Forma Ideale 11011361 Tenerife Kom Hall Unit Instruction Manual

Forma Ideale 11011361 Tenerife Kom Hall Unit Instruction Manual

ASSEMBLING INSTRUCTION

LANZAROTE KOM/ TENERIFE KOM

11011361 TENERIFE KOM - Label 211011361 TENERIFE KOM - Label 1

CODE:     UP 01165
Version:    03-27042022

11011361 TENERIFE KOM - Tools 111011361 TENERIFE KOM - Tools 211011361 TENERIFE KOM - Tools 3

The specified installation time applies to professionally trained persons (professional installers)

BEFORE STARTING, REFER TO THE ASSEMBLING ADVICE IN ANNEX

LANZAROTE KOM

LANZAROTE KOM

TENERIFE KOM

TENERIFE KOM

LANZAROTE KOM

36490380 mm428 mm16 mm

2

36793386 mm357 mm16 mm

1

36794866 mm400 mm25 mm

2

36795842 mm396 mm3 mm

1

37439386 mm374 mm16 mm

2

Package 1/1

36490

2

36793

1

36794

2

36795

1

37439

2

LANZAROTE KOM - 1

LANZAROTE KOM/ TENERIFE KOM

TENERIFE KOM

36793386 mm357 mm16 mm

1

36794866 mm400 mm25 mm

2

36795842 mm396 mm3 mm

1

36859380 mm428 mm21 mm

2

37439386 mm374 mm16 mm

2

Package 1/1

36793

1

36794

2

36795

1

36859

2

37439

2

TENERIFE KOM - 1

TENERIFE KOM

  1. Assembly of the product should be done on a clean and soft surface (cardboard, fabric)
  2. To prevent damage of the product, it is necessary to adhere to the assembly instructions
  3. While reporting defective products, please quote codes in manual
TENERIFE KOM - Assembly 1TENERIFE KOM - Assembly 2TENERIFE KOM - Assembly 3TENERIFE KOM - Assembly 4TENERIFE KOM - Assembly 13

TENERIFE KOM - Assembly 14

TENERIFE KOM - Assembly 5TENERIFE KOM - Assembly 6TENERIFE KOM - Assembly 7TENERIFE KOM - Assembly 8
TENERIFE KOM - Assembly 9TENERIFE KOM - Assembly 10TENERIFE KOM - Assembly 11TENERIFE KOM - Assembly 12
A
Ø8×30TENERIFE KOM - Accessories Ax12
B
Ø15/12TENERIFE KOM - Accessories Bx12
C

TENERIFE KOM - Accessories C

x12

D

TENERIFE KOM - Accessories D

x12

E

TENERIFE KOM - Accessories E

x5

F
4×30TENERIFE KOM - Accessories Fx10
G

TENERIFE KOM - Accessories G

x4

H

TENERIFE KOM - Accessories H

x4

I

TENERIFE KOM - Accessories I

x2

J
4×30TENERIFE KOM - Accessories Jx4
K

TENERIFE KOM - Accessories K

x8

L

TENERIFE KOM - Accessories L

x4

M

TENERIFE KOM - Accessories M

x2

N
3.5×16TENERIFE KOM - Accessories Nx4
O

TENERIFE KOM - Accessories O

x1

PQRST
UVWXYZAaAbAcAd

1

D x 12

TENERIFE KOM - Accessories D

TENERIFE KOM - Installation 1

2

A x 8

TENERIFE KOM - Accessories A

Ø8×30

B x 8

TENERIFE KOM - Accessories B

Ø15/12

G x 4

TENERIFE KOM - Accessories G

TENERIFE KOM - Installation 2

3

A x 4

TENERIFE KOM - Accessories A

Ø8×30

B x 4

TENERIFE KOM - Accessories B

Ø15/12

TENERIFE KOM - Installation 3

4

TENERIFE KOM - Installation 4

5

TENERIFE KOM - Installation 5

6

TENERIFE KOM - Installation 6

7

E x 5

TENERIFE KOM - Accessories E

F x 10

TENERIFE KOM - Accessories F

4×30

K x 8

TENERIFE KOM - Accessories K

TENERIFE KOM - Installation 7 - 1TENERIFE KOM - Installation 7 - 2

TENERIFE KOM - Installation 7 - 3

TENERIFE KOM - Installation 7 - 5

8

C x 12

TENERIFE KOM - Accessories C

L x 4

TENERIFE KOM - Accessories L - 1

TENERIFE KOM - Installation 8 - 1TENERIFE KOM - Installation 8 - 2

LANZAROTE KOM

9

LANZAROTE KOM - Installation 9

10

H x 4

TENERIFE KOM - Accessories H

I x 2

TENERIFE KOM - Accessories I

J x 4

TENERIFE KOM - Accessories J

4×30

LANZAROTE KOM - Installation 10

11

LANZAROTE KOM - Installation 11

12

O x 1

TENERIFE KOM - Accessories O

LANZAROTE KOM - Installation 12

TENERIFE KOM

9

H x 4

TENERIFE KOM - Accessories H

M x 2

TENERIFE KOM - Accessories M

N x 4

TENERIFE KOM - Accessories N

3.5×16

TENERIFE KOM - Installation 9 - 1TENERIFE KOM - Installation 9 - 2

10

TENERIFE KOM - Installation 10

11

O x 1

TENERIFE KOM - Accessories O

TENERIFE KOM - Installation 11

TENERIFE KOM - Installation - 1

TENERIFE KOM - Installation - 2TENERIFE KOM - Installation - 3TENERIFE KOM - Installation - 4

All PANEL and UPHOLSTERED furniture is of acknowledged quality, certified by an independent institution accredited for quality testing. All electrical components are safe to use and certified by an accredited institution specialized in testing electrical devices.
PANEL FURNITURE – Products are moisture-sensitive. It is required to keep them in enclosed spaces, at 50-70% humidity and temperature 18°C-25°C.Use only dry, soft cloth and agents without abrasive properties for cleaning all wood and refined chipboard products.
UPHOLSTERY –Fabric upholstered products may be vacuum cleaned. Use water at the temperature of 40°C with neutral chemical agents for cleaning the upholstery fabric. Vinyl, faux leather and leather upholstered products must not be cleaned by dry-cleaning agents, solvents, polishing agents, oils, abrasive agents and ammonium soap.
ELECTRICAL COMPONENTS – Do not cover them and provide enough space around heat sources in order to release the heat.
NOTES AND WARNINGS ON GENERAL PRODUCT SAFETY: There is a risk of injury in case of inappropriate use of the product. Assembly shall be conducted by trained personnel.
Furniture MUST be fixed to a wall if foreseen by assembling instructions, all in order to avoid tipping. Check the type and strength of the wall. Glass elements must be handled with caution in order to avoid injuries caused by broken glass. Products with built-in mechanisms, as well as products with flexible design (e.g. adjustable backrest chairs) should be handled with caution in order to avoid injuries (hand or finger injuries). Do not expose products to high temperatures, heat sources and open flame in order to avoid damages, combustion and fire. Keep smaller elements out of the reach of children in order to avoid the risk of swallowing and choking. Additional attention should be paid when handling products with sharp edges around children.

Furniture made from natural wood and panel materials

Dear customer, Thank you for your order! No matter if you bought a piece of furniture made from natural wood, a high-gloss front or a plastic front – every piece of furniture has unique characteristics. Even the texture and structure of wood, such as small knots in natural wood furniture, are part of the individual charisma of each piece of furniture. Since natural wood furniture are permanently exposed to climate and humidity fluctuations, changes to the surface may occur (e.g. hair cracks or changes in colour) in some cases. In general, brightness decreases and colour saturation increases in the course of time – the wood darkens.
The changes mentioned above are normal for natural raw materials such as wood.
This booklet provides some care tips for your piece of furniture so that you can enjoy it for a long time.

The following applies in general:

  • Don’ft place any hot objects on the furniture.
  • Don’ft place candles directly on the furniture.
  • Immediately wipe off any spilled liquids.
  • Regularly check if the screws and fittings are tight.
  • The typical, aromatic wooden odour is always a proof of quality for natural wood furniture.
  • The natural emission of resin may produce bright spots on the knots which can be polished with a dry, lintfree cloth.
  • Initially, a slight intrinsic odour is unavoidable for other wooden, paint, leather or upholstery materials too. These odours automatically disappear after a while. If you want to speed up this process, ventilate more often at the beginning and/or wipe out the furniture with a slightly damp cloth which was soaked in water mixed with a small amount of vinegar.
  • Keep these notes in a safe place.

Care notes for stripped/oiled furniture made of natural wood
The surface of your new piece of furniture has been treated with pure organic oil. We recommend an occasional after treatment with suitable furniture oil to preserve this natural, stripped/oil gloss. Since some residue of natural oil may remain on the furniture due to the surface treatment method, we recommend to rub off the furniture with a lint-free cloth. After use, let the cloth dry completely before disposal.
Care notes for untreated/painted furniture made of natural wood
Using a moderately damp cloth is the most suitable method for cleaning the surface. Attention: Corrosive cleaners as well as cleaners containing solvents or polish must not be used.
Care notes for furniture made of panel materials
We recommend using a soft, lint-free cloth or a shammy for conditioning your piece of furniture made of panel materials. Wipe off the surfaces with a slightly damp cloth or shammy.

The following applies in general: Please don’ft use the following detergents or cleaning agents at all:

  • microfibre cloths or dirt erasers. They often contain fine abrasive particles which can cause scratches on the surfaces;
  • aggressive chemical substances as well as abrasive cleaning agents or solvents. They may damage the surfaces too;
  • scouring powder, steel wool or scouring pads. They destroy the surface so badly that reconditioning is impossible;
  • vacuum cleaners. The nozzles and brushes can cause scratches on the surfaces;
  • steam cleaners. The surfaces may be damaged or separated from the ground due to the high pressure and heat of the water vapour.

Your product development team

LANZAROTE KOM/ TENERIFE KOM

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals