Fluke 2052r Wire Tracer Receiver Instruction Manual

2052R Wire Tracer Receiver

Product Information:

The 2052R/2062R Wire Tracer Receiver is a device used for
tracing and locating wires. It is designed to work in conjunction
with the 2000T Wire Tracer Transmitter. The receiver is equipped
with a Smart SensorTM (2062R) that enhances wire detection
capabilities. The transmitter sends signals that can be detected by
the receiver, allowing users to trace wires accurately.

Product Usage Instructions:

1. Ensure that the 2000T Wire Tracer Transmitter is turned on and
   functioning properly.
2. Hold the 2052R/2062R Wire Tracer Receiver in your hand, with
   the sensor facing towards the area where you want to trace
   wires.
3. Move the receiver slowly and steadily along the suspected wire
   path.
4. Observe the receiver’s display screen or indicator lights for
   any changes or signals.
5. If the receiver detects a wire signal, it will provide visual
   or audible indications, such as a change in display readings or LED
   lights.
6. Continue moving the receiver along the wire path until the
   signal becomes stronger or more consistent.
7. Use the receiver’s sensitivity adjustment feature to optimize
   the detection based on the wire’s distance or signal strength.
8. If necessary, use additional tools like the J (2052R) tip
   sensor or breaker (2062R) to further narrow down the wire
   location.
9. Once the wire is successfully traced, mark or note its location
   for future reference.
10. After usage, turn off both the transmitter and receiver to
    conserve battery power.

Note: For enhanced wire detection capabilities, use the Smart
SensorTM (2062R) on the 2062R Wire Tracer Receiver. The sensor can
provide more accurate and reliable wire tracing results.

2052R/2062R
Wire Tracer Receiver
2000T
Wire Tracer Transmitter
www.fluke.com

2000T 1 GFI

2062R RECEIVER

RCD

TRA2N0S0M0T ITTER

GFI
RCD
RCD RCD

TRA2N0S0M0T ITTER

2000T
TRANSMITTER
PN 5517778 2/2023 ©2023 Fluke Corporation. All Rights Reserved.

2052R

2062R
0X K 1X J 2X M 3X Q

GFI

TRA2N0S0M0T ITTER

TRA2N0S0M0T ITTER

TRA2N0S0M0T ITTER

1X > 2X >

2
20T0RA0NTSMITTER

20T0RA0NTSMITTER
<1 s >2 s <1 s

3X > 3X > 3X >

1X > 2X >

SMART SENSORTM (2062R)

1

2

2062R RECEIVER

2062R RECEIVER

3
2062R RECEIVER

M (2052R) / BREAKER (2062R)

1X

2X

J (2052R) / TIP SENSOR (2062R)
90° 90°

1 m

2052R

2062R

2000T

TRA2N0S0M0T ITTER RECEIVER 2062R

2062R RECEIVER 2062R RECEIVER

References

• Fluke Corporation: Fluke Electronics, Calibration and Networks