STAND-VRH1B Black Vinyl Record Holder
Product Information: Black Vinyl Record Holder
The Black Vinyl Record Holder is a product designed to organize
and showcase your vinyl record collection. It includes two face
plates, four support bars, two magnets, and a foot pad. The product
is SKU STAND-VRH1B and comes with M6x25mm screws and a 4mm Allen
wrench. The product is manufactured by VIVO and comes with a
warning of tip-over hazard and choking hazard for small parts. The
product is not intended for children under three years of age and
requires adult supervision.
Product Usage Instructions:
- Assemble the support bars (B) to the face plates (A) using the
provided M6x25mm screws (S-A) and the 4mm Allen wrench (T-A). - Apply the magnets (C) to the top of the support bars (B) to
keep records in place. - Apply the foot pads (D) to the bottom of the face plates
(A). - The product is now ready to use to organize and showcase your
vinyl record collection.
If any parts are received damaged or defective, please contact
VIVO support at [email protected] or call 309-278-5303. The support
team is available Monday-Friday from 7:00am-7:00pm CST and has an
average resolution time of less than 15 minutes during office
hours.
Black Vinyl Record Holder
Instruction Manual
SKU: STAND-VRH1B
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-vrh1b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF STAND. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x2) Face Plate
B (x4) Support Bar
C (x2) Magnet
D (x1) Foot Pad
S-A (x8) M6x25mm Screw
TOOLS NEEDED
T-A (x1) 4mm Allen Wrench
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
Phillips Screwdriver
2
ASSEMBLY STEPS
STEP 1
Assemble Support Bars (B) to Face Plates (A) using M6x25mm Screws (S-A) and 4mm Allen Wrench (T-A).
A
B
S-A
T-A
STEP 2
Apply Magnets (C) to the top of Support Bars (B) to keep records in place. Apply Foot Pads (D) to the bottom of Face Plates (A).
A
B
C
D 3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 05/24/2021 REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Vinyl Record Holder – VIVO - desk solutions, screen mounting, and more
