AJAX MotionCam Outdoor 9NA Wireless Outdoor Motion Detector
AJAX MotionCam Outdoor 9NA Wireless Outdoor Motion Detector
Product name: Outdoor motion detector featuring photo EN verification
MotionCam Outdoor recognizes mation at a distance of up to features protection against masking, dust, and splashes, and is immune to pets 9 ft and snaps photos when riggered. MotionCam Outdoor
| Frequency range | 905-926.5 MHz FHSS (complies with part 15 of the FCC rules) |
| RF Power Density | 0.0004 mW/cm’ (Limit 0.60 mW/cm’) |
| Radio signal range | Up to 5,500 ft (line-of-sight) |
| Motion detection distance | Adjustable, 10-49 ft when installed at 3.3 ft height |
| Power supply | 4x CR123,3V |
| Operation from battery | Up to 3 years |
| Operating temperature range | From -13′ to 140’F |
| Operating humidity | Up to 95% |
| Ingress protection | IP55 |
| Dimensions | 8.11 X 4.25 X 3.66″ |
| Weight | 16.58 oz |
Complete Set:
- MotionCam Outdoor;
- SmartBracket mounting panel;
- CR123 battery – 4 pcs. (pre-installed);
- Installation kit;
- Quick Start Guide.
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body: Use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation .
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains a license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with ISED’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator and your body: Use only the supplied antenna.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Warranty: The warranty for Ajax devices is valid for two years after the purchase date and does not apply to the supplied battery. If the device does not work correctly, you should first contact the support service-in half of the cases, technical issues can be solved remotely! The full text of the warranty is available on the website: ajax.systems/ warranty.
User Agreement: ajax.systems/end-user-agreement.
Technical support: [email protected]
Manufacturer: “AS Manufacturing” LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine. www.ajax.systems
The importer’s name, location, and contact details are indicated on the package. The manufacturing date is indicated on a round sticker at the bottom of the box.
