Contents hide
ACAM04BK Action Camera
User Manual
Preface
Thank you for purchasing the Nedis ACAM04BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is intended as a recording device.
The Nedis ACAM04BK is a small and lightweight action camera that enables you to make HD images and video.
The product is not fireproof or waterproof.
The camera has a waterproof housing for indoor and outdoor use.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product | Action camera |
Article number | ACAM04BK |
Dimensions (l x w x h) | 60 x 31 x 41 mm |
Battery capacity | 400 mAh |
Memory | MicroSD card (2 – 32 GB) (not included) |
Camera lens | Viewing angle = 100 degrees |
Image format | .jpg |
Image resolution | 0.3 MP – 5 MP |
Video format | .avi |
Video resolution | 640 x 480 px – 1280 x 720 px |
Frame speed | 30 fps |
Recording time | ≥ 1.5 hours |
Display | 2.0 LTPS |
Current | Standby: 170 mAh Working: 190 mAh |
Charging time | 3 hours |
Main parts (image A)
 |
A |
1. OK button |
2. Power indicator LED |
3. Power button |
4. Camera lens |
5. UP button |
6. DOWN button |
7. Speaker |
8. Display |
9. Charging indicator LED |
10. Status indicator LED |
11. Battery cover |
12. Microphone |
13. Micro USB port |
14. MicroSD card slot |
Additional parts (not shown in illustration)
15. Battery |
16. Waterproof housing |
17. Mounting accessories |
18. Bandages |
19. Micro USB cable |
20. 3M mats |
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Unplug the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Do not dismantle, open or shred secondary cells or batteries.
- Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
- Do not short-circuit a cell or a battery.
- Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
- Do not subject cells or batteries to mechanical shock.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Do not use any charger other than that specifically provided for use with the equipment.
- Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
- Do not leave a battery on prolonged charge when not in use.
- After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
- Disconnect the power supply before making or breaking the connections to the battery.
- The charger must only be plugged into an earthed socket-outlet.
- During charging, the battery must be placed in a well-ventilated area.
- Always purchase the battery recommended by the product manufacturer for the product.
- Do not remove a cell or battery from its original packaging until required for use.
- Do not use any cell or battery which is not designed for use with the equipment.
- Use only the cell or battery in the application for which it was intended.
- Do not mix cells of different manufacture, capacity, size or type within a product.
- Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
- Battery usage by children should be supervised.
- Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.
- When possible, remove the battery from the product when not in use.
- Properly dispose of the empty battery.
- Seek medical advice immediately if a cell or a battery has been swallowed.
Explanation of the symbols on the product or packaging
Icon | Description |
 | Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment. |
 | Indication that the producer of the packaging material complies with the Packaging Law and has contributed to the costs of the ‘Green Dot’ waste separation and recycling system. |
 | Indication to explain that the product can be recycled. |
 | This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment. |
 | Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin. |
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Insert or change memory card (image B)
A microSD card (not included) is required to take pictures or videos. Insert the microSD card into the microSD card slot A14.
 |
- Use a microSD card with a maximum of 32 GB storage capacity.
- Format the microSD card before use.
Charging the product (image C)
 |
- The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
- Charge the camera from any USB outlet with the supplied micro USB cable. The camera can be charged while recording video. Fully charging the battery takes about 3 hours.
- When battery level is low, a low battery notification is shown on the screen and the camera turns off.
Use
Switching on the product
Hold the power button A3 for about 3 seconds until the status indicator LED A10 lights up blue. A welcome screen appears, and the camera enters video mode.
Switching between modes
 |  | Video mode |
 | Picture mode | |
 | Playback mode | |
 | Setup mode |
- Switch between modes by pressing the power button A3.
Record pictures and video images
- In video mode, press OK to start or stop recording video.
- In picture mode, press OK to take a picture.
Maintenance
- Disconnect the product before cleaning.
- Before cleaning and maintenance, switch off the product and disconnect the power.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not clean the inside of the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
| This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment. |
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product ACAM04BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
