TOPB001897 2-Drawer Grey Nightstands Organizer End Table Storage Unit Bedroom
Product Information
The product is a piece of furniture that requires assembly. The
user manual provides instructions for assembling the product. It is
important to read each step carefully and ensure that the steps are
followed in the correct order to avoid any difficulties during
assembly. The product includes hardware components, which are
listed in the manual, along with their quantities. The manual
advises against using power tools to assemble the furniture to
avoid scratching or damaging the parts. The manual also provides
care and maintenance advice to extend the life of the
furniture.
Hardware Components
- 1pc x Component 1
- 1pc x Component 2
- 1pc x Component 3
- 4pcs x Component 4
- 8pcs x Component 5
- 4pcs x Component 6
- 1pc x Component 7
- 2pcs x Component 8
- 2pcs x Component 9
- 2pcs x Component 10
Care and Maintenance Advice
To extend the life of the furniture, it is best to keep it in a
climate-controlled environment and away from direct sunlight, as
extreme temperature and humidity changes can cause fading, warping,
shrinking, and splitting of wood. Proper care and cleaning at home
are also important to maintain the furniture’s condition as it
ages.
Product Usage Instructions
- Before starting assembly, ensure that all parts are included
and labeled or stamped on the raw edges. - Work in a spacious area, preferably on a carpet close to where
the unit will be used. - Keep handtools close at hand and avoid using power tools to
avoid scratching or damaging the parts. - Follow the assembly instructions carefully, ensuring that each
step is followed in the correct order. - Do not tighten the screws until assembly is completed.
- After assembly, keep the furniture in a climate-controlled
environment and away from direct sunlight to avoid damage from
extreme temperature and humidity changes. - Proper care and cleaning at home will extend the life of the
furniture. Follow the care and maintenance advice provided in the
manual.
USER’S MANUAL
Before You Start
Assemble Instruction
Attention : Do not tighten the screws until
you have completed assembly
Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the handtools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Hardware inside
1 1pc
2 1pc
3 1pc
4 4pcs
NYNN NYNN
5 8pcs 6 4pcs 7 1pc
8 2pcs
9 2pcs 10 2pcs
2
3
PRODUCT ASSEMBLY
STEP 1
4 4pcs
NYNN
5 8pcs 7 1pc
5
2
5
4
4 1
5 5
5 5
4
4
5 5
4
PRODUCT ASSEMBLY
STEP 2
NYNN
3 1pc 6 4pcs 7 1pc
3
3
6 6
6
5
PRODUCT ASSEMBLY
STEP 3
8 2pcs
9 2pcs 10 2pcs
8 8
9 8
10 8
PRODUCT ASSEMBLY
STEP 4
6
7
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
8
9
