017556 Work Gloves
Instructions
017556 Work Gloves
WARNING! Gloves shall not be worn when there is a risk of entanglement by moving parts of the machine. The durability of the gloves depends on how they are used. Always check that the gloves are in good condition before using them. Keep the gloves in a clean, dry, and ventilated place, free from moisture, dirt, mold, and , sunlight. Do not leave the gloves in contaminated condition if they are going to be reused. Remove as much as possible of any contamination from the gloves after using them. Dispose of in accordance with current legislation. The materials used are not known to cause allergies. If any reaction occurs discontinue use.
EU DECLARATION OF CONFORMITY!
Item number : 017556, 017552, 017553, 017554, 017555
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.
LATEX GLOVE WATERPROOF
Size 7,8,9,10,11
Conforms to the following directives, regulations and standards:)
| Directive/Regulation | Harmonized standard |
| PPE (EU) 2016(425 | EN ISO 21420:2020, EN 388:2016 A1:2018, EN 511:2006, EN 407:2020 Cat II |
EN 388:2016+A1:2018: 3 2 4 2 X EN 511:2006: X 2 X EN407:2020:X 2 XXXX
| The PPE is identical to the PPE which is subject of EU type-examination certificate No: | 0075/2169/162/0112210079 |
| Name and address of the notified not nvohed: | CTC, Parc Sc. T. Gam. -4. rue Herm. Frankel. 69367 Lyon Cedex 07. France. N80075 |
This product was CE marked in year) 22
Skara 2022-01-18
Maria Sihvonen Grahn B
BUSINESS AREA MANAGER
EN 388:2016+ Al:2018
X Product not assessed for this property.
EN 511:2006
| Water penetration after 5 min | No water penetration after S min |
X Product not assessed for this property.
EN 407: 2020
X Product not assessed for this property.
Item no. 017556
Jula AB
Box 363, SE-532 24 Skarawww.jula.com
Made in Pakistan
Notified body/Jednostka notyfikowana No. 0075:
CTC, Parc Sc. T. Garn. – 4, rue Herm. Frenkel 69367 Lyon Cedex 07, Franc
These gloves bear CE marking to demonstrate compliance with Regulation (EU) 2016/425 Personal Protective Equipment and meet the standards EN ISO 21420:2020, EN 388:2016+A1:2018, EN 511:2006, EN 407:2020.
