Losi Los334024 No Prep Drag Car Carbon Fiber Shock Tower Extension Instruction Manual

LOS334024 No Prep Drag Car Carbon Fiber Shock Tower Extension

Product Information

The Carbon Fiber Shock Tower Extension is a component designed
to enhance the performance and durability of your vehicle’s
suspension system. It is made from high-quality carbon fiber, known
for its lightweight yet strong characteristics. The package
includes the following components:

• M3 x4 Screws
• M3x20mm x2 Screws
• M3x25mm x2 Screws
• Carbon Shock Extension x1

Product Usage Instructions

1. Ensure that your vehicle is turned off and on a stable
   surface.
2. Locate the shock tower on your vehicle’s suspension
   system.
3. Remove the existing screws holding the shock tower in place, if
   applicable.
4. Position the Carbon Fiber Shock Tower Extension onto the shock
   tower, aligning the holes.
5. Insert the M3 screws provided in the package through the holes
   on the extension and into the shock tower.
6. Tighten the screws using an appropriate screwdriver or tool
   until secure.
7. Repeat steps 4-6 for any additional holes on the shock
   tower.
8. Inspect the installed extension to ensure proper alignment and
   secure attachment.
9. If necessary, adjust the extension or re-tighten the screws for
   optimal fitment.
10. Once satisfied with the installation, test the suspension
    system to ensure proper functionality.

Please refer to your vehicle’s specific user manual for any
additional instructions or precautions related to installing
aftermarket components.

LOSI® NO PREP DRAG CAR
CARBON FIBER SHOCK TOWER EXTENSION
M3 x4 M3x20mm x2 M3x25mm x2
Carbon Shock Extension x1

LOSI® NO PREP DRAG CAR
CARBON FIBER SHOCK TOWER EXTENSION
©2022 Horizon Hobby, LLC. Losi and TLR are registered trademarks of Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners. Created 03/22 | 418020 | LOS334024