Outdoor Industries Led-slsh-12 Mini Led Strip Light User Manual

LED-SLSH-12 Mini LED Strip Light

Product Information:

The Gen Next Mini LED Strip Light is a versatile lighting
product designed to be mounted to the underside of a horizontal
surface, such as the bottom of a cabinet or shelf. It is important
to follow the provided instructions and adhere to current
electrical codes and the National Electric Code (NEC) to ensure
safe installation and usage. The product comes with a polarized
plug for added safety.

Product Usage Instructions:

1. Choose the desired location for the fixture and place it
   there.
2. Mark the position of the mounting holes according to the
   mounting hooks (A) or use the double-sided adhesive tape attached
   to the fixture (B).
3. Pre-drill holes at the marked locations and attach the included
   mounting screws to the horizontal surface. (Figure 1)
4. If mounting onto a surface other than wood, use suitable
   fasteners (not included).
5. Fasten the screws in the mounting hooks, then install the
   fixture with the mounting hooks. (Figure 2 + Figure 3)
6. Plug in the power cord connector.
7. Plug in the Adaptor. (Figure 4)
8. Ensure that the total output wattage of the connected LED strip
   lights does not exceed the maximum load capacity of the adaptor.
   The maximum quantity for each adaptor model is as follows:
   • LED-SLSH-TR-1A: Maximum quantity for Mini LED Strip Light –
     5PCS
   • LED-SLSH-TR-3A: Maximum quantity for Mini LED Strip Light –
     4PCS
9. Ensure that the plug is inserted into a polarized outlet
   correctly. If it does not fit, reverse the plug. If it still does
   not fit, contact a qualified electrician.
10. Do not use an extension cord unless the plug can be fully
    inserted.
11. Avoid running the cord behind walls, ceiling, soffits, or
    cabinets where it may be inaccessible for examination.
12. Visually examine the cords periodically and immediately replace
    them if any damage is noted.
13. Outwater Industries, Inc. assumes no liability for improper
    installation.

24 River Road Bogota, NJ 07603
1.800.631.8375 www.outwater.com
GEN NEXT: MINI LED STRIP LIGHT
MODEL NO.: LED-SLSH-12 / LED-SLSH-12-WW · LED-SLSH-16 / LED-SLSH-16-WW

CAUTION: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes and/or the current National Electric Code (NEC).
MOUNTING: This product is designed to be mounted to the underside of a horizontal surface such as the bottom of a cabinet or shelf. 1. Place the fixture in the desired location. 2. Mark the position of the mounting holes according to the mounting hooks (A) or use the double-sided adhesive tape directly which
is attached to the fixture. (B) 3. Pre-drill holes at marked locations and attach mounting screws (included) to horizontal surface. (Figure 1)
For mounting onto a surface other than wood, use suitable fasteners (not included). 4. Fasten the screws in the mounting hooks, then install the fixture with the mounting hooks. (Figure 2 + Figure 3) 5. Plug in the power cord connector. Then, plug in the Adaptor. (Figure 4) 6. Max. Linking quantity for the adaptor, please make sure the total output wattage is equal or less than the 12V 1A adaptor can load
(12W) or 12V 3A adaptor can load (36W).

ADAPTOR MODEL NO. LED-SLSH-TR-1A LED-SLSH-TR-3A

THE MAX QUANTITY FOR MINI LED STRIP LIGHT

LED-SLSH-12

LED-SLSH-16

LED-SLSH-12-WW

LED-SLSH-16-WW

5PCS

4PCS

15PCS

12PCS

IMPORTANT SAFETY INSTRUCTIONS: PLEASE SAVE! This fixture has a polarized plug (one blade is wider than the other) as a safety feature to the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter the plug.
ADDITIONAL SAFETY MEASURES: 1. Use only insulated staples or plastic ties to secure cords. 2. Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall. 3. Not intended for recessed installation in ceilings or soffits. 4. Intended surface installation inside built-in furnishings such as kitchen cabinets, china cabinets or trophy cases. 5. The National Electrical Code (NEC) does not permit cords to be concealed where damaged to insulation may go unnoticed.
To prevent fire danger, do not run cord behind walls, ceiling, soffits, or cabinets where it may be inaccessible for examination. Cords should be visually examined periodically and immediately replaced when damaged is noted.
Outwater Industries, Inc. assumes no liability for improper installation.

References

• Outwater Industries