FOERSTER TECHNIK 4.1 MilchMobil
FOERSTER TECHNIK 4.1 MilchMobil
MilchMobil
This document gives you a brief overview about how to Start up a MilchMobil.
Unlock
Operational modes
SET
Setting mode, when the MilchMobil is connected to the mains.
AUTO
Feed mode, when the MilchMobil is disconnected from the mains.
- Filling the water bathSlightly tilt the MilchMobil
- Plug in & turn on Charge the battery 6-8 hours
- Cleaning Once before commissioning & after each feeding
Attention! First insert the cleaning nozzle loosely into the opening provided, then attach dosing arm to it. - Heating adjustment
Note: Set frost protection - Calibration
To ensure that the dosing pump can exactly dose the specified amount of water, you must perform a cali- bration during commissioning. Keep a measuring cup ready for calibration.
- Dosing
3 options
This checklist refers to the basic equipment of the MilchMobil. Not all available functions can be shown. For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)
