FDBT-OR2-BULL Wireless Bluetooth Speaker
Product Information
The FDBT-OR2-BULL is a Bluetooth 5.0 speaker that has a
frequency range of 20Hz-20kHz. It has a charging time of 150
minutes and can play music for 60-90 minutes on a single charge.
The device is made of ABS material.
Device Description
- On/off switch with DC 5V
- LED indicators
- Charging port
WARNING: A qualified charger from a reliable
source must be selected. The device must be fully charged for 3-4
hours before first use. The LED indicator will light up during
charging and turn off when the speaker is fully charged.
Product Usage Instructions
- Before first use, fully charge the device for 3-4 hours by
connecting the cable to a computer’s USB port, using an AC adapter
(not included), or other DC power supply not exceeding 5V, 1A. - To turn on the device, flip the on/off switch to the “on”
position. - Activate Bluetooth on your smartphone or other
Bluetooth-enabled device. - Select “FDBT-OR2-BULL” from the list of available devices.
- The LED indicators will flash to indicate that the device is
connected. - Play music or other audio on your device and it will play
through the speaker. - To turn off the device, flip the on/off switch to the “off”
position.
Cleaning and Storage Instructions
- Turn off the device before cleaning.
- Use a soft damp cloth for cleaning.
- Do not use corrosive cleaners or abrasives (such as steel wool
or brushes) for cleaning.
Note: Changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Consult the dealer or an
experienced radio/TV technician for help if needed.
Instruction Manual
Model: FDBT-OR2-BULL
Specification:
Bluetooth 5.0 Frequency range: 20Hz-20kHz Charging time: 150 min Music playing time: 60-90 min Material: ABS
Device description
1. On/off Switch
DC 5V
2. LED indicators
3. Charging port
Power on and connect Press and hold the on/off button on the device to turn the speaker on or off. Enable Bluetooth® function on mobile device, and search for Bluetooth® devices. The device name is “FDBT-OR2-BULL”. When the pairing is successful, a beep will sound. If you want to switch pairing to other mobile devices, then you need to cut off the connection of existing equipment and repeat the steps with the new device.
WARNING: You must select a qualified charger from a reliable
source. You must charge the Bluetooth® speaker if it has
not been used for more than 12 months.
Please fully charge the device for 3-4 hours before first use. Connect the cable to the computer’s USB port, use an AC adapter (not included) or other DC power supply not exceeding 5V, 1A. The LED indicator will light up and the LED indicator will turn off when the speaker is fully charged.
Cleaning and storage 1. Turn off the device before cleaning. 2. Use a soft damp cloth for cleaning. 3. Do not use corrosive cleaners or abrasives (such as steel wool or brushes) for cleaning.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
