Keron Zelos Mechanic Gloves Instructions

Keron Zelos Mechanic Gloves

MODLE

As the gloves are adjusted to special purposes, the lengths may deviate from the requirements of EN ISO 21420:2020.

Instructions for use

Personal Protection Equipment Regulation (EU) 2016/425 and Regulation 2016/425 as brought into UK law and amended and is compliant with the above-mentioned harmonised/designed standards EN ISO 21420:2020 « For minimal risks only »

Risk assessment

Gloves to protect against mechanical action whose effects are superficial or non-extreme atmospheric exposure. The risk is limited to the standards and the protection levels for which the product is tested. While selecting equipment, the user should perform risk analysis based on the intended use and determine suitability based on the product’s test standards and protection levels obtained.

Usage

For donning, check the integrity of the glove and the picked size that fits the hand. For doffing, ease the glove of one hand before removing the second glove to reduce the risk of contamination.

Storage: 5 – 25 ºC, dry, dark

Further information and declaration of conformity by:

References

• Home - Kerbl UK Ltd
• Arbeit und Sicherheit - Albert Kerbl GmbH