HATO H2
User Manual
H2 Wax Vaporizer Kit
YOU’RE ALMOST TO THE TOP!
We know it’s a drag,but please read through all the directions.This device is the first of its kind,and we’d like you to learn the easy way by reading this booklet.You’ll learn some secret tips and tricks as well!
WHAT’S INSIDE:
| A: Cotton swabs B: USB cable C: Glass Bubbler D: Carb cap* | E: Atomizer cover F: Atomizer G:0.96″TFT H: Button I: Base L: Loading Tool |
*Each glass piece is hand blown,and may vary slightly in size.
SPECIFICATION:
2800 mAh Battery
400E-750F Continuous Temperature Setting
Lightning Warm-Up (Red LED Marquee)
Ready (Vibration)
Working (7 colors LED rotation)
0.96″ TFT Digital Display
USB Type-C Charging
DIAGRAM:
QUICK START:
| STEP 1: Fully charge device before first use. Device pulses red while charging, and turns off automatically when complete. | STEP 2:Fill glass with water just above the air-holes.Do not fill glass while attached to base. X- Do not allow water in lower section! |
 |  |
| STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully push the front of glass into the base,then the back. | STEP 4: To lock/ unlock the device,quickly click the power button 5 times.The left and right key can adjust the temperature. |
 |  |
TEMPERATURE SETTINGS
 |  |  |
| STEP 5: Hold down to enter working mode Work can be stop by pressing the main key. Temp:400°F-750°F’ | STEP 6: Use cotton swabs to clean the coil. | STEP 7: When you replace atomizer,please turn off the device. |
BATTERY:
High power lithium battery.
WARRANTY
Please consult with HATOVAPE official distributors for their warranty and return policy. HATOVAPE warranty does not apply to products purchased through unauthorized vendors.
WARNINGS:
-Do not allow water in the bottom chamber of glass.
-Do not let water seep into the atomizer.
-Do not overfill glass.
-Do not store device with water in the glass.
-Remove glass before unscrewing and inserting atomizer.
-Attach / detach glass carefully,do not force.
-Wait I minute before using.
-Do not fire atomizer 4 times consecutively.
-Several short Inhales produce more vapor.
-Do not place contents on the sidewalls of the bowl.
-Do not overfill chamber.
-If you experience a bug, turn the device on and off. Should the issue persist, contact support.
-Keep away from extreme hot and cold temperatures.
-Keep away from moisture and high humidity.
Thanks For Your Reading
WWW.hatovape.com 
