EH-WSTHDUS-501 6-Shelf Storage Unit
Product Information
ITEM#EH-WSTHDUS-501 SKU#1000026321
The product comes with a tip-resistant kit that needs to be
fixed to the wall to prevent tipping over. It includes a washer
(F), anchor (G), and screw (H).
For safety reasons, it is imperative that the unit be mounted on
the wall or floor. The unit can tip over causing severe injury or
death if not securely mounted.
It is important to not exceed the recommended weight limits and
evenly distribute the weight on each level. Always keep the heavier
loads on the bottom.
Before cutting, drilling, or hammering into any wall or floor
surface, verify the location of electrical, plumbing, and gas
lines. Cutting may cause serious injury.
Product Usage Instructions
- Identify the location on the wall where you want to install the
unit. - Use an electric drill to screw anchor (G) in the wall at the
height of the top shelf. - Put washer (F) over screw (H).
- Install screw (H) to the wall and connect the washer (F) and
the unit. - Verify that the unit is securely mounted and levelled with
included hardware (when applicable). - Do not sit or stand on or allow children to climb, sit or stand
on the assembled product.
ITEM#EH-WSTHDUS-501 SKU#1000026321
F – Washer x 1 G – Anchor x 1 H – Screw x 1
5 Tip resistant kit Fix to wall to prevent tipping over.
Screw anchor (G) in wall at the height of the top shelf.
Put washer (F) over screw (H), install the
screw (H) to the wall and connect the
washer (F) & the unit.
Electric drill is needed but not provided.
H
FG
! WARNING
Unit must be placed on a level surface or leveled with included hardware (when applicable).
Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
For safety reasons, it is imperative that this unit be mounted on the wall or floor.
Unit can tip over causing severe injury or death.
Do not exceed the recommended weight limits.
Evenly distribute the weight on each level and always keep the heavier loads on the bottom.
Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical, plumbing and gas lines. Cutting may cause serious injury.
ITEM#EH-WSTHDUS-501 SKU#1000026321
F – Lavadora x1 G – Ancla x1 H – Tornillo x1
5 Kit resistente a la punta Fijar a la pared para evitar que se vuelque.
Atornille el ancla (G) en la pared a la altura del
estante superior.
Coloque la arandela (F) sobre el tornillo (H),
instale el tornillo (H) en la pared y conecte
la arandela (F) y la unidad.
H
Se necesita taladro eléctrico pero no se
proporciona.
FG
! ADVERTENCIA
El producto debe colocarse en una superficie nivelada, o nivelarse con el herraje incluido (si aplica).
No siente, pare o permita que los niños suban, se sienten o se paren en el producto ensamblado.
Por razones de seguridad, es indispensable que el producto quede fijo en la pared.
El producto se puede volcar causando lesiones graves o la muerte.
No rebasar el límite de peso recomendado.
Distribuir la carga uniformemente en cada nivel y mantener siempre lo más pesado en la parte inferior.
Antes de cortar, perforar o martillar en la pared o piso, verificar la ubicación de la instalación eléctrica, tuberías y líneas de gas; cortarlas puede causar graves lesiones.
