Half Height Bun Pan Rack

REGENCY Space Solutions HALF HEIGHT BUN PAN RACK

Product Information:

The REGENCY Space Solutions Half Height Bun Pan Rack is designed
to provide convenient storage and transportation for bun pans. It
features a sturdy construction and comes with casters for easy
mobility. The rack can accommodate both full-size and half-size bun
pans, making it versatile for various baking needs.

Assembly Instructions:

Tools Needed: An Adjustable Wrench OR 10mm and
14mm Socket are required for assembly.

Included Parts:

• (2) Pan Slide Frames
• (4) Crossbars
• (4) 5 Casters
• (4) U Brackets
• (8) Bolts

Steps to Assemble the Pan Rack:

1. Insert the (2) Long Crossbars into the top holes of the Pan
   Slide Frames.

   Attach U Brackets (2 for each Crossbar) to the outside of the
   Pan Slide Frames using the 10mm Bolts. Hand-tighten the bolts* and
   repeat the process for the other side.

2. Insert the (4) Casters** into the bottom of the Frames. The
   locking casters should be installed in the same end of the rack so
   they can easily be set.
3. Once the casters are properly aligned, the remaining (2) Short
   Crossbars can be installed on the bottom of the rack using the 14mm
   Bolts.***
4. Put a bun pan in both the top and bottom of the rack to ensure
   your bun pan is square.
5. Tighten each bolt with a wrench. Your bun pan rack is now ready
   to use.

* NOTE: Be sure not to over-tighten the bolts,
or you may damage the Frame and/or Crossbars.

** NOTE: Make sure the hole in the caster post
is aligned with the hole in the collar.

*** NOTE: The bottom Crossbars do not require U
Brackets; they can be bolted on directly through the hole in the
collar.

If you need further assistance, you can visit www.regencytablesandsinks.com

REGENCY
Space Solutions

HALF HEIGHT
BUN PAN RACK

ASSEMBLY INSTRUCTIONS
TOOLS NEEDED: An Adjustable Wrench OR 10mm and 14mm Socket are required for assembly.

A

B

C

D E

INCLUDED PARTS
A (2) Pan Slide Frames
B (4) Crossbars
· (2) Top (Long) · (2) Bottom (Short)

FINAL PRODUCT

Need Help?
Scan here to follow along with the full assembly video!

C (4) 5″ Casters

D (4) U Brackets

E (8) Bolts
· (4) 10mm (Top) · (4) 14mm (Bottom)
REGENCYTABLESANDSINKS.COM

06/2022

ASSEMBLING THE PAN RACK

1 Insert the (2) Long Crossbars into the top holes of the Pan Slide Frames.

Attach U Brackets (2 for each Crossbar) and to
2 the outside of the Pan Slide Frames using the 10mm Bolts. Hand-tighten the bolts* and repeat the process for the other side.

Insert the (4) Casters** into the bottom of the
3 Frames. The locking casters should be installed in the same end of the rack so they can easily be set.

Once the casters are properly aligned, the
4 remaining (2) Short Crossbars can be installed on the bottom of the rack using the 14mm Bolts.***

5 Put a bun pan in both the top and bottom of the rack to ensure your bun pan is square.

6 Tighten each bolt with a wrench. Your bun pan rack is now ready to use.

* NOTE: Be sure to not over-tighten the bolts, or you may damage the Frame and/or Crossbars. ** NOTE: Make sure the hole in the caster post is aligned with the hole in the collar. *** NOTE: The bottom Crossbars do not require U Brackets, they can be bolted on directly though the hole in the collar.
REGENCYTABLESANDSINKS.COM

References

• Home | Regency