KEY SPECIFICATION
3″ Fireplug Vent Model # FP2021
| Eave Vents | Model | Size W x L | NFVA Provided | Flanges Available | Flange Definition | Weight |
| FP2021 | 3” diameter | 2 sq in | Flange Front | Flange Front | 2lbs | |
| Continuous Soffit and Custom sizes/materials AVAILABLE | ||||||
BENEFITS:
- Safety vents that are used in areas prone to wildfires, wind-driven rain, or wind-driven snow.
- Overlapping Baffle Protection (Patented)
o Air Flows through normally
o Resists the intrusion of Flames, Embers, Radiant Heat, Wind Driven Rain and Snow - Approved for use throughout California and beyond
- Anti -Clogging Overlapping Baffles plus 1/16″ mesh plate on back side of vent
- Prevents Rodent Entry
- 20 Year Warranty
- Easy to Install, Retrofit and Paint (comes with pre-drilled holes)
STANDARD MATERIALS
ASTM A653/A653M- G90 hot-dipped galvanized steel, 26GA
ASTM D9092- mill phosphatized coating for painting. IF BONDERIZED
ASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED
.025 x.025 hot dipped galvanized 23ga wire mesh
Installation:
See website: www.brandguardvents.com for installation instructions and video. Product is intended to be used only under a roof overhang inserted into 2x blocking/frieze block. It is not intended to be used on a sidewall without a protective roof overhang.
BRANDGUARD VENTS Inc.
6 Rancho Circle, Lake Forest, CA 92630
T: 949-481-5300
E: [email protected]
www.BRANDGUARDVENTS.com
