X-BT-MR Stainless Steel Threaded Studs Threaded Studs and Standoffs
Product Information
Product Name: Hilti Threaded Studs
Model Number: X-BT-MR M6/10 SN 8, X-BT-MR W6/10 SN 8
Manufacturer: Hilti AG
Address: FL-9494 Schaan, Liechtenstein
Product Type: Threaded studs for connection of materials to
structural steel
Type Approval: Yes
Corrosion Resistance: Equivalent to Corrosion 316
Product Usage Instructions
- Use the threaded studs for connecting materials to structural
steel. - Ensure that the product is within a distance of 0-1km from the
intended application. - Refer to the Hilti Corrosion handbook or DFTM for additional
information on corrosion resistance. - Select the appropriate stud type based on the material and
application:
- X-BT-MR M6/10 SN 8: Suitable for use with SF BT 22-A, SF BT
18-A, DX 351-BT, M6 X-IG BT tools. Torque: 14.8 ft lb. - X-BT-MR W6/10 SN 8: Suitable for use with SF BT 22-A, SF BT
18-A tools. Torque: 14.8 ft lb.
- X-BT: Drill hole diameter should be 26.8 mm for SF BT 22-A and
SF BT 18-A tools. Drill hole diameter should be 25.7 mm for DX
351-BT and M6 X-IG BT tools.
required.
- SF BT 22-A, SF BT 18-A: Torque range should be between 16-20
Nm. - DX 351-BT: Torque should be 20 Nm / 14.8 lb-ft.
- M6 X-IG BT: Torque should be 20 Nm / 14.8 lb-ft.
- For X-BT-MR M6/10 SN 8: Maximum load capacity is 150 N.
21
Hilti AG FL-9494 Schaan Hilti-DX-DoP-008 ETA-20/1042
EAD 333037-00-0602 0672
Threaded studs for connection of materials to structural steel
TYPE APPROVED
0-1km
Hilti Corrosion handbook / DFTM
3
A4
Equivalent Corrosion
316 Resistance
X-BT-MR M6/10 SN 8 X-BT-MR W6/10 SN 8
0,5 mm / 0.02″
8 mm / 0.32″
5
0,5 mm / 0.02″
Use with
Tinst
X-NSD ¼” – X-IG BT
SF BT 22-A SF BT 18-A
DX 351-BT
X-BT ¼” 20Nm/
10 mm X-NSD ¼” –
M6 X-IG BT
14,8 ft lb 7/16″
W6
X-BT: 26.8 mm X-BT: 26.8 mm X-BT: 25.7 mm X-BT: 25.7 mm
SF BT 22-A SF BT 18-A
4
X-BT-MR M6/ W6
2259050-09.2022
7a
10b
Inclination gauge
5°
> 5°
3× DX 351 BT
7b
8
100x X-BT-MR
11 2-10 mm 5/ 64″ – 25/64″
100x
9
2×
10a Max.
+
Max.
200 N
6,5 – 6,7 mm
12A
12B
X-BT ¼”
11
1
20Nm /14.8 lb-ft
X-NSD xx
SF 6-A22 1 5
1
SF 6H-A22 1 5
SF 10W-A22 4 11
2
SF 8M-A22 4 11
SFC 14-A 2 11
Tinst = 16 – 20 Nm SFC 22-A 2 11
–
Min.
Min.
13
21
Hilti AG FL-9494 Schaan Hilti-DX-DoP-008 ETA-20/1042
EAD 333037-00-0602 0672
Threaded studs for connection of materials to structural steel
1
TYPE APPROVED
2
0-1km
Hilti Corrosion handbook / DFTM
3
A4
Equivalent Corrosion
316 Resistance
X-BT-MR M6/10 SN 8 X-BT-MR W6/10 SN 8
0,5 mm / 0.02″
8 mm / 0.32″
5
0,5 mm / 0.02″
Use with
Tinst
X-NSD ¼” – X-IG BT
SF BT 22-A SF BT 18-A
BX 3-BT
X-BT ¼” 10 mm M6 20Nm/ X-NSD ¼” – X-IG BT
14,8 ft lb 7/16″
W6
6
X-BT: 26.8 mm X-BT: 26.8 mm X-BT: 25.7 mm X-BT: 25.7 mm
SF BT 22-A SF BT 18-A
4
X-BT-MR M6/ W6
7 X-FG B3-BTG X-FG B3-BT M/W
8a
11b Inclination gauge
5°
> 5°
3×
BX 3-BT
8b
9
100x
X-BT-MR
100x
10
2×
150 N
11a Max.
4 3 2 1
+
Max.
Min.
4 3 2 1
–
Min.
12 2-10 mm 5/ 64″ – 25/64″
6,5 – 6,7 mm
13A
13B
X-BT ¼”
11
1
20Nm /14.8 lb-ft
X-NSD xx
SF 6-A22 1 5
1
SF 6H-A22 1 5
SF 10W-A22 4 11
2
SF 8M-A22 4 11
SFC 14-A 2 11
Tinst = 16 – 20 Nm SFC 22-A 2 11
14
