P1 4G Bonding SDI Video Encoder
Product Information:
Product Name: P1 4G Bonding Video Encoder
Features:
- High integration, portable, low consumption, high
performance - Built-in dual 4G-LTE modems
- IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model
- Professional SDI H.264/AVC encoder
- Built-in lithium battery with a battery life of 3 hours
- Supports up to 1080p60 Full HD video encoding
- Enables up to 960×540@60Hz sub-stream encoding
- Very low power consumption
Product Usage Instructions:
- Connect the P1 4G Bonding Video Encoder to a power source using
the provided USB cable. - Ensure that the lithium battery is fully charged before
usage. - Press and hold the power button located on the device to turn
it on. - Wait for the device to boot up and establish a stable
connection with the built-in dual 4G-LTE modems and WI-FI. - Connect an SDI source to the P1 using an SDI cable.
- Configure the video encoding settings according to your
requirements. The P1 supports up to 1080p60 Full HD video encoding
and enables sub-stream encoding at 960×540@60Hz. - To start encoding, press the appropriate button or follow the
on-screen instructions. - The encoded video can be transmitted over the 4G network or
streamed over the WI-FI connection. - Monitor the encoding process and adjust the settings if
necessary. - After usage, press and hold the power button to turn off the P1
4G Bonding Video Encoder.
P1
4G Bonding Video Encoder
Built-in dual 4G, Wifi, professional SDI H.264/AVC encoder Powered by lithium battery, Battery life is 3 hours
Product overview
P1 is a professional HD/3G-SDI H.264 video encoder, designed for outdoor broadcaster, applied in video image transmission. Small size and ultra-low consumption design! It supports up to 1080p60 input. Input SDI signal through preceding image processor for image enhancement, then encoding by SOC processor for creating H.264 video encode featured with high performance and low bit rate. P1 supports unbind audio from SDI signal, also input audio from Analog Line-in for AAC (MPEG4Audio) stereo audio encoding or G.711 audio encoding. Built-in Kiloview Sunshine streaming media server engine is a server with the ability of supporting 20-50 concurrent users access simultaneously. P1 built in battery can support working 3 hours. And users can prolong working time with the help of mobile power bank. Easy operation and convenient! P1 is equipped with bracket and hot shoe screw, fixed well on the camera. Button design between bracket and camera makes device disassemble very easily.
Features
High integration, portable, low consumption, high performance
P1, small size of 115mm*75mm*35mm, integrates FPGA, video co-processor and video encoding chip. It is built-in two 4G-LTE modems, IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model and built-in lithium battery. P1 can support up to 1080p60 Full HD video encoding, meanwhile enabling up to 960×540@60Hz sub-stream encoding. Very low power consumption. Under typical case by opening dual 4G modules, overall power consumption is <=6.5W. Matched up with 6800mAh lithium battery can work for 3 hours.
Low bit rate assuring nice image and quality audio
P1 adopts VLB (Very Low Bit Rate) H.264 video encoding technology, bonding with preceding video processor to do video dynamic noise reduction, image enhancement, etc.. Generally, 1Mbps@720p, 1.5Mbps@1080p can achieve good video encoding quality, which meet needs of low bit rate and quality image under internet applications.
Support Wi-Fi and 4G-LTE
P1 has built-in two 4G-LTE modules, working with SIM card. It supports bonding work of multiple 4G-LTE modules to enhance bandwidth and improve transmission reliability. P1 also supports built-in IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model.
Powerful streaming media protocols supported and full service function
P1 needs to work with Kiloview CellCentre 4G bonding streaming media platform (software). CellCentre platform is a cloud server platform provided by Kiloview, connected via Phone APP to enable or stop 4G bonding service. CellCentre fully supports RTMP/HLS/TS and RTP/RTSP/ protocols. CellCentre push bonded video streaming live to many global live video platforms, or providing video transit and distribution, 20-50 concurrent users to access simultaneously. {Note: Only with P1 hardware couldn’t realize bonding transmission, but could finish normal encoding/transmission and pushing functions}
Easy operation and professional quality
P1 allows you to use Web interface to manage device, as well as Phone/PAD App.
Other features
Supported global live video platform (tested): YouTube, UStream, Twitch and so on.; Supported streaming media server platform/CDN system (tested): Wowza, FMS, RED5, SRS, etc.; Local storage and recording based on Micro SD/TF card; Support image rotation, cutting, gray scale and other special image processing; Support character /image overlay; Support quick function customization (Please contact salesman or factory technical support); Two-way voice intercom function (based on factory provided solutions or for customization).
Main parameters
Interface
Operation button
Network support
Signal and formats
Encoding
Video input Analog video input Analog video output SIM card slot USB Micro SD
Red button Black button
4G-LTE built-in Wi-Fi
Interface standard
Supported video formats
Audio
1*BNC SDI Based on USB extend Microphone input or Line-in input 1B*a3s.e5dmomn USB extend Headphone input or Line-out output 2*Micro SIM card slot 2*USB 2.0 Type-A 1*Micro SD/TF Card storage interface
Power key Function key
4G-LTE module Built-in Wifi module, IEEE 802.11 b/g/n/ac Dual-band (2.4G/5.8G),external antenna
SD/HD/3G SDI 1080p23.98/24/25/29.97/30 1080p50/59.94/60 1080i50/59.94/60 720p23.98/24/25/29.97/30 720p50/59.94/60
stereo SDI AES/EBU audio
Video encoding
Multi-stream supported
Audio encoding Encoding latency Video encoding bitrates Audio encoding bitrates
H.264/AVCHigh profile (up to level 5.1), compatible with Main profile and Baseline
Support multi-stream encoding, including Main /Sub stream and Motion JPEG image encoding Main stream: up to 1080p60,the highest bitrate is 30Mbps Sub stream: up to 960*540,the highest bitrate is 4Mbps Motion JPEG: up to 1920*1080 encoding
AAC/MPEG4-Audio, G.711 (u-Law/a-Law) {Other algorithm can be extended}
67ms 256Kbps~30Mbps adjustable
32Kbps ~ 512Kbps : AAC encoding 64Kbps : G.711 encoding
Transmission protocols and Management
protocols
Transmission protocols Management protocol
Management ways
Working environment
Size and accessories
Battery
Management interface
Remote management Online firmware updating
Power Operating temperature Relative humidity Power consumption
Size Weight Wi-Fi antenna 4G antenna Power adapter
Standard Volume Life time Fixing Charging methods
RTP / RTSP (compatible RTP over RTSP, RTSP HTTP Tunnel and RTSP Multicast) RTMP pushing, RTMP service, TS over UDP, HLS
HTTP
Web and Android APP
Support Support
DC 12V 1A -4 to 131°F / -20 to 55°C 20 ~90%RH(un condensation) 6.5W Max
115 x 75 x 35 mm 420g Built-in PCB antenna 3db rod-like antenna External DC 12V 1A adapter
built-in lithium battery, external l5V mobile power supply 3.7V 6800mAh29.6Wh > 3 hours 1/4″ hot shoe screw 12V 1Apower adapter charging
Contact us
Email: [email protected] Web: en.kiloview.com
Kiloview2023 - Kiloview
