CM-ACKG-02 Action-King 8 Inch Suction Mount Car Camera Rigging System

Action-King 8 Suction Mount Car Camera Rigging System
(CM-ACKG-02)

Assembly Manual

The Action-King 8 Suction Mount Car Camera Rigging System
(CM-ACKG-02) is a high-quality camera rigging system designed to
provide stable and secure mounting for your camera while capturing
footage in a moving vehicle. This rigging system includes:

• 2x 8” Suction Cup
• 3x 6” pipe with 48mm OD
• 2x Safety Straps
• Bolt and 5mm Allen Key
• Flight Case

Please inspect the contents of your shipped package to ensure
you have received everything that is listed above.

Product Usage Instructions

Suction Cup Setup

To ensure proper adhesion of suction cups, please follow these
guidelines:

1. Ensure both the cup surfaces and mounting surface are clean,
   dry, and dust-free.
2. Mount the suction cups on smooth, even, and non-porous surfaces
   only.

Mounting the Camera

Follow these steps to mount your camera on the Action-King 8
Suction Mount Car Camera Rigging System:

1. Attach the camera to the top of the rig using a compatible
   mounting plate or screw.
2. Attach safety straps to the rig and secure them to the
   vehicle.
3. Adjust the position of the rig as needed to achieve the desired
   shot.

Transporting the Rig

The Action-King 8 Suction Mount Car Camera Rigging System comes
with a flight case for safe transportation. Follow these steps to
pack the rig for transport:

1. Remove the camera from the rig and store it safely.
2. Disassemble the rig and store each component in its designated
   space in the flight case.
3. Securely close the flight case and transport it to your desired
   location.

Thank you for choosing the Action-King 8 Suction Mount Car
Camera Rigging System. For any further queries or assistance,
please refer to the user manual or contact our customer support
team.

1
Action-King 8″ Suction Mount Car Camera Rigging System (CM-ACKG-02)
Assembly Manual

What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

2x 8”Suction Cup

5 x 360° Rotating Speed Rail Clamp 2 x Washer

3 x 6” pipe with 48mm OD 2x Safety Straps Bolt and 5mm Allen Key

Flight Case

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.

2
· Press the hidden button on the bumper panel in the front of the vehicle, and remove it, as shown in the image.
· Insert a toe hook (Not included) into the hidden panel and tighten it correctly. NOTE: The toe hook’s purpose is to help you set up your setup easily.
6” pipe with 360° Rail Clamp Setup
· Loosen and remove the washer from the 6” pipe quickly with the help of a 5mm Allen key.
· Now, place one washer on the top of the toe hook such that their holes align with each other. Screw in the other washer from the bottom.
· Insert the washer screw into the 6″ pipe, then tighten them properly with the help of a 5mm Allen key.
· Now, loosen the 360° rotating speed rail clamp and attach one end to the 6″ pipe.

3
· Insert the rod (Not Included) into the other end of the speed rail clamp and tighten it correctly with the help of a 5mm Allen key.
Suction Cup Setup
To guarantee proper adhesion of suction cups, check that the cup surfaces & mounting surface is clean, dry & dust-free. Please mount it on smooth, even & non-porous surfaces.
· Place your suction cup in the selected position on the car surface. Next, press the suction pump to create a vacuum between the suction cup and the car surface. Finally, release the pump to mount the suction cup properly.
· Insert the 6″ pipe on the suction cup into one end of the 360° rotating speed rail clamp. Then, insert a rod (Not included) into the other end of the clamp.
· After inserting the rod, tighten the clamp properly with the help of a 5mm Allen key.
· Although the suction cup holding force is adequate for regular driving shots, you must use safety belts/tension straps for additional security. When mounted on cars, properly secure the objects attached to the suction cup (e.g. camera, gimbal, etc.). Use rubber sleeves to avoid dents and scratches on car paint. Tighten safety straps carefully to prevent damages.

4
· Your setup is ready to use. NOTE: Test all fixtures before driving .
YOUR PROAIM ACTION-KING 8″ SUCTION MOUNT CAR CAMERA RIGGING SYSTEM ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.