ZH-3M Commercial Pizza Oven Countertop

Electric Pizza Oven

Product Information:

The Electric Pizza Oven comes in two models, ZH-3M and ZH-1M.
The ZH-3M model has two mesh oven racks, while the ZH-1M model has
one mesh oven rack. The oven has a pizza stone measuring 400mm x
400mm x 13mm, a heating tube with a power of 220V/1000W
(110V/650W), and a lampshade with a heat lamp. It also has an
on-off switch, timer, thermostat, and indicator light. The oven is
220-240V and 50-60Hz compatible, with a power of 3KW for ZH-3M and
2KW for ZH-1M. The dimensions of the oven are specified in
millimeters and depend on the model.

Product Usage:

Before using the Electric Pizza Oven, read the user manual
carefully and retain it for future reference. The following
instructions should be followed:

Transportation and Storage:

The product should be handled with care during transportation to
prevent damage to the shell and internal components. The packaging
should be placed within a well-ventilated, non-corrosive gas
warehouse. Temporary storage during rain should be taken into
consideration.

Installation Notes:

Ensure that the supply voltage is consistent with the voltage
specified on the product nameplate. The oven should be placed on a
balanced surface, and there should be a distance of at least 10cm
from any objects on the left and right sides. On the back, there
should be a distance of at least 20cm from combustible materials
like bricks. Combustible materials like towels and clothing should
not be placed on top of the oven. The oven door should not be
opened during use.

Daily Checks:

Before and after use, check the machine status to ensure that it
is not tilted, the power lines are not aging, cracked or broken,
the control panel is not damaged, and there is no abnormal noise or
loss of control. Regular checks of the product can prevent serious
accidents from occurring. If there is a machine failure, stop using
it and notify professional and technical personnel for inspection
and maintenance.

Electrical Schematic:

The electrical schematic includes heating indicators, lighting,
and temperature settings. The installation location should not
store inflammable and explosive materials. The installation of the
product should be done by professional and technical personnel, and
electrical connection and installation should be done by those
holding an electrical operating permit to install.

Warnings:

Any modification, improper installation, adjustment, repair, or
maintenance may result in property damage or personal injury. Do
not store or use flammable or explosive gases, liquids, or articles
in the vicinity of this product. Must often carry out routine
inspections. Regular checks of the product can prevent serious
accidents from occurring. Feel the circuit and stop using the
machine if there is a failure. Notify professional and technical
personnel for inspection and maintenance as soon as possible.

Electric Pizza Oven

ZH-3M ZH-1M User’s Manual

Welcome to purchase and use our electric pizza oven! Give full play to the performance of this product, to reduce unnecessary losses and injuries, read the instructions carefully before use and retain for future reference.
This series of products is to absorb foreign and domestic benefits of the product of the same type of design is made, fashionable and vivid color, reasonable structure, convenient operation, fast heat up, good insulation properties, energy-saving advantages. This series of products baked pizza, uniform color, crisp and delicious, excellent flavor. The oven according to national standards GB4706.39-1997 “Household and similar electrical appliances – Safety for commercial electric grill and toasters special requirements” production.
WARNING!
1. Any modification, and improper installation, adjustment, repair or maintenance may result in property damage or personal injury. For adjustment or repair should be to contact the supplier by trained professionals.
2. For your safety, please do not store or use flammable or explosive gases, liquids or articles in the vicinity of this product.

New Gift of pizza oven:
ZH-1M: Mesh Oven Rack*1pc ZH-3M: Mesh Oven Rack*2pc
Have a nice day!

Maintenance of three-dimensional exploded view:

. Product Shape Structure:

1. pizza stone,400*400*13mm 2.heating tube,(220V/1000W (110V/650W 3.inside components 4.support place of pizza stone 5.downside support plate of heating tube 6.lampshade 7.Heat lamp 8.board that holds down cotton 9.Five cylinder terminal 10. left and right plate of machine 11.supporting leg 12.support plate of inside components 13.outside components 14. Cable head 15.power line 16.Before frame components 17.components of door 18.on-off switch 19.timer 20.Thermostat 21.indicator light

. Basic Parameters:

Name
Power (KW) Voltage (V) Frequency (Hz)
Dimensionsmm
Inner sizemm

Electric pizza oven ZH-3M 3 220-240 50 – 60
560 × 556×435 400 × 400 × 150

Electric pizza oven ZH-1M 2 220-240 50 – 60
560 × 556 × 270 400 × 400 × 150

Layers

2

1

Name
Power (KW) Voltage (V) Frequency
(Hz)
Dimensions mm
Inner size mm Layers

Electric pizza oven ZH-3M 1.95 110 60
560 × 556×435
400 × 400 × 150
2

Electric pizza oven ZH-1M 1.3 110 60
560 × 556 × 270
400 × 400 × 150
1

.Transportation and storage:

During transporting, the product should be handled with care, not upside down to prevent damage to the shell and internal. The packaging has a good product should be placed within the warehouse of a well-ventilated, non-corrosive gases. Need temporary storage should be taken when the rain measures.

.Installation Notes:

1. The supply voltage must be consistent with the supply voltage of the product nameplate. 2. The furnace should be placed on the balance left and right side of the left objects 10cm or more, on the back should be away from combustible material (such as brick, etc.) 20cm Or more. Work can not be placed at the top of combustible materials such as towels, clothing, etc.. 3. When used, can not open the door to pick and place items in order to

avoid danger (cut off the power). 4. The device temperature adjustment range between 50-350 , it is recommended that the normal use temperature of 200-300 ° C
. daily checks:
Before and after use to pay attention to check the machine status Before using the machine is tilted? Power lines are aging, cracked or broken? The control panel is not damaged? Is it heated? There is no abnormal noise or loss of control?
WARNING!
Must often carry out routine inspections. Regular checks of the product, can prevent serious accidents have occurred. Feel the circuit, and to stop using the machine failure. Notified as soon as the inspection and maintenance of professional and technical personnel.

. Electrical Schematic:

H1,H2,H3: Heating indicator HL: Lighting
(depending on the need to adjust themselves to the set temperature). 5. Near the installation location is not storage of inflammable and explosive materials. 6. The installation of the product should be invited to the professional and technical personnel to operate, are not free to make changes. 7. Electrical connection and installation of the furnace, should be invited to hold the electrical operating permit to install.

SPECIAL NOTE: WARNING! This product is a commercial machine by trained personnel. This product can not be demolished, and can not be modified, nor can tilt the installation. Demolition and conversion of this product will cause serious accidents have occurred. When cleaning, cut off the power, do not direct spray water to the product. Water conductivity, the product may cause an electric shock due to leakage. Do not pat the product or place heavy objects on the product, normal operation can cause equipment damage and dangerous. In the course of their work, front and rear, due to the high-temperature relationship, do not direct contact with the body inside and door by hand. prohibit the use of the product labeling other than the power supply power. Prohibit the use of the of the power supply does not meet safety standards.

ST1/ST2/ST3 Thermostat

S1: Switch

PT: Timer Switch

R1: Top heating tube

R2: Middle heating tube

S2:Switch of inner lighting R3: Bottom heating tube

Attention!
Occurrence of thunder and lightning, disconnect the power as soon as possible, to avoid lightning damage. Prohibit the use of hard, sharp objects to damage the body surface and the control panel. After use, disconnect the power. Circuit installation and maintenance must be carried out by a qualified professional engineering staff. If the power cord is damaged, to avoid danger, to be replaced by the manufacturer, or the

maintenance department or similarly qualified persons.
. Instructions:
1. Open the power switch, adjust the thermostat knob to the desired temperature, then adjust timer(must adjust thermostat and timer, then machine will start heating); 2.When temperature reaches the set temperature, you can start to bake Roast; When finish the pizza grilled, need turn off the power switch, opened the door to remove the pizza.
. Cleaning and Maintenance:

. The General Fault Diagnosis:

malfunction

reason

methods

1

Switch on the power supply, the indicator light is on, but the machine does not heat up

1.Thermostat damaged. 2.The heating tube burns out

1.Replace

the

temperature

controller

2. Replace theating

tube

Switch on the power

2

supply,

turn

the

thermostat, temperature

Thermostat malfunction

rise can not be controlled

Replace temperature controller

1. Before cleaning off the power to prevent the occurrence of an accident. 2. Work week after the wet towels available free of corrosive detergent scrub pizza plate, body surface and the power cord. Never use water to flush directly, prevent the water to penetrate the destruction of the electrical properties, resulting in electricity safety incidents. 3.When unused for long periods should be clean and placed in a well-ventilated, non-corrosive gases inside the warehouse.

3

Switch on the power supply, the indicator light is not on

Indicator damage

light Replacing indicator

an

1. Check the power

4

When the power supply is switched on, the indicator light is not on and heating tube not heated

1. The power

supply

is

abnormal.

2.The fuse blew

out

supply

and

connection cables to

ensure that the

power supply is

normal. 2.Replace

fuse

The fault projects for reference only, if failure occurs, stop using them immediately and notified as soon as the inspection and maintenance of professional and technical

personnel