MINI TABLE LAMP
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS:
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- This lighting fixture is intended for indoor use only.
- Always place the lighting fixtures on a solid, level surface.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of a 40W incandescent bulb
, or 9W LED bulb
, or 13W fluorescent (CFL)
bulb or a 9W self-ballasted LED bulb. (Bulbs not included) - This lighting fixture has a polarized plug (one prong is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug. Do not attempt to bypass this safety feature.
, or 9W LED bulb
, or 13W fluorescent (CFL)
bulb or a 9W self-ballasted LED bulbWARNINGS:
- To reduce the risk of fire, electrical shock, or personal injury: always turn off and unplug this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch the light bulb while the fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS:
- Unplug the lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
PRE-ASSEMBLY:
Carefully remove all parts and hardware from the carton, along with any protective plastic packaging. The lampshade may be covered with a plastic film that should be removed before use.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
* Part A (Shade Ring) may come pre-installed to
Part C (Socket). Unscrew Part A before installing
Part B (Lampshade), then reinstall Part A to secure.
PARTS INCLUDED:
(A*) Shade Ring
(B) Lampshade
(C) Socket
(D) Body
(E) ON/OFF Switch
For use with light bulbs with an E26 (medium) base.
DO NOT EXCEED THE SPECIFIED WATTAGE.
Made in China
ML0935 ML0936 rev121820EFS ME1A
