Acoustic Audio by Goldwood LED Light Display Speaker
Specifications
- DIMENSIONS: 14 x 16 x 27 inches
- WEIGHT: 37 pounds
- POWER: 1000 Watts
- SPEAKER TYPE: Subwoofer
- MOUNTING TYPE: Plug Mount, Freestanding
Introduction
Use your Bluetooth LED speaker from Acoustic Audio by Goldwood both inside and outside (in dry weather). It’s ideal for DJs, house parties, block parties, tailgates, weddings, concerts, PA systems, and karaoke at home.
Any Bluetooth audio streaming device is compatible with this speaker configuration. Use any audio device with a common RCA or 3.5mm output if you wish to have your gadgets wired. You need a grounded wall plug that is US standard 110V. When you sing into the integrated mic, your lead vocals are broadcast on the speaker along with the music. Using your remote control, you can adjust the room’s lighting and audio from any location.
Almost any portable device can stream music via Bluetooth, or you can connect directly with an RCA or 3.5mm wire. Not a Bluetooth? No issue. No matter your wireless configuration, the music will still be pumping thanks to the FM radio that is incorporated into your speaker system. Any Bluetooth audio streaming device, a typical US 110V grounded wall socket, any audio device with a normal RCA, and a 1/4 inch mic output are all compatible with this setup. This sound equipment can be used for karaoke at home, live concerts, weddings, PA, house or block parties, your upcoming beach or tailgating party, or professional DJ events.
What’s in the Box
- Acoustic Audio by Goldwood AA15LBS powered Bluetooth speaker x 1
- Power cable x 1
- MP3 remote control x 1
- Speaker stand x 1
- Instruction manual x 1
Easy Bluetooth Connection
- Plug in the Speaker
- Press in the small grey button USB/SD/Bluetooth Input
- Turn on the Speaker
- Turn Line Level and Master Volume knobs to half way
- Press the Mode button to “BLUE”. Speaker will say, “Bluetooth Ready”
- Select the “LS” device and pair.
READY TO GO!
FOR A BRIGHTER LIGHT SHOW CRANK UP THE VOLUME!
Frequently Asked Questions
Yes, you can and to get the ultimate results it is advised to use two of them.
No, it uses only Bluetooth connection.
Use it just at 110. Standard socket.
To my understanding, it won’t be possible to use a Bluetooth microphone and music at the same time. However, we do give you a plug-in microphone.
They can be turned off but can’t be set to a specific color.
It must be manually turned on.
The power cord is about 6 feet long.
Yes, two of them can be paired together.
A wireless mic hub can be plugged into the speaker’s mic input.
Yes, it is.
The speaker must be connected to the power source at all times.
Yes, it can be used for karaoke.
No, it doesn’t.
When it comes to sound projection, this speaker is far superior to little portable ones. I’ve used it thus far on my wraparound porch, and no matter where I am, I can hear the music.
Acoustic loudspeakers, often known as acoustic suspension speakers, have sealed cabinets that are positioned for less bass distortion.
Ensure that you are simultaneously pushing and holding both buttons. You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.
The term “acoustics” describes the characteristics that govern a space’s capacity to reflect sound waves in a way that results in clear hearing. Additionally, it alludes to the study of sound in terms of its creation, manifestation, manipulation, transmission, and reception.
One end has the speaker cone’s center attached to it, and the moving coil drives that end back and forth. This cone’s edges are maintained in place by an airtight surround or suspension. The air around the cone is pushed and pulled as it moves, which causes sound waves—pressure waves in the atmosphere—to form.
