Legrand Le12093ac Arteor With Netatmo Connected Wired Light Switch Instruction Manual

LE12093AC Arteor with Netatmo Connected Wired Light Switch

Product Information

The product is a connected switch with a neutral wire and dimmer
option. It is part of the Arteor with Netatmo connected starter
pack, which needs to be purchased and installed separately. The
pack includes the connected switch and a gateway for general
control of leaving home and returning home.

In default operating mode, the switch works with LED bulbs that
operate at 110-240 VAC. The switch requires a 2 x 1.5 mm2 wire for
the neutral connection and a 1 x 2.5 mm2 wire for the live
connection. The maximum load capacity is 150 W (or 150 VA) for 240
VAC bulbs and 75 W (or 75 VA) for 110 VAC bulbs. It is recommended
to use bulbs of the same type and manufacturer for optimal light
comfort.

In dimmer option operating mode, which can be activated via the
App, the switch functions only with dimmable bulbs. Dimmable bulbs
can be identified by the logo on their packaging.

Before installation, it is important to follow wiring
precautions. Do not use two connected switches to control the same
lighting point. If installing a two-way light switch, additional
precautions need to be considered.

Product Usage Instructions

1. Turn OFF the power at the main circuit breaker before starting
   the installation.
2. Remove the existing switch.
3. Wire the connected switch according to the provided
   diagram.
4. If using the dimmer option, ensure that it is installed on the
   lamp side.
5. To add the connected switch to your connected installation,
   follow the instructions in the Legrand Home + Control application
   or consult the user manual on legrand.fr.

Additional notes:

• The connected switch with dimmer option can be managed by up to
  20 mechanical push buttons (not included in the pack).
• The connected switch works with standard or dimmable bulbs,
  including LED. However, for optimal dimmer usage, LED dimmable
  bulbs are mandatory.

For any further assistance or queries, refer to the user manual
provided with the product or contact the manufacturer, Legrand.

Connected switch with neutral (with dimmer option) 5 743 30/31/32/33/40/41/42/43
This product is a connected accessory which requires you to buy and install the Arteor with Netatmo connected starter pack first. Pack contents:

5 743 30/31/32/33
5 743 40/41/42/43 Connected switch with neutral (with dimmer option)

Gateway

Leave home/back home general control

Characteristics In default operating mode (on/off ), this switch works with the following bulbs:

+ 45° C + 5° C

LED

110-240 VAC 2 x 1.5 mm2

50/60 Hz

1 x 2.5 mm2

240 VAC

Max.

150 W

(*)150 VA

150 VA

150 VA

110 VAC

Max.

75 W

(*)75 VA

75 VA

75 VA

(*) Or 15 bulbs max. For a good light comfort, it is recommended to use bulbs of the same type and the same manufacturer.
In dimmer option operating mode (which can be activated via the App), this switch functions only with dimmable bulbs (identifiable by the logo on packaging).

LE12093AC

Before you start: wiring precautions Do not use: two connected switches to control the same lighting point.
If you plan to install a two-way light switches, read the following precautions:

Connected switch (with dimmer option)

Connected switch (with dimmer option)

x 1 AND

x 1 OR

AND

x 1 or several
Wireless controls for all control points (not included in this pack)

x 1 or several
Mechanical push button (not included in this pack)

Tip if replacing a two-way switch using a wireless control: old flush-mounted switch replaced by the wireless control.
Live

Use a connector to connect live wire and traveller wires 1 and 2.

Traveller 1

Neutral

Traveller 2
2

Necessary safety precautions

Switch OFF the power

at the main circuit

breaker

OFF

Make sure that the power is OFF before continuing with the installation.

Install the connected switch

Wire the connected switch
N L
7 mm

1 way

NL B

Remove the existing switch
Wire the connected switch

N L

50 m max.
Option: possibility to manage this switch (with dimmer option) by up to 20 mechanical push buttons (not equipped with locator/indicator light).
N (neutral) = blue L (live) = any except blue and green/yellow

7 mm

NL

B

Attention, the dimmer must be installed on the lamp side.
Frequency bands: 2.4 – 2.4835 GHz Power level: < 100 mW

The connected switch with neutral (with dimmer option) works with standard or dimmable bulbs including LED. LED dimmable bulbs are mandatory for an optimal dimmer usage.

3

To add a connected product to your connected installation, you should
follow the instructions: – in the Legrand Home + Control application (Settings/Add a new product section) – or consult the user manual on legrand.fr
www.legrand.fr/reference/574341 LEGRAND – Pro and Consumer Service – BP 30076 87002 LIMOGES CEDEX FRANCE · www.legrand.com
Safety instructions This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions complies with directive 2014/53/EU.
4

( ) 5 743 30/31/32/33/40/41/42/43
Arteor Netatmo . :

5 743 40/41/42/43

5 743 30/31/32/33

/

( )

: ( /)

LED

+ 45° C + 5° C

150 75

150 75

150(*) 75(*)

150

2 1,5 × 2 240-110

2 2,5 × 1

50/60

240

75

110

. . 15 (*) ( )
.( )
5

: . : :

( )

Connected switch (with dimmer option)

( )

( )

.2 1

: : .

1

2

6

.

N
L
7 mm

NL

B

N L

. 50
: ( )
20 .(/ )

7 mm

NL

B

,

2.4835 – 2.4 : 100 > :

= () N = ( ) L /

( ) LED .LED .

7

:
( / ) + Legrand legrand.fr –
www.legrand.fr/reference/574341 BP 30076 – – LEGRAND 87002 LIMOGES CEDEX FRANCE · www.legrand.com
: / .
. Legrand . .
.Legrand .
. Legrand
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions complies with directive 2014/53/EU.

References

• Legrand - Spécialiste des infrastructures électriques et numériques du bâtiment
• Welcome to Legrand - Legrand
• Résultats de votre recherche - particulier | Legrand