Contents hide

2 Product Information: SD Card Real Time Recorder and AC/DC Magnetic Meter

G-3003SD AC-DC Magnetic Meter

Product Information: SD Card Real Time Recorder and AC/DC
Magnetic Meter

The SD Card Real Time Recorder and AC/DC Magnetic Meter is a
professional magnetic measurement tool that can measure DC or AC
magnetic fields. It has a wide measurement range and can measure in
units of Gauss (G) or milli Tesla (mT). The meter has a DC magnetic
range of 300.00 mT and 3000.0 mT, and an AC magnetic range of
150.00 mT and 1500.0 mT. The resolution for DC measurement is 0.01
mT/0.1 mT, 0.1 G/1 G, and for AC measurement is 0.01 mT/0.1 mT, 0.1
G/1 G. The meter features a Hall sensor, zero adjustment, and a
separate probe for easy measurement. It also has a real-time SD
memory card datalogger with a built-in clock and advanced memory
card settings.

Features:

Wide range, professional magnetic measurement
Unit: G (Gauss), mT (milli Tesla)
DC or AC magnetic measurement
DC magnetic range: 300.00 mT, 3000.0 mT
AC magnetic range: 150.00 mT, 1500.0 mT
Resolution: 0.01 mT/0.1 mT, 0.1 G/1 G
DC polarity: N/S (north/south pole)
Sensor: Hall sensor
Zero adjustment
Separate probe, easy to make the measurement
Real-time SD memory card datalogger, built-in clock
Datalogger Sampling Time Setting range
Memory Card Advanced setting
Data Hold Memory Recall Sampling Time of Display Data
Output
Operating Temperature: 0 to 50°C
Operating Humidity: Less than 85% R.H.
Power Supply: Alkaline or heavy duty DC 1.5 V battery (UM3, AA)
x 6 PCs, or equivalent. ADC 9V adapter input (AC/DC power adapter
is optional).

General Specifications:

Circuit: Custom one-chip of microprocessor LSI circuit
Display: LCD size: 52 mm x 38 mm. Dot matrix LCD with
backlight
Measurement: mT milli Tesla Unit: G Gauss
Accuracy: DC, AC
Sensor: Hall sensor
Frequency: AC measurement: 50 Hz/60 Hz
Temp.: Probe head build the Temp. sensor Compensation for using
the ATC (automatic Temp. for hall sensor compensation)
Field Direction: Uniaxial
Power Current:
- Normal operation (w/o SD card save data and LCD Backlight is
  OFF): Approx. DC 14 mA
- When SD card save the data and LCD Backlight is OFF): Approx.
  DC 37 mA
- If LCD backlight on, the power consumption will increase
  approx. 12 mA
Weight Dimension:
- Meter: 489 g/1.08 LB. 177 x 68 x 45 mm (7.0 x 2.7x 1.9
  inch)
- Probe: 198 x 25 x 19 mm (7.8 x 1.0 x 0.7 inch)
Accessories Included:
- Instruction manual: 1 PC
- Magnetic Probe: 1 PC
- Hard carrying case (CA-06): 1 PC
- 1.413 mS Conductivity Standard Solution: CD-14 SD memory card
  (2 GB)
Optional Accessories:
- AC to DC 9V adapter
- USB cable, USB-01
- RS232 cable, UPCB-02
- Data Acquisition software, SW-U801-WIN
- Excel data Acquisition software, SE-E802

Product Usage Instructions:

To use the SD Card Real Time Recorder and AC/DC Magnetic Meter,
follow these steps:

Insert six alkaline or heavy duty DC 1.5 V batteries (UM3, AA)
or equivalent into the meter or connect an ADC 9V adapter input
(AC/DC power adapter is optional).
Attach the magnetic probe to the meter’s separate probe, and
turn on the meter by pressing the power button.
Select the measurement unit for Gauss (G) or milli Tesla (mT)
and select the DC or AC magnetic measurement mode.
Select the range for measurement. The DC magnetic range is
300.00 mT and 3000.0 mT, and the AC magnetic range is 150.00 mT and
1500.0 mT.
Adjust the zero if needed, and make sure the probe is aligned
with the magnetic field to be measured.
The measurement reading will be displayed on the LCD screen
with the option to freeze the display reading, display the maximum
and minimum values, and recall data from memory.
For real-time data recording, insert an SD memory card (1 GB to
16 GB) into the meter and set the clock time (Year/Month/Date,
Hour/Minute/Second), sampling time, auto power off management, beep
sound on/off, and decimal point of SD card setting.
For manual data recording, press the data logger button once to
save data one time. Set the sampling time to 0 second for manual
mode, or select the 1 to 99 position (location) number.
For data output, connect the optional RS232 cable UPCB-02 or
USB cable USB-01 to get the RS232 plug or USB plug. The meter also
comes with Data Acquisition software SW-U801-WIN and Excel data
Acquisition software SE-E802.

View Fullscreen

SD card real time recorder

AC/DC MAGNETIC METER

Model : MG-3003SD

ISO-9001, CE, IEC1010

LUTRON ELECTRONIC

SD card real time data recorder
AC/ DC MAGNETI C METER

Model : MG-3003SD

FEATURES
* Wide range, professional magnetic measurement. * Unit : G ( Gauss ), mT ( milli Tesla ). * DC or AC magnetic measurement. * DC magnetic range : 300.00 mT, 3000.0 mT. * AC magnetic range : 150.00 mT, 1500.0 mT. * Resolution : 0.01 mT/ 0.1 mT, 0.1 G/ 1 G. * DC polarity : N/ S ( north/ south pole ). * Sensor : Hall sensor. * Zero adjustment. * Separate probe, easy to make the measurement. * Real time SD memory card Datalogger, built-in Clock
and Calendar, sampling time can set from 1 sec to 8 hour 59 min. 59 sec. * Manual datalogger is available, during execute the manual datalogger function, it can set the different location no. ( position 1 to position 99 ). * I nnovation and easy operation, computer is not need to setup extra software, after execute datalogger, just take away the SD card from the meter and plug in the SD card into the computer, it can down load the all the measured value with the time information ( year/ month/ date/ hour/ minute/ second ) to the Excel directly, then user can make the further data or graphic analysis by themselves. * SD card capacity : 1 GB to 16 GB. * LCD with green light backlight, easy reading. * I t can default auto power off or manual power off. * Data hold, record max. and min. reading. * Microcomputer circuit, high accuracy. * Power by UM3/ AA ( 1.5 V ) x 6 batteries or DC 9V adapter. * RS232/ USB PC COMPUTER interface. * Wide applications: PCB industries, water conditioning, aquariums, beverage, fish hatcheries, food processing, photography, laboratory, paper industry, plating industry, quality control, school & college, water conditioning.

Dat alogger Sampling Time Setting range
Memory Card Advanced set t ing
Data Hold Memory Recall Sampling Time of Display Data Output
Oper at ing Tem per at ur e Oper at ing Hum idit y Power Supply

GENERAL SPECI FI CATI ONS

Circuit

Custom one-chip of microprocessor LSI

cir cuit .

Display

LCD size : 52 mm x 38 mm.

Dot matrix LCD with backlight.

Measurement mT

milli Tesla

Unit

Gauss

Measurement

mT Range 1 300.00 mT x 0.01 mT

Range

Range 2 3,000.0 mT x 0.1 mT

( DC function ) G

Range 1 3,000.0 G x 0.1 G

Range 2 30,000 G x 1 G

Measurement

mT Range 1 150.00 mT x 0.01 mT

Range, AC

Range 2 1,500.0 mT x 0.1 mT

( AC function ) G

Range 1 1,500.0 G x 0.1 G

Range 2 15,000 G x 1 G

Accuracy

± ( 5 % rdg. + 10 digit )

( 23± 5 )

± ( 5 % rdg. + 20 digit )

Sensor

Hall sensor.

Frequency

AC measurement :

Response

50 Hz / 60 Hz

Temp.

Probe head build the Temp. sensor

Compensation for using the ATC ( automatic Temp.

for hall sensor compensation ).

Field Direction Uniaxial.

Power Current
Weight Dimension
Accessories I ncluded Opt ional Accessories

Auto 1 sec to 8 hour 59 min. 59 sec. @ Sampling time can set to 1 second, but memory data may loss.
Manual Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) no.
SD memory card. 1 GB to 16 GB.
* SD memory card Format * Set clock time ( Year/ Month/ Date,
Hour/ Minute/ Second ) * Set sampling time * Auto power OFF management * Set beep Sound ON/ OFF * Decimal point of SD card setting * Unit setting
Freeze the display reading. Maximum & Minimum value. Approx. 1 second.
RS 232/ USB PC computer interface. * Connect the optional RS232 cable
UPCB-02 will get the RS232 plug. * Connect the optional USB cable
USB-01 will get the USB plug. 0 to 50 .
Less than 85% R.H.
* AAlkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent.
* ADC 9V adapter input. ( AC/ DC power adapter is optional ).
Normal operation ( w/ o SD card save data and LCD Backlight is OFF) :
Approx. DC 14 mA. When SD card save the data and LCD Backlight is OFF) :
Approx. DC 37 mA. * AI f LCD backlight on, the power
consumption will increase approx. 12 mA. 489 g/ 1.08 LB. Meter 177 x 68 x 45 mm
(7.0 x 2.7x 1.9 inch) Probe 198 x 25 x 19 mm
( 7.8 x 1.0 x 0.7 inch ). * I nstruction manual……………………… 1 PC * Magnetic Probe………………………….. 1 PC * Hard carrying case ( CA-06 )………….1 PC * 1.413 mS Conductivity Standard
Solution………………………….. CD-14 SD memory card ( 2 GB ) AC to DC 9V adapter. USB cable, USB-01. RS232 cable, UPCB-02. Data Acquisition software, SW-U801-WI N. Excel data Acquisition software, SE-E802.