you may broadcast audio from a TV back to the source, such as a receiver or soundbar, but a conventional HDMI link can only carry video images.
If the speaker gets wet, first drain the water from it, and then use a soft, dry towel to remove the moisture. Leaving moisture on its surface could cause the speaker to freeze and malfunction, especially in colder climates. After utilizing the speaker, make sure to wipe off any remaining moisture.
There are still many soundbars available with legacy audio inputs that will function with older TVs, including CRT (also known as “tube”) TVs that are many years old, despite the fact that the majority of newer soundbars require an HDMI connection to connect to HDTVs and 4K TVs.
You can usually turn off or silence the built-in speakers on most contemporary TVs. To send signals directly to the soundbar itself, you then change your TV’s audio setup menu’s sound output to “External.”
