Acoustic Audio by Goldwood AA351B 2 Way High Performance
Specifications
- CONNECTIVITY TECHNOLOGY: Bluetooth
- SPEAKER TYPE: Outdoor
- BRAND: Acoustic Audio by Goldwood
- MODEL NAME: Indoor Outdoor 2 Way Speakers Black Pair
- RECOMMENDED USES FOR PRODUCT: Indoor, Outdoor
- FREQUENCY RESPONSE: 100Hz-20 kHz
- SENSITIVITY: 89dB
- IMPEDANCE: 8ohm
- MOUNTING TYPE: bookshelf
- PRODUCT DIMENSIONS: 4.3 x 4 x 6 inches
- ITEM WEIGHT: 1.75 pounds
- CONNECTIVITY TECHNOLOGY: Bluetooth
- SPEAKER TYPE: Outdoor
Introduction
These speakers are ideal for any situation or purpose because they can survive any weather conditions and are water-resistant. There is no need to be concerned about corrosion or wear and tear because they were made with durability in mind. Use them in your garage, by the pool, or on your patio or deck. They are also excellent additions to any home theatre system with surround sound, fit on any bookshelf, work with any PA system, and are fantastic in bathrooms and kitchens. Each speaker has a two-way design, a 125W RMS maximum power handling capacity, and two-way capability. Mounting brackets are included, enabling hassle-free installation in any area.
FEATURES
151
- Recommended Power: 20-600 Watts
- Frequency Response: 37Hz-20 kHz
- Efficiency/Sensitivity: 98dB at 1 watt 1 meter
- Impedance: 8 Ohm
- 4″ Silver CD Woofers with Butyl Rubber Surrounds
- 5″ Ferro Fluid Cooled Mylar Dome Tweeters
- Weather Resistant Design
- Quick Release Spring Loaded Wire Terminals
- Heavy Duty ABS Construction Sealed Cabinets
- Speaker Size (H x W X D): 7.5″ x 5.5″ x 5″
- Designed And Engineered in the USA
- Full Instructions, Mounting Brackets and Hardware included
- Available in black and white
251
- Recommended Power: 20-400 Watts
- Frequency Response: 37Hz-20 kHz
- Efficiency/Sensitivity: 99dB at 1 watt 1 meter
- Impedance: 8 Ohm
- 3-Way Design and Functionality
- 4″ Silver Poly Dynamic Woofers with Butyl Rubber Surrounds
- 2″ Mylar Dome Mid ranges
- 5″ Mylar Dome Tweeters
- Weather Resistant Design
- Quick Release Spring Loaded Wire Terminals
- Heavy Duty ABS Construction Sealed Cabinets
- Speaker Size (H x W X D): 7.4″ x 4.6″ x 4.1″
- Designed And Engineered in the USA
- Full Instructions, Mounting Brackets and Hardware Included
- Available in black and white
351
- Recommended Power: 20-500 Watts
- Frequency Response: 100Hz-20 kHz
- Efficiency/Sensitivity: 89dB at 1 watt 1 meter
- Impedance: 8 Ohm
- 2-Way Design and Functionality
- 3″ Poly Mica Woofers with Butyl Rubber Surrounds
- 5″ PEI Dome Tweeters
- Weather Resistant Design
- Quick Release Spring Loaded Wire Terminals
- Heavy Duty ABS Construction Sealed Cabinets
- Speaker Size (H x W X D): 6″ x 4.25″ x 4″
- Designed And Engineered in the USA
- Full Instructions, Mounting Brackets and Hardware Included
- Available in black and white
APPLICATIONS
- Surround Sound System
- Center Channel Surround Sound
- Home Theater System
- Multiple Room System
- Marine Audio
- Yards/ Decks
- Bookshelf Speaker
- Bathroom/ Kitchen
- Car Audio
- Industrial Sound System
- Pools/ Spas
WIRING THE SPEAKERS
Please turn off and unplug your system prior to making any connections. To wire your system, use a good quality speaker cable with polarity coding (usually identified with a marking on the cable). Use 16 gauge speaker wire for up to 40ft and 14 gauge speaker wire for more than 40 ft. Connect the positive lead of the speaker wire (indicated with”+”) to the red (+) speaker terminal. Connect the negative lead of the speaker wire to the black (-) speaker terminal. Connect the other end of the speaker wire to the respective inputs on the amplifier. See the diagram below.
First, connect the bracket to the wall using the wall screws and a drill. Once the bracket is secure, use the speaker screws to attach the bracket to the holes in the speaker. Screw tightly by hand leaving enough slack so the speaker may rotate. See the diagram below.
NOTE: Failure to properly install the speaker could cause injury from falling objects.
LISTENING TEST
Once you have connected your speakers, turn on your system and begin playback of material you are familiar with. Begin at low volume and increase to a comfortable listening level. The system should sound balanced with stereo sound. If the sound is distorted, check to make sure that the speakers have been correctly wired to your amplifier or receiver.
Frequently Asked Questions
a pair of speakers: rather than numerous different sources, it sounds like one source. Indoor/outdoor design: Offers a variety of installation possibilities. hardware and mounting brackets that can be adjusted. Permit easy installation. The frequency response between 90Hz and 20kHz guarantees accurate sound reproduction.
For the price, the Speakers offer excellent value and quality. We don’t have to worry about them being outside, and installation was simple. We absolutely enjoy viewing movies outside, and the sound quality is excellent.
Practically any amplifier, from a small, affordable stereo amp like the Lepai LP-2020TI to a potent multichannel amp made for multiroom audio systems, can power these speakers.
Depending on the speaker type, outdoor speakers may or may not require a receiver. An amplifier is already present in active speakers. An audio source and power source are the only things needed for operation. Passive speakers need external amplification, typically from an audio-video receiver, because they lack an internal amplifier.
Your speakers should be placed with their backs against a wall, fastened to substantial patio beams, or even up close to the ceiling overhang. These positions naturally increase volume and bass.
First, unpair your speaker from any connected audio devices. After that, to return the speaker to its factory settings, press and hold the Bluetooth and power buttons at the same time for more than three seconds.
Generally speaking, as long as they aren’t in contact with moisture, you can leave them in the cold. It would be great if you constructed some sort of shelter for outside speakers that are permanently installed to shield them from the elements. Your speakers won’t suffer permanent harm from the cold alone.
Place the volume control box outside and the receiver inside to connect outdoor speakers. Make sure you store your speakers in a protected spot. Allow sufficient distance from the ground and proper distance between the speakers while mounting them.
The Audio Return Channel (ARC) replaces the need for a separate composite audio or optical cable by connecting your TV and audio system with a single High Speed HDMI® cable.
If they are properly cared for and maintained, outdoor speakers may often last up to ten years. The temperature and humidity of the environment, sunlight exposure, closeness to water (including swimming pools), owner maintenance, and the caliber of the wiring, mounting hardware, and weatherproof sealing all have an impact on how long outdoor speakers last.
