OCC0100A/02 BP Sensor WH
Product Information
The product mentioned in the user manual is the OCC0100A/02 BP
Sensor WH and OCC0101A/02 DL BP Sensor WH. It is a sensor device
used for measuring blood pressure.
The installation instructions provide information on the
dimensions of the device, battery specifications, and safety
precautions for battery replacement.
The device operates on a R6 Li-Ion 3.6 V battery with a lifetime
of more than 8 years. The user manual emphasizes that battery
replacement should be done by a skilled or instructed person to
avoid any risks. Incorrect replacement of the battery can lead to
an explosion. Used batteries should be disposed of according to the
provided instructions.
The device is equipped with a FOV indicator to indicate the
field of view. It also complies with FCC radiation exposure limits
and EU requirements on electromagnetic field exposure for health
protection.
Product Usage Instructions
1. Installation: Follow the provided installation instructions
to mount the OCC0100A/02 BP Sensor WH or OCC0101A/02 DL BP Sensor
WH. Pay attention to the dimensions mentioned in the manual.
2. Battery Replacement: Only skilled or instructed individuals
should replace the battery. Ensure that the replacement battery is
the correct type to avoid any risks of explosion. Dispose of used
batteries according to the provided instructions.
3. FOV Indicator: The device features a FOV indicator that helps
determine the field of view. Refer to the manual to understand how
to interpret and use this indicator.
4. Safety Precautions: Maintain a minimum distance of 200 mm
between the device and the human body during installation and
operation to comply with radiation exposure limits.
5. Compliance: The device complies with FCC radiation exposure
limits and EU requirements for limiting electromagnetic field
exposure. Ensure that the device is used at a distance of 200 mm
from the body to meet RF specifications.
6. Additional Information: For any additional information or
assistance, refer to the Philips website at www.philips.com/lighting. If
required, contact the UK importer at the provided address: Signify
Commercial UK Limited, 3 Guildford Business Park, GU2 8XG.
OCC0100A/02 BP Sensor WH, OCC0101A/02 DL BP Sensor WH
Installation Instructions
Instructions d’installation Instrucciones de instalación
Istruzioni per l’installazione Installatie-instructies
Installationsanweisungen
· F 10 2.4 GHz,
·
·
· ISM
·
86.5 mm (3.41 in)
InInstsrtuaclltaitoionns
2x
OCC010xA/02
26.4 mm (1.04 in) 29.9 mm (1.18 in)
1
1x R6 Li-Ion 3.6 V lifetime >8 years
D Note Battery replacement must be done by skilled or instructed person. B Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
+
BG
xxxx xxx xxxxx
23 May 2023
max +45 ° C
min -5° C
RkHg
00.0- 9905%kg
Lithium
www.philips.com/lighting
2
3
> 3 m (9.8 ft)
h
h = 2.5 to 4 m (8.2 to13.1 ft)
3.6 m (11.8 ft) 5.4 m (17.7 ft)
5.4 m (17.7 ft) 7.2 m (23.6 ft) At h = 2.5 m (8.2 ft)
4
min. 0.7 x h
5
h
lux ø 1.4 x h
1 FOV indicator
2 3
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 200 mm between the radiator and a human body.
RF Exposure Information This device meets the EU requirements (2014/53/EU) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 200 mm from your body.
ISED Statement: This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device.
6 OCC0101A/02 only
Green 10 s
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 200 mm entre le radiateur et un corps humain. Hereby, Signify declares that the radio equipment type OCC0100A-02 and OCC0101A/02 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: http://www.philips.com/red
© 2023 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the
accuracy or completeness of the information included herein is given
and any liability for any action in reliance thereon is disclaimed. Philips
and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their
respective owners.
xxxx xxx xxxxx
23 May 2023
UK importer address: Signify Commercial UK Limited 3, Guildford Business Park, GU2 8XG
www.philips.com/lighting
LED & Conventional lighting solutions | Philips lighting
