MC-4016-AIR USB-C Charging Cart
Product Information
The USB-C Charging Cart is a product designed to charge USB-C
devices. It is equipped with 16 or 32 USB-C ports and comes with
two shelves, bay dividers, and a power cable wrap bracket. The cart
is made in China and designed in the USA.
Cart Assembly Instructions
The cart comes with several components, including nut caps,
spring washers, flat washers, casters, washers, security screws,
and bay dividers. Follow these steps to assemble the cart:
- Engage the brake lock on each caster if it is not locked
already. - Using the supplied wrench, secure 2 casters to each side panel
of the cart using 1 flat washer, 1 spring washer, and 1 nut cap on
each caster. - Locate the PEM studs on the back of the top back panel piece on
each side. Install the back panel to the bottom shelf using 2
security screws and 2 washers on each side. - Remove the nut caps from the studs using the socket wrench.
Position the bracket onto the studs and then tighten the 2 nut caps
back onto the studs to secure the bracket in place. - Insert the bay dividers into the top shelf. For MC-4032-AIR
only, connect external power cable to the back of the hub. Insert
the bay dividers on the bottom shelf. For MC-4032-AIR only, connect
the short power cable from the top hub to the bottom hub.
Quick Start and Normal Operation
To use the USB-C Charging Cart:
- Plug the power cable into a standard 15A outlet. LEDs will
illuminate white to indicate the cart is connected to a power
source. - Connect your USB-C devices to the USB-C charging cables. Ensure
that devices are placed in the cart so that the charging ports are
as close as possible to the USB-C charging port on the cart. - Power off devices fully before connecting them to the cart for
charging. - Connect/disconnect devices any time. You may hear a clicking
sound, and the LED lights will change color according to the power
draw of the attached devices. - The system will automatically limit power consumption by
turning some of the USB-C ports off temporarily. Refer to the
device for the level of charge. - Connected devices will charge as fast and evenly as possible,
up to 65W, without drawing too much power. - To remove devices from the carts with the greatest level of
charge first, disconnect devices with the green LEDs first before
you disconnect devices with the blue LEDs.
For additional support, please call 866.393.4202 or email
[email protected].
Open USB-C Charging Cart
16
32
MC-40XX-AIR Assembly and User Manual
Version C
#M00016 Last Modified 04/11/2023
For a copy of the most up-to-date manual, please contact a JAR Systems representative or visit:
JAR-Systems.com/Support
Designed in the USA Made in China
Cart Assembly Instructions
Components
(A1)
(B2)
(C3)
(D4)
(E5)
(F6)
(G7)
(D4) 4 Nut Caps
(E5) 4 Spring Washers (F6) 4 Flat Washers
(H8)
(I9)
(J10)
(K11)
(T20) 4 Casters
(L12)
(M13)
(N14)
(O15)
1: Engage the brake lock on each caster (T20) if it is not locked already. Using the supplied wrench (J10), secure 2 casters (T20) to each side panel (L12), (M13) of the cart using 1 flat washer (F6), 1 spring washer (E5), and 1 nut cap (D4) on each caster.
(P16)
(Q17)
(R18)
(S19) (T20)
(P16) Top Back Panel
(A1) 8 Washers
(P16) (B2) 8 M6 Security Screws
(R18) Bracket 2 Nut Caps
(Q17)
2: To install the power cable wrap bracket, locate the 2 3: Using the T30 Torx key (I9), install the back panel of the top shelf (P16) using 2 security screws (B2) and 2 washers
PEM studs on the back of the top back panel piece
(A1) on each side. Install the back panel to the bottom shelf (Q17) using 2 security screws (B2) and 2 washers
(P16) and remove the nut caps from the studs using
(A1) on each side. Do not fully tighten the screws until after step 4.
the socket wrench (K11). Position the bracket (R18)
onto the studs and then tighten the 2 nut caps back
onto the studs to secure the bracket in place.
1
For Additional Support Call: 866.393.4202 or Email: [email protected]
(O15) 2 Shelves
(C3) 12 M5 Security Screws
(N14) USB-C Charging Hub(s)
4: Using the T25 Torx key (H8), install the two shelves in the top and bottom positions of the side panels with 2 security screws (C3) on each side. Install the USB-C hub below the top shelf using 2 security screws (C3) on each side. Tighten all screws installed in steps 3 and 4. MC-4032-AIR ONLY: Install the second USB-C hub below the first hub OR below the bottom shelf using an additional 2 security screws (C3) on each side. Installing the hub below the top shelf provides top-down cables. Installing the hub below the bottom shelf provides extra space for larger devices. Tighten all screws installed in steps 3 and 4.
(S19) Bay Dividers
5: Insert the bay dividers (S19) into the top shelf. See page 4 for bay configuration options. MC-4032-AIR ONLY: 6: Connect external power cable to the back of the hub.
Insert the bay dividers on the bottom shelf.
MC-4032-AIR ONLY: Connect the short power cable
from the top hub to the bottom hub.
2
For Additional Support Call: 866.393.4202 or Email: [email protected]
Quick Start
Normal Operation
1. Connect cart to power source
·
2. Plug in powered down devices ·
3. Connected devices will automatically charge as efficiently as possible ·
4. Connect/disconnect devices any time
LED Charging Port Indicator Lights
White: Port Ready
·
Blue: Device Charging
Green: Charge Level >90% ·
· ·
Plug the power cable into a standard 15A outlet. LEDs will illuminate white to indicate the cart is connected to a power source.
Power off devices fully before connecting them to the cart for charging.
Connect the devices to the USB-C charging cables. Ensure that devices are placed in the cart so that the charging ports are as close as possible to the USB-C charging port on the cart. Incorrectly connecting devices can strain the cable over long periods of time and lead to damage.
You may hear a clicking sound, and the LED lights will change color according to the power draw of the attached devices.
The system will automatically limit power consumption by turning some of the USB-C ports off temporarily. Refer to the device for the level of charge. Connected devices will charge as fast and evenly as possible, up to 65W, without drawing too much power.
To remove devices from the carts with the greatest level of charge first, disconnect devices with the green LEDs first before you disconnect devices with the blue LEDs.
Devices that do not feature a USB-C charging port can be charged using USB-C emulator cables. (Not Included, contact JAR Systems for more info)
USB-C Emulator Cables
3
For Additional Support Call: 866.393.4202 or Email: [email protected]
Trouble-Shooting
Always start troubleshooting with a simple reboot Entire Charging Hub/Shelf Issue
Unplug and replug the power cord. When the cart is connected to power, the LEDs will change color based on the power draw of connected devices (see light indication).
Single Port or Device Issue
Check the back of the charging hub to see if the cart’s power cable is plugged in and connected correctly.
MC-4032-AIR ONLY: Ensure that the power cable connecting the top hub to the bottom hub is plugged in correctly.
Ensure that both of the USB-C cable ends plug into the cart and the device correctly.
When the cart is powered back on, the LED lights will begin to illuminate.
If there is still no charge, disconnect the device from that port (A) and plug into another port (B). If it is still not charging, it may be an issue with the device.
If charging begins when using port (B), exchange the cable from port (B) to port (A). If it begins to charge, the cable (A) is defective and will need to be replaced.
Remove/Replace USB-C Cables
Each cable lock may be secured with up to three screws. Remove all screws with the supplied T10 Torx key (G7). Remove the cable lock. Unplug the cables from the USB-C ports and route them through the cable track. Reverse the process to replace a cable.
Cable Lock Security Screws
Adjusting Device Bay Dividers
Elevate carts feature adjustable device bays with multiple configuration options. Use the guides below to determine which hole pattern to use.
To remove dividers, push in and upward on the front of the divider and guide it out of the slot in the tray. To install the dividers, simply place the tall side of the divider into the rear slot first, then push in and downward to get the other side into the front slot.
16 DEVICE PATTERN
Best for devices up to 1″ wide.
12 DEVICE PATTERN
Best for devices up to 1.25″ wide.
4
For Additional Support Call: 866.393.4202 or Email: [email protected]
Warnings
Warranty
· Power down all devices prior to connecting them to the hub for charging.
· Keep away from moisture and harsh chemicals. Do not place any liquids near the charging cart.
· Any electrical equipment must be used by an adult or with adult supervision.
· Do not connect unsupported items to the charging cart or use for any purpose other than its intended use.
· Do not attempt to obstruct any ventilation openings or dismantle, open, or modify the system in any way.
· Do not sit or stand on the cart or charging hubs.
· Do not use an extension cable or daisy-chain to any other devices.
· Not intended for operation at altitudes greater than 2000 m or 6561 ft above sea level and should not be operated in extreme temperatures. For indoor use only.
Disclaimer
Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty. Since the use of this information, the equipment connected, and the conditions by which any JAR Systems product is used is beyond the control of JAR Systems, it is the obligation of the owner and/or user to determine the correct and safe use of any equipment and product. To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by JAR Systems is limited to the cost of repairing or replacing the failed product or component at the discretion of JAR Systems either within, or outside of warranty periods, and does not extend to any loss or damage which may be caused as a consequence of misuse or failure of the equipment, product or the information contained herein. JAR Systems shall not in any event be liable for economic loss of profits, indirect, special, bodily injuries or consequential damages. Specifications and images are for illustration purposes only. Final product may differ and is subject to change without notice.
This product comes with a warranty that covers any defects in material or workmanship and extends to the original consumer of the product only. JAR Systems, LLC will replace the product with a new or refurbished product, repair the product, send replacement parts, or refund the purchase price of the product, at JAR Systems, LLC’s discretion. This warranty does not cover accidental damage, unreasonable use, neglect, tampering or other causes not arising from defects in material or workmanship.
Any implied warranties last only as long as the warranty periods listed above except where state law does not allow limitations on how long an implied warranty lasts. This includes but is not limited to the implied warranties or merchantability and fitness. JAR Systems, LLC’s responsibility is limited to the actions listed above and nothing else.
This warranty does not cover, and JAR Systems, LLC will not be responsible for, any damages due to loss of use of the product, or any other costs or expenses incurred by you or anyone else who uses the product, whether due to defects, breach of contract, negligence, strict liability or otherwise. JAR Systems is not liable for any indirect, special, incidental or consequential damages related to the product or this warranty. Some states do not allow exclusions or limitations on consequential or incidental damages, so these limitations or exclusions may not apply.
This warranty gives you specific legal rights and you may also have other rights that vary from state to state. This warranty is governed by the laws of Florida, excluding its conflict of laws principles, unless your state requires that its law be used.
Contact JAR Systems for information on the length of warranty on your product(s).
Explore more options for USB-C Charging!
Learn about ways to charge devices in growing technology landscapes. Contact a JAR Systems representative at 866.393.4202 or visit:
JAR-Systems.com/Products
Portfolio of Solutions | JAR Systems
