QWOGJ003 Small Monkey Dual Light Source Flashlight
Product Information
The HOTO Self-Inflating Mattress comes with an inflation pump, a
pillow, and an outer cover for the air pump. The air pump has a
pump body, handle, power switch, air discharge port, air jet
accessory, inflation port, Type-C charging port, and lock catch.
The mattress has a two-way air hole and the pillow has an inflation
hole. The air pump can be used to inflate the mattress, pillow, and
other air products like swim rings. The product is not suitable for
children aged 3 years and under.
Product Usage Instructions
Inflating the Mattress
- Find a flat space larger than 200 x 150 (CM).
- Unfold the inflatable bed on a flat surface.
- Open the outer cover of the air pump.
- Press the air pump switch to start inflating the mattress.
- Turn off the switch directly after the airbed is fully
inflated. - Put the air pump back and cover it with the outer cover.
Inflating the Pillow
- Push the lock catch outwards and flip open the outer cover of
the air pump. - Lift up the handle and pull out the inflation pump.
- Connect the air jet in the middle to the inflation port of the
air pump. - Align the air jet to the pillow inflation hole.
- Turn on the air pump switch and inflate the pillow.
- Turn off the switch directly after the pillow is fully
inflated. - Put the air pump back and cover it with the outer cover.
Air Discharge Instructions
- Open the quick discharge valve to discharge the air naturally
first. - Push the lock catch outwards and flip open the panel of the air
pump. - Lift up the handle and pull out the inflation pump.
- Attach the air jet kit to the air discharge port and connect
the other end of the jet to the discharge valve. - Switch on the air pump to extract air.
- Turn off the switch directly after the air discharge.
- Put the air pump back and cover it with the outer cover.
Air Pump Charging
- When the air pump is in low power, the indicator light will
automatically turn red. - Connect the charger with the Type C charging cable delivered
with the pump to charge the pump. - When charging, the indicator light is in red; when full, the
indicator light is in green. - Disconnect the charger promptly after a full charge.
Troubleshooting
- If the air pump doesn’t work, charge it to solve the
problem. - If the inflation slows down, check the air inlet for foreign
objects or low battery power. - If the fan impeller doesn’t work, check whether the impeller is
stuck and plug it in the charger to check whether the battery has
power.
Safety Warnings
Safety Precautions
Follow the instructions in this User Guide to use this product
properly. Do not disassemble this product. Only authorized
repairmen are allowed to repair this product.
Warnings
- The product is not applicable to children aged 3 years and
under. - When the air pump is in continuous use for more than 5 minutes,
it should be cooled down for 10 minutes before it can be used
again. - Don’t insert foreign objects into the inflation port, discharge
port or charging port.
01 Product Introduction
Please carefully read this Guide before using the product and keep it properly. Thanks for using HOTO Self-Inflating Mattress.
1
2
Inflation pump 1 2 3 4
5 3
6
1 Pillow
4
2 Mattress
7
5
3 Two-way air hole
4 Air pump
5 Air discharge port
1
8
9
1 Pump body 2 Handle 3 Power switch 4 Air discharge port 5 Air jet accessory 6 Inflation port 7 Type-C charging port 8 Outer cover of air pump 9 Lock catch
02 Instructions
Inflating the mattress Find a flat space larger than 200 x 150 (CM) Unfold the inflatable bed on a flat surface Open the outer cover of the air pump and press the air pump switch
Inflating the pillow Push the lock catch outwards, and flip open the outer cover of the air pump Lift up the handle and pull out the inflation pump Connect the air jet in the middle to the inflation port of the air pump Align the air jet to the pillow inflation hole Turn on the air pump switch and inflate the pillow Turn off the switch directly after the airbed is fully inflated, put the air pump back and cover it with the outer cover
Air discharge instructions Open the quick discharge valve to discharge the air naturally first Push the lock catch outwards, and flip open the panel of the air pump Lift up the handle and pull out the inflation pump Attach the air jet kit to the air discharge port and connect the other end of the jet to the discharge valve Switch on the air pump to extract air Turn off the switch directly after the air discharge, put the air pump back and cover it with the outer cover
2
3
Air pump charging
When the air pump is in low power, the indicator light will automatically turn red Connect the charger with the Type C charging cable delivered with the pump to charge the pump When charging, the indicator light is in red; when full, the indicator light is in green Disconnect the charger promptly after a full charge
Additional Functions
In addition to inflating the inflatable sofa, the inflation pump can also be fitted with the complimentary air jet accessory to inflate other air products such as swim rings.
Air discharge
Inflation
Troubleshooting
If the air pump doesn’t work, the light will be always on, indicating that the power is low, and charging the pump can solve the problem
If the inflation slows down, please check the air inlet for foreign objects or low battery power
If the fan impeller doesn’t work, please check whether the impeller is stuck
Plug it in the charger to check whether the battery has power
4
03 Safety Warnings
04 Basic Parameters
Safety precautions
Proper use Please follow the instructions in this User Guide to use this product properly.
Repair service Do not disassemble this product. In order to avoid safety accidents, only authorized repairmen are allowed to repair this product.
Instructions for use
1. To avoid melting or burning of the inflatable bed, keep away from direct fires, heaters and other hot substances, and don’t smoke on or near the inflatable bed; 2. This product is not a life-saving device or a water toy and should not be used on water; 3. To avoid damage to the inflatable bed and your health, don’t stand, walk, jump or play on the inflatable bed; 4. To avoid puncturing the inflatable bed, don’t place it on corrosive surfaces, and avoid contact with sharp objects; 5. After the first inflation of the inflatable bed, the material will stretch a lot, leading to an illusion that the mattress is leaking, and you need to inject more air into the mattress to stabilize and firm the airbed.
Warnings
1. This product is not applicable to children aged 3 years and under, as they may suffocate in a face down position or when trapped in the gap between the air sofa and adjacent furniture or walls, which may be severer if the inflatable sofa is under-inflated during use. 2. When the air pump is in continuous use for more than 5 minutes, it should be cooled down for 10 minutes before it can be used again. 3. Don’t insert foreign objects into the inflation port, discharge port or charging port.
Product modeQWOGJ004 Product dimension2000×1500×250mm Air pump dimension94×83×102mm Product net weightAbout 6.4kg Executive standardsGB/T 28481-2012GB 4706.1 Battery type: Lithium-ion battery Battery capacity: 2000mAh Charging time: About 240min Inflation time: About 3min
05 Warranty Instructions
Warranty terms HOTO Self-Inflating Mattress is provided with after-sales warranty services of repair, replacement and refund in strict accordance with the Law of the People’s Republic of China on the Protection of Consumer Rights and Interests and the Product Quality Law of the People’s Republic of China, as detailed as follows:
5
6
·If this product has any fault listed on the Fault List of HOTO Self-Inflating Mattress and the fault has been tested and confirmed by Qiwai’s After-sales Service Center within 7 days from the date following your signature for receipt, you will be refunded or can replace the product free of charge.
·If this product has any fault listed on the Fault List of HOTO Self-Inflating Mattress and the fault has been tested and confirmed by Qiwai’s After-sales Service Center within 8 to 15 days from the date following your signature for receipt, you can replace the product or get it repaired free of charge.
·If this product has any fault listed on the Fault List of HOTO Self-Inflating Mattress and the fault has been tested and confirmed by Qiwai’s After-sales Service Center within 12 months from the date following your signature for receipt, you can get it repaired free from of charge.
HOTO Self-Inflating Mattress Fault List
Name
Faults
HOTO Self-Inflating Mattress
1. Charging failure in the air pump
2. The battery indicator light is not on when charging the air pump
3. The switch button of the air pump cannot be used
7
No warranties
Unauthorized maintenance, misuse, collision, negligence, abuse, filling, accidents, alterations or improper use of accessories not of this product, or tearing or alteration of labels or false proof marks. The validity of after-sales warranty services of repair, replacement and refund has been exceeded. Damages due to force majeure. Failure to meet the Fault List of HOTO Self-Inflating Mattress. Faults of this product or accessories due to man-made reasons although they are listed on the Fault List of HOTO Self-Inflating Mattress.
Indication
Please keep the packing case for at least 30 days after your signature for receipt since the packing case is used during transportation to ensure transportation safety.
This product is available only in China (excluding Hong Kong, Macao and Taiwan), so after-sales services are provided for it only in China (excluding Hong Kong, Macao and Taiwan). This Warranty Terms shall apply only to China (excluding Hong Kong, Macao and Taiwan).
Service hotline: 400-021-8696 Manufacturer: Shanghai Qiwai Culture Technology Co., Ltd. Address: Building 45, 50 Moganshan Road, Putuo District, Shanghai
8
