2954-572 Convertible Lamps for Pendant
INSTALLATION INSTRUCTIONS
Product Information
- Product Name: Convertible Lamps for Pendant/Semi Flush
Mount - Model Number: 2954-572
- Maximum Wattage Rating: 60 watts per bulb
- Candelabra Base Bulbs: 4 (not included)
- Candle Cover: CCV21058P-613
Product Usage Instructions
- Before starting the installation, shut off power at the fuse
box or circuit breaker box. - Remove the old fixture including the mounting hardware.
- Unpack the new fixture and lay out all the parts in a clean
area. Make sure not to misplace any small parts necessary for
installation. - For Pendant Installation:
a. Place cloth shade (G) and metal washer (E) over all thread
(H).
b. Determine the desired hanging height and thread rods (F1, F2,
and F3) to the all thread (H).
c. Screw canopy (C) onto rod (F1).
d. Pass the wires carefully through each rod as you assemble.For Semi Flush Mount Installation:
a. Place cloth shade (G) and metal washer (E) over all thread
(H).
b. Secure rod (L) onto all thread (H) and screw canopy (C) onto rod
(L).
c. Pass the wires through each part as you assemble. - Attach the mounting plate (A) to the junction box with mounting
screws (B). - Connect the electrical wires as shown in fig 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to the mounting plate (A) using the green screw provided. - Tuck the wire connectors neatly into the junction box.
- Slide canopy (C) over mounting plate (A) and secure with screws
(D). - Place candle covers (J) over sockets (I).
- Install four candelabra base bulbs up to 60 watts each or CFL
or LED equivalent in accordance with the fixture specification. Do
not exceed the maximum wattage rating. - Your installation is now complete. Return power to the junction
box and test the fixture.
INSTALLATION INSTRUCTIONS
Item#2954-572 (Convertible Lamps for Pendant) (New. 2021/08/18) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARATION (Fig. 1) 1. Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
in a clean area. Take care not to misplace any small parts
necessary for installation. 3. Place cloth shade (G) and metal washer (E) over all
thread (H). Determine the desired hanging height and
thread rods (F1, F2 and F3) to the all thread (H). Screw
canopy (C) onto rod (F1). Pass the wires carefully
through each rod as you assemble. 4. Attach mounting plate (A) to the junction box (not
included) with mounting screws (B) (Size: #8-32N*L0.5″).
The side of the mounting plate (A) with “GND” marked on
it and two convex points must face out.
CONNECTING THE WIRES (Fig. 2) 5. Connect the electrical wires as shown in fig 2, making
sure that all wire connectors are secured. If your junction
box has a ground wire (green or bare copper), connect
the fixture’s ground wire to it. Otherwise, connect the
fixture’s ground wire directly to the mounting plate (A)
using the green screw provided. 6. Tuck the wire connectors neatly into the junction box. COMPLETING THE INSTALLATION (Fig. 1) 7. Slide canopy (C) over mounting plate (A) and secure with
screws (D). 8. Place candle covers (J) over sockets (I). 9. Install (4) four candelabra base bulbs (K) up to 60 watts
each or CFL or LED equivalent (not included) in
accordance with the fixture specification–DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Fig. 1 Set#A-021-118DH -Mounting plate -Ground screw -Mounting screw*2
Rod# W30-1-66A*1(F1) W30-1-66A*2(F2) W30-H-66A*1(F3)
F1 F2 F3
H
A B C D
E G
K
Your installation is now complete. Return power to the
J
junction box and test the fixture.
I
Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Candle cover# CCV21058P-613
Fig. 2 FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Page: 1/2
LA-3480E
INSTALLATION INSTRUCTIONS
Item#2954-572(Convertible Lamps for Semi Flush Mount) (New. 2021/08/18) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR
PREPARATION (Fig. 3) 1. Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
in a clean area. Take care not to misplace any small parts
necessary for installation. 3. Place cloth shade (G), metal washer (E) over all thread
(H). Secure rod (L) onto all thread (H) and screw canopy
(C) onto rod (L). Pass the wires through each part as you
go. Cut wire to leave 7” of wire after the canopy. 4. Attach mounting plate (A) to the junction box (not
included) with mounting screws (B) (Size: #8-32N*L0.5″).
The side of the mounting plate (A) with “GND” marked on
it and two convex points must face out.
CONNECTING THE WIRES (Fig. 2) 5. Connect the electrical wires as shown in fig 2, making
sure that all wire connectors are secured. If your junction
box has a ground wire (green or bare copper), connect
the fixture’s ground wire to it. Otherwise, connect the
fixture’s ground wire directly to the mounting plate (A)
using the green screw provided. 6. Tuck the wire connectors neatly into the junction box. COMPLETING THE INSTALLATION (Fig. 3) 7. Slide canopy (C) over mounting plate (A) and secure with
screws (D). 8. Place candle covers (J) over sockets (I). 9. Install (4) four candelabra base bulbs (K) up to 60 watts
each or CFL or LED equivalent (not included) in
accordance with the fixture specification–DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Fig. 3 Set#A-021-118DH -Mounting plate -Ground screw -Mounting screw*2
L
H
A B C D E
G
K J I
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig. 3) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Candle cover# CCV21058P-613 Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Page: 2/2
LA-3480E
