CH13C-R Remote Control
Product Overview
The CH13C-R is a remote control designed for use with a specific
product. It is model number CH13C-R and has an FCC ID of
2BA76CH13MNT003.
Environment Requirements
The remote control should be operated in an environment with a
temperature range of 0°C to 40°C and stored in an environment with
a temperature range of 10°C to 65°C. The operating humidity range
is 10% to 80% RH non-condensing, while the storage humidity range
is 10% to 85% RH non-condensing.
Directions for Operation
Pairing Remote
To pair the remote control with the product, unplug the product
from the power source, then press and hold the HEAD DOWN and FLAT
buttons simultaneously until the blue backlights of the remote
control turn off.
Adjustment
Use the ADJUST button on the remote control to adjust settings
on the product.
The ONE TOUCH button on the remote control can be used to
quickly access a specific function or setting on the product.
Underneath LED Lighting
The remote control features underneath LED lighting for easy
visibility and use in low-light environments.
Product Usage Instructions
- Ensure that the product is unplugged from the power
source. - Pair the remote control with the product by pressing and
holding the HEAD DOWN and FLAT buttons simultaneously until the
blue backlights of the remote control turn off. - Use the ADJUST button on the remote control to adjust settings
on the product. - Use the ONE TOUCH button on the remote control to quickly
access a specific function or setting on the product. - The remote control features underneath LED lighting for easy
visibility and use in low-light environments. - When finished using the product, ensure that it is properly
stored in an environment with a temperature range of 10°C to 65°C
and a humidity range of 10% to 85% RH non-condensing.
CH13C-R Remote Control Instructions
1. Product Overview
Product Name
Remote Control
Product Model No. CH13C-R
FCC ID:
2BA76CH13MNT003
2. Environment requirement Operation temperature: 0~ +40. Storage temperature: 10~65. Operating Humidity10%~80%RHnon-condensing. Storage Humidity10%~ 85%RHnon-condensing.
3. Directions for Operation 3.1 Pairing Remote Unplug the bed from the power source,then press and hold HEAD DOWN and FLAT Buttons simultaneously until the blue backlights of the remote control are off.
3.2 ADJUST:
3.3 ONE TOUCH BUTTON:
3.4 UNDERNEATH LED LIGHTING
4. Matters needing attention 4.1 The function will only work normally in proper working power conditions. 4.2 Remote Control needs three AAA batteries. 4.3 The control box is needed for proper control. 4.4 If problems are identified, they must be treated by professional personnel. 5. Additional attention for user 5.1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/ TV technician for help. 5.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5.3 For Intentional and unintentional radiators the manual shall caution the user and manufacturer that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
