LineaPro 12 mini High Quality Barcode Reader
Product Information: – Product Name: LineaPro 12
mini – 13 mini – Manufacturer: DATECS LTD – Address: 4 Datecs
Street, Sofia 1592, Bulgaria – Phone: +359 2 816 55 50 – Fax: +359
2 816 55 65 – Email: [email protected] – Regulatory Compliance: FCC
ID: YRW-LINEAPRO12IM Technical Specifications: –
Microcontroller Keyboard and Buttons – Contactless Card Reader
(optional) – 2D Barcode Reader – Supported 1D and 2D Symbology –
Connectivity Device Compatibility – Audio Features – Power Supply –
Battery Product Usage Instructions: 1. Getting
Started: – Follow the instructions in the updated section “GETTING
STARTED” of the user manual (refer to version 1.1.0). – This
section will guide you on how to set up and initialize the LineaPro
12 mini – 13 mini. 2. Attaching Apple Device to LineaPro 12 mini –
13 mini: – Refer to the section “ATTACHING APPLE DEVICE TO LINEAPRO
12 MINI – 13 MINI” (refer to version 1.2.0) for detailed
instructions on how to connect your Apple device with the LineaPro
12 mini – 13 mini. 3. Replacing Battery of LineaPro 12 mini – 13
mini: – To replace the battery of your LineaPro 12 mini – 13 mini,
follow the instructions provided in the section “REPLACING BATTERY
OF LINEAPRO 12 MINI – 13 MINI” (refer to version 1.2.0). 4.
Operation Modes: – The LineaPro 12 mini – 13 mini supports
different operation modes. Refer to the section “OPERATION MODES”
for detailed information on how to switch between different modes
and utilize the features of the device. 5. Care, Maintenance, and
Warranty: – To ensure the proper care, maintenance, and warranty
coverage of your LineaPro 12 mini – 13 mini, follow the guidelines
provided in the section “CARE, MAINTENANCE AND WARRANTY”. Please
note that any changes or modifications to the device not explicitly
approved by the manufacturer may void your authority to operate the
equipment. For regulatory compliance and RF exposure information,
refer to the section “REGULATORY” in the user manual (refer to
version 1.2.0).
1 DATECS
LineaPro 12 mini – 13 mini User Manual
1 DATECS
LEGAL NOTICE
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD.
Address: 4 Datecs Street, Sofia 1592, Bulgaria Phone: +359 2 816 55 50 Fax: +359 2 816 55 65 E-mail: [email protected]
UM 07.01.63/v1.2.0
2
1 DATECS
REVISION HISTORY
LINEAPRO 12 MINI – 13 MINI
Version Data
Change description
1.0.0 22.06.2023 First Release
1.1.0 28.06.2023 Updated section “GETTING STARTED”
1.2.0 18.07.2023 Updated section “REGULATORY”
USER MANUAL
UM 07.01.63/v1.2.0
3
1 DATECS
CONTENTS
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
REGULATORY……………………………………………………………………………………………………………………………………………………… 5
TECHNICAL SPECIFICATIONS ………………………………………………………………………………………………………………………………… 6
GENERAL VIEW …………………………………………………………………………………………………………………………………………………… 8
GETTING STARTED………………………………………………………………………………………………………………………………………………. 9
ATTACHING APPLE DEVICE TO LINEAPRO 12 MINI – 13 MINI …………………………………………………………………………………. 10
REPLACING BATTERY OF LINEAPRO 12 MINI – 13 MINI………………………………………………………………………………………….. 11
OPERATION MODES ………………………………………………………………………………………………………………………………………….. 12
SCANNING BARCODES …………………………………………………………………………………………………………………………………………. 12 CONTACTLESS CARDS READING……………………………………………………………………………………………………………………………….. 13 TURN OFF DEVICE FUNCTION …………………………………………………………………………………………………………………………………. 14 CHARGING APPLE DEVICE……………………………………………………………………………………………………………………………………… 14 UPDATING FIRMWARE ………………………………………………………………………………………………………………………………………… 14
CARE, MAINTENANCE AND WARRANTY………………………………………………………………………………………………………………. 15
UM 07.01.63/v1.2.0
4
1 DATECS
REGULATORY
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
FCC ID: YRW-LINEAPRO12IM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information and Statement
This transmitter must not be in co-location or operating in conjunction with any other antenna or transmitter. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
UM 07.01.63/v1.2.0
5
1 DATECS
LINEAPRO 12 MINI – 13 MINI
TECHNICAL SPECIFICATIONS
USER MANUAL
Microcontroller Keyboard and Buttons
Contactless Card Reader (optional)
2D Barcode Reader
Supported 1D and 2D Symbology*
Connectivity Device Compatibility
Audio Features Power Supply Battery
Dimension W x H x D, mm Weight, g
Operational temperature range Storage temperature range
ARM Cortex® M4 Microcontroller Two Scan buttons Supports: ISO/IEC 14443 Type-A/MIFARE – MIFARE MINI – MIFARE CLASSIC-1K, MIFARE CLASSIC-4K – MIFARE ULTRALIGHT, ULTRALIGHT-C – MIFARE PLUS 2K/4K – MIFARE DESFire – and other ISO/IEC 14443 Type-B – supports most of the cards ISO/IEC 15693 – supports most of the cards JIS X 6319-4 – compatible with FeliCa ISO/IEC 18000-3 mode 3 – NFC 2D Opticon MDI-4000* CMOS Imager 640 x 480 pixels (optional) 2D Zebra SE4750 SR/MR CMOS Imager 1280 x 960 pixels (optional) 2D Zebra SE4770 CMOS Imager 1280 x 800 pixels (optional) 2D Zebra SE5500 CMOS imager 2688 x 1520 pixels (optional) BARCODE 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/Plessey, S-Code, Telepen, Tri-Optic, UK/ Plessey POSTAL CODE: Chinese Post, Intelligent Mail Barcode, Korean Postal Authority code, POSTNET 2D CODE: Aztec Code, Aztec Runes, Chinese Sensible code, Codablock F, Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B), Maxi Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code Apple 9 pin connector (lightning connector) External trigger of barcode scanner via rear side connector Pass-through sync through USB type-C connector SAM holder Serial communication pass-through USB type-C connector Serial communication pass-through the Dock connector Apple iPhone 12 mini, iPhone 13 mini Electro-Magnetic Buzzer DC 5V through USB type-C DC 5V through Dock connector Rechargeable Li-Ion Battery 3.6V / 2330mAh 76.5 x 155.4 x 28 164 -10 °C to +40 °C / 5 to 90% RH -20 °C to +50 °C / 5 to 90% RH
* Specification can be changed without any notice.
UM 07.01.63/v1.2.0
6
1 DATECS
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
Use only original equipped DATECS cable USB-A to USB-C (Z05C000000-05) or approved USB-C to USB-C cable for charging Apple device.
Use only approved USB adapters. The minimum requirements of USB adapter are 5V/1A. Recommended is 5V/2.1A.
Waste Electrical & Electronic Equipment
The symbol means that according to local laws and regulations your product shall be disposed of separately from household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
UM 07.01.63/v1.2.0
7
1 DATECS
GENERAL VIEW
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
1. Back Cover 2. Volume buttons of Apple device 3. Scan Buttons 4. USB type-C connector 5. Apple 9 pin connector 6. Dock connector
7. Battery cover latch 8. Battery cover/RFID reader for HF 9. Locking screw for back cover 10. On/Off button of Apple device 11. Barcode engine
UM 07.01.63/v1.2.0
8
1 DATECS
GETTING STARTED
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
LineaPro 12 mini – 13 mini has rechargeable Li-ion battery. Can be charge from USB port or External features connector. Power source can be variable from USB wall adapters or Datecs power stations.
Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 4 hours and 30min (for more details please refer to the table below).
LineaPro 12 mini – 13 mini battery always start to charge when external power was provided. Charging stops when battery is fully charged. Charging power can be “LOW” and “HIGH” and depends on Apple device connection state. (valid for firmware version 01.05.68.64)
External Power supply*
Apple device connected
500mA
LOW
1000mA
LOW
>1000mA
HIGH
*Maximum current which can provide the power supply
LOW 350mA
HIGH 580mA
Apple device disconnected LOW HIGH HIGH
Charging from USB adapter:
UM 07.01.63/v1.2.0
9
1 DATECS
LINEAPRO 12 MINI – 13 MINI
ATTACHING APPLE DEVICE TO LINEAPRO 12 MINI – 13 MINI
USER MANUAL
First needs to be removed back cover. Then must slide down Apple device to LineaPro 12 mini – 13 mini lightning connector. Slide Apple device until completely fit to LineaPro 12 mini – 13 mini. Place back cover to LineaPro 12 mini – 13 mini.
Before removal back cover, locking screw of back cover must be unscrewing.
UM 07.01.63/v1.2.0
10
1 DATECS
LINEAPRO 12 MINI – 13 MINI
REPLACING BATTERY OF LINEAPRO 12 MINI – 13 MINI
USER MANUAL
The rechargeable battery of LineaPro can be replaced. Put the battery cover latch (1) to unlock position, by pushing it forward. Then pull up the battery cover (2). Remove old battery with lifting, from the bottom side (3). First insert the side with contacting pads (4) of the battery then press it down. Direction of battery cover closing. Place the clips to correct position. When the battery cover is completely closed, put back cover latch to lock position.
2
1
3 4
Replace battery only with new original battery with part number PL-15-110.
UM 07.01.63/v1.2.0
11
1 DATECS
OPERATION MODES
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
For start operating with LineaPro 12 mini – 13 mini needs to be attached Apple device and installed application for iOS. For downloading the latest SDK please contact with your distributor.
For turn On LineaPro 12 mini – 13 mini press one of the scan buttons and unlock Apple device screen.
Scanning barcodes
LineaPro 12 mini – 13 mini can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing and holding the scan button). Then position the scanning engine to the center of the barcode by aiming and the illumination box is over the outer edges of the barcode, as shown on the picture below. Slowly pull back or forward the unit, while increasing or decrease the distance between the barcode and the scanning head, until the barcode has been read by the scanner. Barcode data will have shown on the use application for iOS.
LineaPro 12 mini – 13 mini support different types of scanning modes: – Single Scan – Multi Scan – Motion Detect – Multi Scan without duplicates
UM 07.01.63/v1.2.0
12
1 DATECS
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
Contactless cards reading.
The LineaPro 12 mini – 13 mini has RFID HF contactless cards reader. The antenna (1) of the reader is located on LineaPro 12 mini – 13 mini back side. Contactless card/tag must be placed on shown position (1). For list of supported standards, please refer to sections “TECHNICAL SPECIFICATIONS”.
UM 07.01.63/v1.2.0
13
1 DATECS
LINEAPRO 12 MINI – 13 MINI
USER MANUAL
Turn off device function
When is pressed this turn off, LineaPro 12 mini – 13 mini is going to sleep mode immediately.
Charging Apple device
LineaPro 12 mini – 13 mini can charge Apple device, when power source (USB adapter) is attached to USB connector or LineaPro 12 mini – 13 mini is placed on Datecs charging station. Charging Apple device can be at LOW and HIGH power and depends on the battery charging state and power source.
External Power supply*
When Linea battery is
charging, can be provided
current to Apple device:
500mA
NONE
1000mA
LOW
1500mA
LOW
>1500mA
HIGH
*Maximum current which can provide the power supply
NONE 0A LOW 500mA
HIGH 1000mA
When Linea battery is charged, can be provided current to Apple device:
LOW HIGH HIGH HIGH
LineaPro 12 mini – 13 mini can charge Apple device from his own battery. Only needs to be activated function “Automated Charge”, to be start charging battery level of LineaPro 12 mini – 13 mini must be above 20%. Charging will stop when Linea battery is below 10%. Charging current to Apple device is 500mA.
Updating Firmware
Firmware of LineaPro 12 mini – 13 mini can be updated with newer version. Press “Update Firmware” from application, first will be shown current firmware version and to which version can be updated, then press update.
Firmware of LineaPro 12 mini – 13 mini barcode engine can be updated with newer version. Press “Update Barcode Engine Firmware” from application. First will be shown current firmware version and to which version can be updated, then press update.
UM 07.01.63/v1.2.0
14
1 DATECS
LINEAPRO 12 MINI – 13 MINI
CARE, MAINTENANCE AND WARRANTY
USER MANUAL
· Keep the LineaPro 12 mini – 13 mini side of the reach of small children. · Do not drop or knock LineaPro 12 mini – 13 mini. · Don’t charge LineaPro 12 mini – 13 mini when inside of USB connector
is spilled liquid. Please first clean and dry the USB connector and then charge the device. · Keep the device and battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. · Dispose the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. · Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
· Do not open the LineaPro 12 mini – 13 mini. Only qualified personnel can open the device and make repair. If the LineaPro 12 mini – 13 mini is not working, please contact your dealer.
· Allowing unqualified personnel to service your LineaPro 12 mini – 13 mini may result in damage to your LineaPro 12 mini – 13 mini and will void your warranty.
UM 07.01.63/v1.2.0
15
