C Cattleya Ca2226-4w Led Bubble Crystal Vanity Light Instruction Manual

CA2226-4W LED Bubble Crystal Vanity Light

Product Information

The LED Wall Mount Fixture is a dimmable light fixture that
operates on 120VAC input. It is designed to be mounted on a wall
and comes with a mounting package that includes a mounting wall
plate, anchor screws, and fixture screws. The product does not
require a bulb replacement as it uses LED technology.

Product Usage Instructions

  1. Before installation, turn off the main power at the circuit
    breaker to prevent electric shock.
  2. Ensure all electrical connections are in accordance with local
    and National Electrical Code (N.E.C.) standards. If you are
    unfamiliar with proper electrical wiring connections, obtain the
    services of a qualified electrician.
  3. Remove the fixture and the mounting package from the box and
    make sure all parts are present by referencing the illustrations on
    the installation instructions.
  4. Place the mounting wall plate over the outlet box, aligning the
    mounting slots of the wall plate with holes of the outlet box. Use
    a level to ensure the wall plate is straight.
  5. Replace the mounting wall plate over the outlet box, aligning
    the narrow end of each keyhole slot with its respective wall
    anchor. Feed the anchor screws through keyhole slots and thread
    them into the wall anchors until wall plate is flush against the
    wall. Additionally, fasten the wall plate to thread holes in outlet
    box using two outlet box screws.
  6. Pull the supply wires and house ground wire out from the outlet
    box before attaching wall plate to outlet box. Make electrical
    connections by connecting the black fixture black wire to the black
    supply wire and the white fixture wire to the white supply wire
    using wire nut. Connect the fixture ground wire to the supply
    ground wire together using wire nut. Wrap all wire connections with
    electrical tape to ensure secure connection.
  7. Place the fixture base over the mounting wall plate and secure
    it to the wall plate by using four fixture screws.
  8. Installation is complete. Restore power at the circuit breaker
    and turn light switch on to activate the fixture.

INSTALLATION INSTRUCTIONS
LED WALL MOUNT FIXTURE 120VAC Input, Dimmable
READ AND FILLOW SAFETY INFORMATION
Turn off the main power at the circuit breaker before installing and servicing the fixture to prevent possible injury from electric shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
INSTALLATION & ASSEMBLEY
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
1. Place the mounting wall plate(3) over the outlet box(1), align the mounting slots of the wall plate with holes of the outlet box as shown. Use a level to ensure the wall plate(3) is straight.
2. Mark the location of the keyhole slots of the wall plate on the wall. Drill a ¼” holes at the narrow end of each keyhole slot marking on the wall. Carefully hammer a wall anchor into each drilled hole.
3. Replace the mounting wall plate(3) over outlet box, align the narrow end of each keyhole slot with its respective wall anchor. Feed the anchor screws (8) through keyhole slots and thread them into the wall anchors until wall plate is flush against the wall. Additionally, fasten the wall plate to thread holes in outlet box using two outlet box screws, as shown.
4. Pull the supply wires (4 &5) and house ground wire (6) out from the outlet box (1) before attaching wall plate to outlet box. Make electrical connections, connect the black fixture black wire (10) to the black supply wire (5) and the white fixture wire (9) to the white supply wire (4) using wire nut (7). Connect the fixture ground wire (11) to the supply ground wire (6) together using wire nut (7). Wrap all wire connections with electrical tape to ensure secure connection.
5. Place the fixture base (13) over the mounting wall plate (3) and secure it to the wall plate by using four fixture screws (12).
6. Installation complete, restore power at the circuit breaker and turn light switch on to activate this fixture.
Care and maintenance ­ Use dry and clean cloth to wipe the surface of the fixture.
Replacement- This LED product has no bulb to replace.

1.OUTLET BOX (EXCLUDED) 2. OUTLET BOX SCREWS 3. MOUNTING WALL PLATE 4. WHITE SUPPLY WIRE 5. BLACK SUPPLY WIRE 6. HOUSE GROUND WIRE 7. WIRE NUTS

8. ANCHOR SCREWS 9. WHITE FIXTURE WIRE 10. BLACK FIXTURE WIRE 11. FIXTURE GROUND WIRE 12. FIXTURE SCREWS 13. FIXTURE BASE

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals