Ekvip 022435 Led Icicle String Lights Instruction Manual

Ekvip 022435 Led Icicle String Lights Instruction Manual

EKVIP-logo

EKVIP 022435 LED Icicle String Lights

EKVIP-022435-LED-Icicle-String-Lights-product-image

SAFETY INFORMATION

Read the operating instructions carefully before use.
Please retain for future reference.

  • Do not connect the set to the mains while it is still in the pack.
  • The bulbs are not replaceable.
  • Do not connect this set to another set.
  • The power cord for this set is not replaceable, if damaged discard the complete product.
  • For indoor and outdoor use.
  • Warning: this set must not be used unless all the seals are in place.
  • This product must only be used together with a transformer with the same output as the one supplied and must never be connected directly to the mains supply.

TECHNICAL DATA

  • input voltage 31 VDC
  • Output 2,5 W
  • Bulbs 100
  • Protection rating IP44
  • Length of light string 300 cm
  • Width of light string 40 cm
PRODUCT INFORMATION SHEET
Supplier’s name or trademark:EKVIP
Supplier’s address (a):Jula AB, Box 363, 532 24 SKARA
Model identifier:022435
Type of light source:LED
Lighting technology used:LEDNon-directional or directional:NDLS
Light source connected to mains supply or light source not connected to mains supply: 

NMLS

 

Connected light source (CLS):

 

no

Colour-tuneable light source:noEnvelope:
High luminance light source:no
Anti-glare shield:noDimmable:no
Product parameters
ParameterValueParameterValue
General product parameters:
Energy consumption in on-mode (kWh/1000 h)3Energy efficiency classF
Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360˚), in a wide cone (120˚) or in a narrow cone (90˚). 

 

270 in sphere (360°)

Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set. 

 

2 700

On-mode power (Pon), expressed in W. 

2,5

Standby power (Psb), expressed in W and rounded to the second decimal. 

0,00

Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal. 

Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set. 

80

Outer dimensions without separate control gear, lighting control parts and non-lighting control parts, if any (millimetre).Height400 

Spectral power distribution in the range 250 nm to 800 nm, at full-load.

 

See image in last page

Width3 000
Depth
Claim of equivalent power (c)If yes, equivalent power (W)
 

Chromaticity coordinates (x and y)

0,468

0,418

Parameters for LED and OLED light sources:
R9 colour rendering index value20Survival factor1,00
The lumen maintenance factor0,96
Parameters for LED and OLED mains light sources:
Displacement factor (cos φ1)Colour consistency in mcadam ellipses5
Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage. 

-(b)

 

If yes then replacement claim (W)

 

Flicker metric (Pst LM)Stroboscopic effect metric (SVM)
 

(a) ”-”: not applicable;

(b) ”-”: not applicable;

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals