Vevor Dgbmd8-8l110vttm3v1 450 W Dual Rotating Dough Kneading Machine Food Processors Instruction Manual

Vevor Dgbmd8-8l110vttm3v1 450 W Dual Rotating Dough Kneading Machine Food Processors Instruction Manual

VEVOR logoDGBMD8-8L110VTTM3V1 450 W Dual Rotating Dough Kneading Machine Food Processors
Instruction Manual

BMD8 SERIES SPIRAL MIXERS

BMD8 series spiral mixers are a new type of kneader. Both the dough arm and bowl are running so that it can raise the mixing speed and efficiency greatly. The machines are equipped with protective covers, are easily operable, and safety. They are good-looking and easy clean, suitable for mixing flour in hotels, restaurants, and public canteens.

Technical specifications

ModelVoltageFrequencyPowerIP RatingBowl volumeMax capacityDimension mm
BMD8—110V60Hz0.45kWIPX18L3kg495x302x385

VEVOR DGBMD8-8L110VTTM3V1 450 W Dual Rotating Dough Kneading Machine Food Processors - 1

Operation and Notes

  1. Set it on a dry horizontal plane (or support), and take it firmly.
  2. Before use, ensure that the power supply corresponds to that required by the machine and the external ground wire is reliably connected.
  3. Ensure that flour mixing capacity is lower than the max. flour capacity.
  4. Before starting, ensure that a safe protection cover has been put down.
  5. Do not put your hands and hard things into the bowl in running.
  6. Do not hold and drag the belts and chains by hand.

Maintenance

  1. Continuous run time is not too long, keep the machine used long.
  2. After use, clean the machine, as to avoid bacteria growth.
  3. The transmission case is packed with special grease that will last for service for six months. To add or replace grease, it is necessary to remove the upper cover.

Note: Before maintenance, the machine must be cut off from the power supply.

Troubleshooting:

TroubleProbable causeRemedy
The mixing shaft does not rotate after switching onElectric connectors are looseCheck the electric circuit tighten those
loose connectors
Square rod trembleLock bolts are looseTighten those bolts
The temperature rise of the motor is too
high, below the speed
Lack of voltageCheck the supply voltage
OverloadLess load
The noise of the transmission case is seriousLubrication is insufficientAdd or replace the grease
Chains are looseTighten the chains
The agitator knocks with the bowlThe agitator of the bowl is deformedRepair or replace deformed part

Warning: It cannot be cleaned by water directly.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals