BX7 Pro Anti-Mite Vacuum Cleaner

Product Information: BX7 Pro Anti-mite Vacuum Cleaner

The BX7 Pro Anti-mite Vacuum Cleaner is a versatile cleaning
device designed to effectively remove dust and mites from various
surfaces. It features advanced technology such as an LED display,
ultrasonic generator, hot air generator, and UV LED light. The
vacuum cleaner comes with a mini brush, power cord, MIF filter, and
a user guide.

Parts Name

LED display
On/Off button
Mode button
Brushroll cover latch
Brushroll cover
Brushroll
Ultrasonic generator
Hot air generator
UV LED light
Mini Brush
Power cord connector

Packing List

Name	Quantity
Anti-mite Vacuum Cleaner	1
Power Cord	1
MIF Filter	1
Mini-brush	1
User Guide	1

Product Usage Instructions

Note: Please follow these instructions for safe
and effective use of the BX7 Pro Anti-mite Vacuum Cleaner.

Use of the Product

When the LED display shows “brush trapped mode” and the icon
flashes, clean the filter and brushroll immediately.
The UV light only works within 3cm above an object and at less
than 30 degrees inclination. If not, the UV light will
automatically turn off.
Avoid touching the air outlet on the bottom of the machine to
prevent scalding.

LED Display

UV Mode
Vacuum Mode
Brush trapped Mode (The icon flashes when the dust is full or
brush trapped.)
Tap Mode
Dust concentration light (Indicates dust concentration
change)

Cleaning and Maintenance

Filters are available at authorized dealers. It is recommended
to clean the dust cup after each use. Clean and replace the filter
if necessary.

Dust Cup Cleaning

Turn off the machine and unplug the power cord. Press the
release button and lift upward to remove the dust cup (Figure
1).
Hold the dust cup and dust cup cover separately, twist the dust
cup lid anticlockwise to remove it from the dust cup for cleaning
(Figure 2 and Figure 3).

Filter and Cyclone Cleaning

Hold the cyclone in one hand and pinch the UP logo with the
other hand to take out the filter (Figure 4). Tap the filter
downward to remove any clogs (Figure 5).
Clean the cyclone metal filter with the attached mini brush
(Figure 6).
After cleaning the dust cup, filter, and cyclone, assemble the
cyclone into the dust cup. Rotate the dust cup cover assembly until
it clicks into place (Figure 7).

Note: Do not miss the filter. Use water or
neutral reagents to clean the dust cup and wipe with dry cloths. Do
not wash the filter unless necessary. Ensure the filter and dust
cup are completely dry before the next use.

Brushroll Cleaning and Installation

Turn off the machine and unplug the power cord. Rotate the
right lock knob anticlockwise to unlock position to remove the
brushroll for cleaning (Figure 8 and Figure 9).
After cleaning the brushroll, install it and the brushroll
cover back into the machine (Figure 10 and Figure 11). Lock the
latch of the brushroll.

Note: For safety reasons, always turn off the
machine and unplug the power cord before cleaning the
brushroll.

Maintenance and Storage

Clean the dust cup and filter after each use for further use. It
is recommended to replace the filter after 30-50 hours of working
time (depending on specific situations) for optimal
performance.

View Fullscreen

BX7 Pro

Anti-mite Vacuum Cleaner User Guide

Product Installation
Parts Name
LED display

On/Off button

Mode button

Brushroll cover latch

Brushroll cover Brushroll
Ultrasonic generator Hot air generator UV LED light

Mini Brush

Power cord connector

S A057419 JYT2

Packing List

Name Quantity

Anti-mite Vacuum Cleaner
1

Power Cord MIF Filter

Power cord

Mini-brush User Guide

Use of the Product
Insert the power cord into the machine and plug into the socket. Press on/off button,the machine is in vacuuming+UV+tapping mode and all indicators light up. Press the mode button to switch the machine to tapping+vacuuming mode. Press the mode button again to switch the machine to UV+vacuuming mode. Press the mode button again to switch back to the UV+tapping+vacuuming mode. Press on/off button again, the machine stop working(The LED display area has the dust sensor function. When in clean state, the dust concentration light turns blue. When in dirty state, the dust concentration light turns red. As the dust concentration decreases, the dust concentration light slowly changes from red to blue.)
Note: 1.When the LED display shows brush trapped mode and the icon flash, please clean the filter and brushroll in time. 2.For safety reasons, the UV light only works within 3cm above object as well as less than 30 inclination degrees. Otherwise, the UV light will automatically turn off. 3.Do not touch the air outlet on the bottom of the machine in case of hand scald.
LED Display
UV Mode

Vacuum Mode
Brush trapped Mode (When the dust is full or brush trapped, the icon flashes.)

Tap Mode
Dust concentration light (Indicate dust concentration change)

Cleaning and Maintenance
1 Note: 1.Filters are available at dealers. 2.It is recommended to clean the dust cup after each use. When the filter is blocked due to excessive dust accumulation, it needs to be cleaned and replaced if necessary.
Dust Cup Cleaning
1.Turn off the machine and unplug the power cord. Then press the release button and lift upward. (Figure 1)

Release button

2.Hold the dust cup and dust cup cover separately, twist dust lid anticlockwise (Figure 2), remove it from dust cup to clean. (Figure 3)

2 Dust cup
lid

3
Cyclone

Filter and Cyclone Cleaning

Hold the cyclone in one hand, pinch the “UP” logo with the other hand, and take out the filter (Figure

Dust cup

4). Please tap the filter downward.Do not tap the filter in reverse side in case of filter clog(Figure 5). 4 Clean the cyclone metal filter with the attached

Marking

ribbon

mini brush. (Figure 6)

MIF filter

After cleaning the dust cup, filter and cyclone,

assemble the cyclone into the dust cup. Rotate

the dust cup cover assembly into the dust cup

until a “click” sound is heard that is assembled in

place. (Figure 7)

Note:
1.Do Not miss the filter! 2.Use water or neutral reagents to clean dust cup and wipe with dry cloths. Do not wash the filter until it is necessary. Make sure the filter and dust cup are completely dry before another use.

Cyclone metal filter

Mini-brush

Filter
Rotate dust cup lid

Brushroll Cleaning and Installation
Turn off the machine and unplug the power cord, rotate the right lock knob anticlockwise with hand from locked position to unlock position (Figure 8) to remove the brushroll to clean up. (Figure 9)
After brushroll cleaning,install the brushroll and the brushroll cover into the machine in turn(Figure 10) and lock the latch of the brushroll. (Figure 11)
Note: For safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.

Lock Unlock

10 Install
Brushroll assembly
Brushroll cover

9 Take out

Brushroll assembly
Brushroll cover

Unlock Lock

Maintenance and Storage

Please clean dust cup and filter after each use for further use. It is recommended to replace a filter after 30-50 hours of working time(depending on specific situation) for better use.

Dust sensor cover

Any paper, lead glass, plastic will greatly affect the effect of UV light. Please wipe and clean the UV tube regularly for better use.

Do Not touch the UV tube as dirt will affect UV light effect.

Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct sunlight or humid environment.

The dust sensor cover in the air duct need to be cleaned regularly to avoid affecting the transmission and reception of infrared signals. (Figure 12)

Cautions
Please read this instruction manual carefully before use and keep it properly for future use.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do Not unplug the power cord with humid hand in case of electric shock.
Cut the power source in maintenance or off-service.
Keep the power cord away from sharp objects and do not drag the cord to move the machine in case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as carbon, cigarette butts, sharp objects such as broken glass, corrosive liquids, flammable and explosive materials such as gasoline and alcohol. Otherwise it may cause product damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid places (such as bathroom, toilet, laundry room, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct sunlight in case of fire hazard.
Keep this product beyond the reach of special individual such as children without adult supervision.
Do Not operate this machine with suction port blocked in case of product damage.

The product has UV light, for safety reasons, Do Not look at the bottom of the machine when the power is on in case of ultraviolet rays harming. Do not apply this product to plants. Excessive use of UV may cause object damage. Do not sit on this product in case of personal injury and product damage. Do not remove the brushroll cover or force the cover outward when the machine is powered on for safety reasons. This product can ONLY use for cleaning of textiles such as mattresses, blankets, pillows, sofas, etc. If the power cord is damaged, please ask for professional help of the manufacturer and other professionals for safety reasons.
6

Trouble Shooting

Please check the following trouble points before go to the maintenance department.

Problems

Possible Reasons

Solution

Power cord is not firmly inserted.

Insert the power cord firmly.

Power failure No power on socket.

Check the socket.

Power switch not pressed.

Press the On/Off button.

Low suction power
UV light failure

Suction port clogged.

Clean up suction port.

Dust accumulation on filter.

Clean up the dust cup and filter.

Dust accumulation on cyclone.

Clean up cyclone.

The UV function is automatically off for safety reasons or weak reflection of object. The machine operates on the same position for a long time.
The machine is placed upright.

The UV function operates on the condition of less than 3CM height from the object. Move the machine forward and backward
Machine tilted no more than 30 degrees.

Sensor window is contaminate.

Clean the sensor window with a half-dry cloth.

UV light damage.

Contact after-sale service.

Automatically turned off

Dust cup full. Suction port clogged.
Filter blocked.

The machine will automatically turn off to prevent the motor under long operation. If the machine automatically turned off , please clean up the dust cup and filter, unplug power cord and reuse if after 2 hours.

Brushroll failure

Brushroll tangled with foreign matter. Belt broken.

Remove the cover and clean up brushroll according to user guide.
Remove the cover according to user guide and check the belt. If broken, contact after-sale to repair.

Note:If fault remains after adopting the following solutions, contact after sale service or local distributor immediately.

Product Specifications

Technical Parameter

Model Rated voltage Rated frequency Rated power

BX7 Pro 220V-240V~ 50Hz 700W

Circuit Diagram

UV Light Heater

Power Supply PCB

M1 Main Motor M2 Brushroll Motor

Left Infrared PCB

Main PCB

Right Infrared PCB

Ultrasonic Generator

On/off PCB

Manufacturer Information

Manufacturer Address

Kingclean Electric Co., Ltd
No.1 Xiangyang Road, Suzhou New District, Jiangsu Province 215009,China

Disposal
The machine, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of the machine into household waste!
Only for EC countries: According to the European Guideline 2012/19/EU, machine that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
Subject to change without notice.
Warranty Information
This product enjoys one year warranty for the machine, service starting from the date of purchase. Excluded from the guarantee is normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, damage, that can be attributed to external circumstances or caused by the batteries.

1L-02

jimmy technology
Contact us -we’ll get back within 1 business day.

Web:www.jimmyglobal.com Email:[email protected]