Flos Oblique Vincent Van Duysen, 2020 Instruction Manual

Oblique Vincent Van Duysen, 2020

Product Information

The product is a FLOS light fixture with an IP 20 rating. It is
designed for use in the USA. The light source is replaceable, but
only for LED bulbs. The control gear is also replaceable, but this
should be done by an end-user.

Product Usage Instructions

1. Ensure that the power supply is turned off before handling the
   light fixture.
2. To replace the light source, follow these steps:
   1. Locate the light source compartment on the fixture.
   2. Remove the existing light source by gently pulling it out.
   3. Insert the new LED light source into the compartment, ensuring
      it is securely in place.
3. To replace the control gear, follow these steps:
   1. Locate the control gear compartment on the fixture.
   2. Remove the old control gear by carefully disconnecting any
      cables or connectors.
   3. Insert the new control gear into the compartment, making sure
      all connections are secure.
4. After replacing any components, turn on the power supply and
   test the functionality of the light fixture.
5. To adjust the brightness of the light, use the TIME control
   dial. The range is from 1% to 100% brightness.

Note: For any further assistance or if you encounter any issues,
please refer to the full user manual or contact customer
support.

4

5

6

7

8

.

.

.

FLOS .

.

!
: –
IP 20

.
.

10

11

CLICK!
USA
Replaceable (LED only) light source by a professional Replaceable control gear by an end-user
12

13

14

15

16

17

TIME

1 %

100 %

18

19

22

23

24

25

26

27

28

29

30

31