451-22012-002A SHOUT mcc Hand Helds
Product Information:
- Product Name: SHOUT mcc
- Support Phone Number: 571-833-2169
- Support Email: [email protected]
- Model Number: 451-22012-002A
- Valid Until: March 31, 2023
- Features:
- Iridium Antenna
- GPS Antenna (embedded)
- Device Status
- Rotating Guard
- Resistive Touchscreen
- Micro-B USB
- InLtEeDrfSatcaetus Display
- Power/Back Button
- Emergency Button
- M-Code USB Cable
- DE-15 Connector 1
Product Usage Instructions:
Important Note:
The SHOUT mcc must have a clear view of the sky during
transmission.
Device Status Bar:
The device status bar displays status symbols along the top
three lines of all screens. Some symbols may not appear until an
event is initiated, such as sending or receiving a message.
Battery Indicator:
The battery indicator shows the current battery charge level. It
also indicates if the battery is being charged and if the audio
alert is on.
Iridium Signal and M-Code Signal Date:
The Iridium signal and M-Code signal date symbols indicate the
strength of the Iridium and M-Code signals respectively.
Geofences:
The geofences symbol indicates whether the geofence feature is
enabled or disabled. A bright white symbol means geofences are on,
while a dimmed symbol means geofences are off.
Time and Tracking:
The time symbol displays the current time. The tracking symbol
indicates whether tracking is on or off. A bright white symbol
means tracking is on, while a dimmed gray symbol means tracking is
off.
Mailbox Check and Call Out:
The mailbox check and call out symbols indicate whether mailbox
check and call out features are enabled or disabled. A bright white
symbol means the feature is on, while a dimmed gray symbol means
the feature is off. Mailbox check is only available when the
Iridium link is enabled.
911 Emergency:
To activate 911 Emergency, press the 911 Emergency button on the
device. The status bar turns red, and an alert is immediately sent
to a designated monitoring center(s). To cancel 911 Emergency,
navigate to the Tracking Menu and select Cancel 911. Note that
turning off the SHOUT mcc does not cancel the emergency; you must
select the Cancel 911 option to cancel the emergency.
Power On/Off Device:
To power on the device, press the Power button for two seconds.
To power off the device, also press the Power button for two
seconds. Follow the on-screen instructions to confirm turning off
the device. You can unplug the M-Code USB cable while powered off
to conserve power.
Connect M-Code Device:
1. Power on the SHOUT mcc and the DAPs device.
Messages:
Check Messages:
1. Select Texting from the Home screen.
2. Select Inbox from the Texting screen.
Compose Message:
1. Select Texting from the Home screen.
2. Select Compose from the Texting screen.
Note: From the Compose menu, you can enter, edit free text
messages, and send canned messages, or a combination of canned and
free-text messages to a NOC server, a predefined list of email
addresses, and/or any email addresses entered via the
keyboards.
Sent Messages:
The Sent Messages section displays previously sent messages.
SHOUT mcc QUICK START GUIDE
Support Phone#: 571-833-2169 [email protected] 451-22012-002A 2023-03-31
DEVICE DESCRIPTION: The SHOUT mcc is a pocket-sized, low-cost, IP67 rated, handheld satellite tracker and messaging device. The SHOUT mcc comprises a chassis, touchscreen, a Power/Back button, an LED Status Display, a guarded Emergency button, a Micro-B USB port, and an Iridium antenna. The touchscreen allows for quick access to menus and ease of text entry via on-screen soft keyboards. In addition, the M-Code PLI data is streamed to the SHOUT mcc device when connected to an Army DAPs A-PNT device with a M-Code USB supplied cable.
Iridium Antenna
GPS Antenna (embedded)
Device Status
Rotating Guard
Resistive Touchscreen
Micro-B USB
InLtEeDrfSatcaetus Display
Power/Back Button
Emergency Button
Micro- B USB Connector
M-Code USB Cable
IMPORTANT: The SHOUT mcc must have a clear view of the sky during transmission.
DE-15 Connector 1
SHOUT mcc QUICK START GUIDE
Support Phone#: 571-833-2169 [email protected] 451-22012-002A 2023-03-31
DEVICE STATUS BAR: Device status bar displays status symbols along the top three lines of all screens. Some symbols do not appear until an event is initiated, such as sending or receiving a message.
Battery Indicator: battery is being charged Audio alert is on
One or more unread messages are in the Inbox One or more messages are in the Outbox ready to be sent or one or more messages in queue failed to send
Iridium Signal
M-Code Signal Date
Geofences: On – symbol is bright white Off – symbol is dimmed
Time
Time till the next tracking report transmits.
Tracking on when the symbol is bright white. The symbol turns dimmed gray when tracking is off
Mailbox Check is on when the symbol is bright white. The symbol turns dimmed gray when Mbox Check is off. It is only
available when the Iridium link is enabled. It checks for any pending messages at the Iridium Gateway.
Call Out is on when the symbol is bright white. The symbol turns dimmed gray when Call Out is off.
2
SHOUT mcc QUICK START GUIDE
911 EMERGENCY Activate 911 Emergency: Press the 911 Emergency button on the device.
The Status bar turns red and the status LED turns solid green. An alert is immediately sent to a designated monitoring center(s).
Support Phone#: 571-833-2169 [email protected] 451-22012-002A 2023-03-31
Cancel 911 Emergency: Navigate to the Tracking Menu and select Cancel 911 .
NOTE: The Cancellation message is queued in the Outbox to be transmitted, and the Emergency mode ends immediately. Turning the SHOUT mcc off does not cancel the Emergency mode. You MUST select the Cancel 911 option to cancel the emergency.
POWER ON/OFF DEVICE Press the Power button for two seconds to turn on device. Press the Power button for two seconds to turn off device.
o A Warning message displays. Press Turn Off. o The Power Down or Lock screen displays o Press Turn Off, Lock, or Cancel o Unplug the M-Code USB cable while powered off to allow the
SHOUT mcc to conserve power.
Power Button 3
SHOUT mcc QUICK START GUIDE
Support Phone#: 571-833-2169 [email protected] 451-22012-002A 2023-03-31
CONNECT M-CODE DEVICE 1. Power on the SHOUT mcc. 2. Power on the DAPs device.
This device contains the M-Code receiver. IMPORTANT: Devices must be powered on, prior to connecting serial cable to devices. If not, battery life is shortened. 3. Connect the DE-15 connector on the M-Code USB cable to the DE-15 connector port on the DAPS device, and connect the Micro-B USB connector on the M-Code USB cable to the Micro-B USB connector port on the SHOUT mcc device. “M-Code” displays in the Device Status Bar. IMPORTANT: If the M-Code USB cable disconnects from either device, the SHOUT mcc will not receive M-Code PLI data and will revert to the commercial GPS for PLI data.
MESSAGES
Check Messages
1. Select Texting from the Home screen.
2. Select Inbox from the Texting screen.
· Read messages have a white opened envelope symbol next to them. · Unread messages have a green closed envelope symbol. · A closed envelope symbol appears at the top of the screen when an unread message(s) is in the Inbox.
4
SHOUT mcc QUICK START GUIDE
Compose Message
1. Select Texting from the Home screen.
2. Select Compose from the Texting screen.
NOTE: From the Compose menu, you can enter, edit free text messages, and send canned messages, or a combination of canned and free-text messages to: a NOC server, a predefined list of email addresses, and/or any email addresses entered via the keyboards. Sent Messages
1. Select Texting from the Home screen, then select Sent from the Texting screen . This displays a list of messages that were successfully sent to the NOC. A message can be resent, forwarded, or deleted.
CHARGING BATTERY Fully charge the SHOUT mcc before use. The SHOUT mcc must be kept in
environments between 0°C (32°F) and 45°C (113°F) when charging. The SHOUT mcc can be charged with an AC wall adapter or connect to a standard
USB device.
NOTE: the battery symbol turns red when the remaining power is less than 20%. A warning message appears when the remaining power is less than 10%.
Support Phone#: 571-833-2169 [email protected] 451-22012-002A 2023-03-31
5
