ARIA Flush Device Mount Installation Guide
Device Installation
- Shut off circuit breaker and disconnect existing device from wall.
- Using dotted line on instruction guide, cut hole to allow Mount to be inserted.
- Optional: Use Smash Plate as guide, secure to wall using pins as a stamp.
- Feed wires through pre-drilled hole and place the Mount in the cavity
- Use drywall compund mud to cover flange. Once dry, sand. Repeat as needed.
- Paint to match surface
- Attach the unit to the Mount in the same manner as you would to drywall
- Connect device, turn on power and enjoy!
Pot Light Installation
- Drill hole in Mount according to the dimensions of the pot-light being used
- Secure Smash Plate to ceiling frame prior to drywall using nails or wood screws.
- Note the location of the cutout before installing the drywall. Install drywall and cut using the Smash Plate as a guide.
- Disconnect power and feed wires through ceiling and Mount
- Secure Mount using staples or drywall screws.
- Use drywall compund mud to cover flange. Enjoy!
- Connect wires and place components through hole. Individual pot-light install may vary
- Enjoy!
Aria Vent - Custom Vent Solutions
