Aria Luxe No-see Receptacle Mount Installation Guide (+ PDF)

Contents hide

1 Luxe No-See Receptacle Mount

2 Product Information

3 Product Usage Instructions

3.1 Documents / Resources

3.1.1 References

Luxe No-See Receptacle Mount

Product Information

Product Name: No-See Receptacle Mount [Luxe]
Installation Guide: Included
Materials Needed:
- Pre-cut piece of surface material for Tray insert. *Size will
  vary depending on model.
- Bonding material (will vary depending on surface material)
- 4x self-tapping screws
- Stud
Components:
- Base
- Body
- Tray
- Door
Maintenance: Regular maintenance required
Patent Information: Available at www.ariavent.com/pages/patents
Country of Origin: Made in Canada

Product Usage Instructions

Disengage the Body from the Base by pushing firmly towards the
hinged walls’ innermost corner with the Door ajar.
Dry fit the Base into the wall and fasten it to the stud using
the provided pilot holes as necessary.
Apply silicone in the Tray and set the pre-cut Tray insert into
place. Allow time to cure.
Using the screws in the utility box, fasten the utility box to
the rear of the Body component.
To hardwire electrical, have an electrician repeat steps #1
& #5 to access the utility box.
NOTE: To easily open the Door, simply press
the side that has hinges. The Door will pop open!

View Fullscreen

No-See Receptacle Mount [Luxe] Installation Guide
Materials Needed
Pre-cut piece of surface material for Tray insert. *Size will vary depending on model.
Bonding material (will vary depending on surface material) 4x self tapping screws

Stud

Base

Body

Disengage Body from Base by pushing firmly towards the hinged walls’
innermost corner with the Door ajar.
3

Dry fit Base into wall. Fasten Base to stud using provided
pilot holes as necessary.
4

Tray

Apply silicone in Tray. Set pre-cut Tray insert into place.
Allow time to cure.
5

Using the screws in the utility box, fasten the utility box to the rear of
Body component.
Maintenance

Re-engage Body by aligning latches and pushing firmly towards the inner
corners opposite of the hinged Door.

To hardwire electrical, have an electrician repeat steps #1 & #5
to access utility box.

*NOTE* To easily open the Door, simply press the side that has hinges. The Door will pop open!

Patent Information
www.ariavent.com/pages/patents