B0BYBBGPFY Fixed Frame Projector Screen
Product Information
This product is a projector screen that comes with all the
necessary parts for installation. The package includes:
- Long Frame x2
- Short Frame x2
- Long Fiberglass Rod x2
- Short Fiberglass Rod x2
- Screen x1
- Corner Plate x4
- Spring Hook x1
- Springs x44
- Hanging Bracket x2
- Corner Plate Screws x16
- Wall Anchors x6
- Wall Screws x6
Product Usage Instructions
- Place the four frames facing down onto the floor or countertop,
as shown in the image. Screw the corner plates into place using the
corner plate screws. - Before proceeding, wash your hands and avoid touching the white
side of the screen. Use a clean cloth sheet underneath. Roll out
the projector screen with the black side facing up. Slide the
fiberglass rods into the four side pockets of the screen. - Place the screen with the white side facing down on top of the
facing down frame to hook the springs. Start by placing the spring
in the middle part of the screen (3-4 on each side), pulling them
toward the frame. - Continue to hook the corner springs toward the frame, then
complete hooking the remaining springs until the screen is
completely stretched out. - Measure the area where the projector screen is going to be
hung. Install the brackets at least 50 inches apart and make sure
they are aligned. Use a power drill to make the holes. Insert the
anchors, then place the brackets and screws into place. - Hang your projector screen and enjoy!
Directions: To ensure the performance of your screen, please note the following points:
1. When installing the screen, find a floor or counter top of the correct size. It’s best to cover it with a clean cloth sheet or another soft material so the screen does not get damaged. 2. Do not write or mark the screen or the frame. 3. Do not use sharp or hard objects on the screen to avoid scratches or damage. 4. Avoid touching the white part of the screen with your hands. 5. Do not use a corrosive detergent to clean the screen. For cleaning use a soft clean cloth to remove dust. 6. During installation, please take it lightly and keep children away.
Parts Included:
Long Frame x2
Short Frame x2 Long Fiberglass Rod x2 Short Fiberglass Rod x2
Screen x1
Corner Plate x4
Spring Hook x1
Springs x44
Hanging Bracket x2
Corner Plate Screws x16
Wall Anchors x6
Wall Screws x6
1. Place the four frames facing down onto the floor or countertop (as the image ), and screw the corner plates into place by using the corner plate screws.
2. For this step we recommend washing your hands, avoid touching the white side of the screen, and use a clean cloth sheet underneath. Roll out the projector screen with the black side facing up, and slide the fiberglass rods into the four side pockets of the screen.
3. Place the screen with the white side facing down on top of the facing down frame to hook the springs. Start by placing the spring in the middle part of the screen (3-4 on each side ), pulling them toward the frame.
4. , Continue to hook the corner springs toward the frame, then complete the remaining springs until the screen is completely stretched out.
5. Measure the area where the projector screen is going to be hung. Install the brackets at the least 50-inch apart, and make sure there are aligned. Use a power drill to make the holes. Insert the anchors then place the brackets and screws into place.
6. Hang your projector screen and Enjoy!
