Lighted SMD Tree
Operation and Safety Instructions
– FOR INDOOR AND OUTDOOR USE –
Instruction Manual
PARTS:
| Part | Description | Illustration | Qty |
| A | Lower Body |  | 1 |
| B | Pole A |  | 1 |
| C | Pole B |  | 1 |
| D | Tree |  | 1 |
| E | Plastic Ties |  | 8 |
| F | Ground Stakes |  | 4 |
To Assemble
- Remove all the parts from the box carefully and lay out the components.
- Insert the thick head of the Pole A (B) into the corresponding hole on the Base (A) and tighten up screw on the Base (A).
- Insert the thin head of the Pole (A) into the rings of the first and second circles of the Tree (D).
- Insert the thin head of the Pole B (C) into the third and top circles of the Tree (D). Make sure insert the Pole B (C) into the Tree (D) below the second circle as below picture showed. Insert the thin head of the Pole A (B) into the thick head of the Pole B(C).
- Place the star of the Tree (D) on the top of the Pole B (C).Hang the rubber bands on the corresponding hooks on the Base (A).
- Secure the installing points with plastic ties and secure the base to the soft ground by fully inserting 4 stakes into the ground.
To Use
- To illuminate, plug the adapter into a standard 120-volt AC electrical outlet.
- To shut off, unplug the adapter from the outlet.
Distributed By:
Big Lots Stores, Inc.
PO Box 28523
Columbus, OH
43228-0523
