Nedis Spbb315bk Bluetooth Party Boombox Speaker Instruction Manual

Nedis Spbb315bk Bluetooth Party Boombox Speaker Instruction Manual

nedis logo

Portable Bluetooth® Boombox

with colour changing RGB LED party lights

SPBB315BK

nedis SPBB315BK Bluetooth Party Boombox Speaker

nedis SPBB315BK Bluetooth Party Boombox Speaker QR code 1

 

nedis SPBB315BK Bluetooth Party Boombox Speaker A
ned.is/spbb315bk

nedis SPBB315BK Bluetooth Party Boombox Speaker B

Quick start guide

nedis SPBB315BK Bluetooth Party Boombox Speaker AFor more information see the extended manual online:
ned.is/spbb315bk

Intended use

This product is intended to stream audio from your media device via Bluetooth®, audio cable or from a USB flash drive.
The product is not intended for professional use.
Consult the local laws and regulations for this product before installing and using.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications
ProductPortable Bluetooth® Boombox
Article numberSPBB315BK
Maximum battery play time (at 50% volume)Up to 6 hours / up to 3 hours (when lights on)
Maximum charging timeUp to 3.5 hours
Bluetooth® version5.0
Bluetooth® frequency range2402 – 2480 MHz
Maximum transmission power2 dBm
Peak audio output50 W (2 x 25 W)
Driver diameter2 x 76 mm
Impedance4 Ohm
Protection ratingIPX5
LED lightsYes
True Wireless Stereo (TWS)Yes
ConnectionsUSB Type-C™, AUX input, USB
Battery capacity3600 mAh
Battery typeLithium-ion
Charging input power5.0 VDC ; 2.0 A
Dimensions (l x w x h)144 x 354 x 187 mm
Weight2690g
Main parts (image A)

1 Battery indicator LED
2 True Wireless Stereo (TWS) button
3 Play / pause button
4 Volume down / previous track button
5 USB-C port
6 Power button
7 Mode button
8 Volume up / next track button
9 USB port
10 AUX input
11 3.5 mm audio cable
12 USB — USB-C charging cable

Safety instructions

nedis Wiring 1 WARNING

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
  • Only use the product as described in this document.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Disconnect the product from the power source and other equipment if problems occur.
  • Do not expose the product to water or moisture.
  • Do not immerse the product in water.
  • Do not charge when the product is wet.
  • Do not drop the product and avoid bumping.
  • Do not dismantle, open or shred batteries.
  • Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
  • Do not subject cells or batteries to mechanical shock.
  • Charge the battery for at least 3.5 hours when you use it for the first time.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • Disconnect the product from the electrical outlet and other equipment if problems occur.
  • The handle is exclusively intended to carry the weight of the product.
  • Only use the provided USB charging cable.
Charging the product

nedis Wiring i You can charge the product in two ways.

For charging via the power outlet:

  1. Plug the USB-C connector of the USB charging cable A 12 into the USB-C charging port A 5.
  2. Plug the other end of into a 5V/1-2A USB adapter (not provided).
  3. Plug the USB adapter into a power outlet.

The battery LED indicators A 1 start blinking to indicate that the product is charging.

nedis Wiring 1 The maximum charging time is up to 3.5 hours.
nedis Wiring 1 If the battery is fully charged, all four battery LED indicators A 1 stay lit white.
nedis Wiring 1 When the battery voltage is low, the product will emit a tone for recharging.

Playing music from a Bluetooth® audio source
  1. Press and hold the power button A 6 to switch on the product.
    nedis Wiring i The product emits a tone and A 6 blinks blue to indicate the product is switched on.
    The product automatically enters Bluetooth® mode.
  2. Activate Bluetooth on your audio source and connect with the product (SPBB315BK).
    The product emits a tone and A 6 stops blinking to indicate pairing is successful.
    nedis Wiring i [A][6] keeps blinking blue if Bluetooth® is not connected.
  3. Play music from a Bluetooth device.
Playing music through the audio cable
  1. Plug the 3.5 mm audio cable A 11 into the AUX input A 10.
  2. Plug the other end of A 11 into your audio source.
  3. Play music from your audio device.

nedis Wiring i Bluetooth® is deactivated when you use a different audio source.
nedis Wiring i Press and hold A 7 to reactivate Bluetooth’ mode.

Controlling the music
  1. Press and hold button A 8 or A 4 to skip between tracks.
  2. Press A 8 or A 4 to control the volume.
  3. Press A 3 to play or pause music.

nedis Wiring i You can also control the music and volume from your audio device.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SPBB315BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/SPBB315BK#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands

Nedis BV
De Tweeling 28, 5215 MC ‘s-Hertogenbosch
The Netherlands

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals