Installation
| Hardware List | Hardware List | ||
 Table top | 1 |  Table leg | 4 |
 Short square beam | 2 |  Long square beam | 2 |
 8x16mm screw | 28 | | 4 |
 spare 4x15mm Self-tapping screws | 8 |  Hexagonal screw tap | 1 |
Washer1
First connect the beams with the legs, and then fix it with 8x16mm
2
- Put the table top on the table leg, make sure the reserved screw holes of the table top and the frame are corresponding, tighten 8x16mm screws to finish the installation.
- This is a spare screw hole. When the 8x16mm screw fails to be screwed in, the hole can be fixed with a 4x15mm self-tapping screw. Either way will do.
