Dazzling Projector Lamp
Bluetooth Connection Instructions
- Turn on the machine
- Turn on Bluetooth function of mobile device (mobile phone, computer, etc.) and search for Bluetooth name “starlight”
- Click manually, the device will automatically match and connect, and a sound will be emitted if the connection is successful
- If the device has been paired successfully, it will be connected automatically when it is turned on next time
Product parameters
| Model | HR-Cl |
| Classification of lasers | Class 3R |
| Laser wavelength | 523nm |
| Nebula color | Colorful (controllable monochrome) |
| Shell material | ABS material |
| energy consumption | Less than 10W |
| input power | 100-240 vac 50/60Hz 150mA |
| Output Power | 5V Max.2A 8-10W CV |
| Operating temperature | 10 °C-60 °C degrees Celsius |
| Projection coverage | 550 feet |
| Product Size | 210mm x 100mm x113mm |
| Type-C length | 1M |
| Speaker power resistance | 5W40 |
| Bluetooth name | starlight |
CAUTION
This is not a toy. Young children must be supervised while using this device at all times. This unit is not waterproof. Use and store indoors or in a dry place.
CLEANING INSTRUCTIONS
Surface clean only with a soft, dry cloth. Unplug unit before cleaning.
DISPOSAL
At the end of its serviceable life. this product should not be treated s household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
