SADK S8-4B Development Kit
Product Information:
The product is the Senseair Development Kit S8-4B, also known as
SADK S8-4B. It is an installation manual for this kit.
The kit includes:
- 1 x SADK S8-4B
- 9 x unknown items (not specified in the manual)
- 5 x unknown items (not specified in the manual)
Note: This product is ESD-sensitive, meaning it is susceptible
to damage from electrostatic discharge. To protect the product, it
is recommended to use ESD protection equipment during handling and
installation.
If you require further assistance or have any questions, please
contact your local representative.
IMA13905 Rev 1
Product Usage Instructions:
- Choose the appropriate connector for your needs:
- A) Without connector
- B) Connector with 3 pins
- C) Connector with 5 pins
numbered sequence:
- Connector C (if applicable)
- Connector B (if applicable)
- Connector A (if applicable)
Driver from the official Senseair website at https://senseair.com/download.
installation instructions provided to set up the SADK S8-4B.
If you encounter any issues or need further assistance, please
refer to the product manual or contact Senseair AB at the following
address:
Senseair AB (headquarter)
Stationsgatan 12, Box 96
824 08 Delsbo, Sweden
Installation manual
SADK S8-4B
Senseair Development Kit S8-4B
x1 x9
x5
NOTE: ESD-sensitive product. Use ESD protection equipment.
?
!
Local
representative
IMA13905 Rev 1
1
2
A) without connector
B) connector with 3 pins
C) connector with 5 pins
C B A
3
2
1
4
UIP software (version 5 or higher) and
USB Cable Driver
are downloadable at https://senseair.com/download
Senseair AB (headquarter) Stationsgatan 12, Box 96, 824 08 Delsbo, Sweden
Phone: +46-(0)653 71 77 70 www.senseair.com
©2023 Senseair AB. All rights reserved.
Air quality & Gas sensing technology from Senseair
Software | Senseair
